From FlightGear wiki
Revision as of 13:43, 17 August 2015 by Mickybadia (talk | contribs) (Minor: quick bug fix update r6b)
Jump to navigation Jump to search
ATC-pie logo
ATC-pie at the KSFO mess
ATC-pie at the KSFO mess
Developed by Michael Filhol
Initial release February 1, 2015
Latest release August 17, 2015 (r6b)
Written in Python3
OS Any
Platform Qt5
Development status Active
Type ATC client
License GNU GPL v3

ATC-pie is an air traffic control simulation program featuring solo training and a multi-player game mode to connect to FlightGear networks. It is essentially designed for realism, and simulates many features of real-life ATC tasks such as transponder identification, strip rack and sequence management, handovers to/from neighbouring controllers, ATIS recording, flight plan editing, routing and conflict solving.

ATC-pie is free and open source, programmed in Python3 for Qt5 hence system-independant, only Python3 and its Qt5 bindings must be installed. That done, it is meant to work straight away, with no make/compile command to run or external resource to install (except for local tower viewing, which requires FlightGear and the appropriate scenery).

Program features

The features listed below have been tested on various Linux versions, Mac and Windows.

Game and environment

World data:

  • Real world METAR updates from selectable weather station
  • Real world declination lookup and true/magnetic distinction
  • Airport and navigation data retrieved from the latest X-Plane file set
  • Custom additions possible in separate files

Multi-player and network environment:

  • Multi-player game mode with configurable FGMS connection
  • ATC handovers: strip exchange with OpenRadar and other ATC-pie instances in range
  • Interface with Lenny64's flight plan data base, including in-game FPL retrieval, filing and editing
  • In-app session announcement facility to post on Lenny64's popular ATC event page
  • Ignore contacts

Solo game mode:

  • Free combination choice of APP, TWR and DEP control positions for custom training
  • Handovers to/from virtual ATCs
  • Instruction interface and pilot read back
  • Adjustable difficulty (traffic density)
  • Departure–arrival and ILS–visual balance options
  • Configurable runways in use, entry and exit points


  • Floatable, dockable and closable GUI panes: strips, radios, text chat, etc. (window layout saved)
  • Notification system combining selectable sounds, status bar messages and a time-tagged history
  • General and airport-specific settings and notepads saved on close and restored on restart
  • Customisable colours

Radar and visual contacts


  • Full support and mode-dependant behaviour (off, A, C, S)
  • Choice of simulated mode for non-equipped aircraft models
  • Radar identification assistant (unique squawk link between radar pick-up and strip assignment detection)
  • Individual and general cheat modes to override XPDR settings or reveal those turned off

Radar scope:

  • Open multiple radar screens
  • Custom radar background drawing and image display (e.g. to display real procedure charts)
  • Variety of show/hide options for navigation points, vectors and route assignments, etc.
  • Quick point-to-point heading & distance measuring tool
  • Custom text labels to annotate radar background

Tower viewing:

  • Real-time rendering of the airport scene from tower viewpoint, available in all game modes
  • Internally started (requires FlightGear installed) or through connection to an external instance
  • View controller pane and direct free look/zoom from the view
  • Easy use of custom scenery and aircraft model addition/substitution

ATC management

Strips, racks, flight plans:

  • Strip drag&drop along and across user-defined racks, with configurable colours
  • Strip drop on neighbouring ATCs to hand over
  • Link strips to flight plans and radar contacts to merge editable details and inform radar display
  • Conflicts between linked elements reported
  • Work with local FPL copies and manage sync with online publication

Routes, vectors, conflicts:

  • Route parsing and drawing
  • Current leg and next waypoint display with geodesic calculations of headings and distances
  • Assign vectors and change routes with direct mouse gestures
  • Anticipated route conflict warning and separation incident alarm
  • Visible mismatches between assigned vectors and picked up positions



  • FGCom integration, incl. echo test and possible use of externally running client
  • ATIS recording with information letter and pre-filled preparation notepad
  • Multiple and single frequency transmissions
  • Frequency-specific sound level selection

Text chat:

  • Custom preset message list and automatic line completion
  • Preset and custom text aliases for context-sensitive replacements
  • Message history and single-click message recall
  • Hardcore communication sim possible by disabling unknown senders' callsigns


Playing solo mode with three coloured racks  
Tower viewing, following a departing aircraft  
Radar identification marked in blue  
Depiction of airport tarmac and objects  
Background image display  
Hand drawing for LSGG procedures  
All-in-one display of assignments  
Horizontal separation rings  
Route conflict warning  
Strip detail sheet with editable route  
ATIS recording feature with scrap notebook  

Working principles


You are the air traffic controller, and players will connect to the network (or AI traffic be simulated in solo mode) with different types of aircraft and transponder equipment. As in real-life, the radar is SSR, hence will show you only (unless you cheat) what you pick up from on-board transponders in your range. That means:

  • If a transponder is off or on standby, you will not see the aircraft on your radar screen.
  • If a transponder is on, you will at least be able to see its position and read the transponder code, possibly its altitude and even its type and callsign, depending on the mode set by the pilot.


Your basic traffic flow and sequence working unit is the strip, each representing a controlled (or soon expected) aircraft. Strips are created, filled with details and moved along and across racks until handed over to a different controller or discarded. Strip details include:

  • most importantly, the aircraft's callsign, to be used on the radio;
  • information like aircraft type, airspeed, route... that can be specified by the pilots themselves when filing flight plans;
  • transponder code and flight parameter assignments (or vectors: heading, altitude/FL, speed).

Linking strips

Strip details can be manually edited, but every strip can also be linked to a flight plan and/or a visible radar contact on the scope screen—a strip can only be linked to one flight plan and one radar contact. Linking to a strip will automatically:

  • make the strip display the missing elements made available by the linked aircraft transponder or flight plan;
  • label the radar contact dot with the more informed linked details, e.g. assigned altitude.

Any detail mismatch between a strip and its linked flight plan or radar contact will be reported for you to resolve.

Radar identification

To identify an aircraft and link the right radar contact to a strip, an ATC can rely on different things. He can read an aircraft's callsign straight away if its transponder has mode S turned on, tell from reported positions and altitudes, or use a transponder code. For instance, say a VFR traffic makes an initial radio contact giving his callsign and approximate position. ATC will typically pull out a new blank strip and give the pilot a unique transponder code to squawk, writing it on the strip alongside the announced callsign, then wait for it to appear on the radar. This allows for radar identification of aircraft–strip pairs such that:

  • the strip is assigned a transponder code;
  • no other strip is assigned the same code;
  • the aircraft is the only one squawking that code in radar range.

ATC-pie identifies such pairs automatically and reports them to you so you can properly link the two and get back to the pilot: "radar identified".

User guide

This section helps one download and run ATC-pie, and lists a few tips on some of its features. Other sources to learn to use the program are:

  • the online video tutorial on YouTube (follow/bookmark the link to the full playlist);
  • the in-app quick reference available from the Help menu (summary of mouse/keyboard gestures, display conventions, etc.).

Anyone motivated to write a full user guide is obviously welcome to contact the developer.

Getting it to run


There are essentially two ways of downloading ATC-pie: one is to download a tarball to extract locally; the other is to clone the Git repository. The latter requires Git, but will keep you in sync with updates more easily. Your choice. In either case, you will have no compiling to do (make, etc.), but do make sure you have the few dependencies installed (e.g. Qt5), listed in the README file.

Downloading the tarball:

  1. get the latest stable version from the project page;
  2. extract the files to the directory of your choice.

To clone the repository:

git clone git:// ATC-pie

When a new release is announced and if you have cloned the repository, you can update your software with a single command from the downloaded directory:

git pull

Starting the program

Depending on your system and preference, you might be double-clicking, typing stuff or pulling your hair out. In any case what you need to start the program is to run a Python3 interpreter on the file in the top-level directory. To start at a chosen airport location, say with code ICAO, add a system command line argument, which may look as simple as:


If no ICAO code is given, good old KSFO will be chosen as default. After a few seconds, you should see the main window appear with a radar scope and a depiction of your airport in the centre.

Additional command line options are available:

Option Effect and argument specification Default
--tower-view-external=host Avoid running an internal FlightGear process for tower viewing, and specify a host on which a viewer is running. This may still be "localhost". (none, start internal process)
--tower-view-ports=udp,telnet Specify the tower view ports to send/connect to. These can be the same (UDP+TCP on same port), and are used whether the view is a child (internal), local or remote process. 5010,5010
--add-view=host:port Register an additional FlightGear instance to forward MP and solo game packets to. This option can be repeated. (none)
--views-send-from=port Change the local UDP port number to bind for sending FGMS packets to views. This includes all tower and additional views, but does not affect the multi-player connection ports, chosen on MP connect. 5009
--fgcom-server=address Set the server used by internal FGCom radio boxes.
--fgcom-ports=list-spec Specify a comma-separated list of port numbers for internally started radio boxes. The first one becomes reserved for echo test and ATIS recording while every other port will allow for an additional radio box in the game. Alternatively, enter a string of the form reserved+nboxes as a shortcut for a contiguous range of nboxes+1 ports. 16665+4 (port 16665 reserved, plus 16666 through 16669 for up to 4 radio boxes)

Running for the first time

A few things you can do when running ATC-pie for the first time:

  • If you intend to use the radio like you should in multi-player games, check the FGCom version setting in the System menu, and try an echo test. Read the resources/fgcom/Notice file if you have problems hearing yourself, and check the FAQ section in this article.
  • If you want to use the tower viewing system and not bother making it external (see feature note below), make sure you have the right command set for your FlightGear installation, as well as the scenery directory if you have one to enter.

Feature notes

This section describes a few major features. See more exhaustive list at the top of this article.

Routing and conflict warnings

ATC-pie analyses routes and assigned vectors to assist traffic management and anticipate path conflicts between controlled aircraft.

A route is parsed for every strip with valid departure and arrival airports, as follows:

  • tokens in the route field are whitespace-separated;
  • each recognised navpoint token (world navigation aid, airfield, fix, RNAV point) creates a waypoint on the way to destination, and a route leg from the previous waypoint;
  • other tokens are kept as route leg specification to the following waypoint;
  • if ambiguous, a waypoint is always the nearest homonym to the previous, i.e. to the point beginning the leg.

When a route is parsed correctly, "OK" shows near the route field on the strip detail sheet, and if a radar contact is linked:

  • the strip shows only the remainder of the route for this contact, based on distance to destination;
  • the route to go is drawn as a dotted line on the radar scope when the contact is selected (unless turned off);
  • the current route leg is displayed in the selection info pane with its specification string if any;
  • the info box contains the current waypoint and geodesic heading to reach it.

If no route can be interpreted (missing or invalid DEP or ARR), "!!" is displayed on the detail sheet and linked info boxes will show the strip destination detail (ARR) if it is filled.

ATC-pie also features a conflict warning system, which can be activated or turned off from the Options menu. It uses route and vector assignments to anticipate path conflicts and alert you to take action and prevent separation losses.

When looking for conflicts, a horizontal (ground projection) path is considered for every aircraft with a linked strip and a parsed route or an assigned heading vector. An aircraft is assumed to follow its route, unless a heading vector is given in which case it is assumed to be flying the assigned straight course. Path conflicts occur when horizontal paths intersect and the intervals between respective current and assigned altitudes overlap. When no altitude is assigned, the interval is one around the current altitude. When an aircraft's altitude is unknown, any assigned altitude will be considered instead.

Another (more serious!) possible alarm is the separation incident, which calls for immediate action. The table below summarises the different levels of conflicts, ranked in decreasing order of emergency.

Conflict warnings in ATC-pie
Alarm Shown on scope (default colours) Meaning
Separation incident Bright red intersecting circles Separation loss between aircraft, a serious ATC mistake!
Path conflict Red circles and paths Anticipated paths and altitudes are intersecting
Possible path conflict Yellow circles, red paths Ground projection of paths are conflicting but not all altitudes are known

Solo training mode

This mode allows to train on your own in different situations. Three combinable positions are available:

  • tower (TWR), controlling runways and immediate surroundings;
  • departure (DEP), bringing departing traffic to their exit point;
  • approach (APP), vectoring arrivals onto final.

In any case, you will be controlling virtual IFR planes via the software interface, and receiving and handing over strips to virtual ATCs, depending on your position and on the aircraft's intentions (see table below). Approaches can be requested ILS or visual, and the balance between the two is adjustable from the solo mode settings.

Assuming APP, aircraft requesting ILS must be vectored to intercept a runway localiser and cleared for ILS approach, whereas those requesting visual require vectors until they report the expected runway is in sight. Then, approaching aircraft must be handed over to TWR, unless you are in the TWR position as well. If you are, you must clear them to land—or they will climb back up for go-around—and hand them over to ground control (GND) once they have vacated the runway. Tower also manages departures, which appear ready holding short of runways. After take-off, hand over your strips to departure control, unless assuming DEP yourself. When doing DEP, you must hand outbound aircraft over to the en-route centre (CTR) once they are high enough and close enough to their exit point if specified.

Handovers with virtual ATCs
Departure strips Arrival strips
Assuming positions Receive from Hand over to Receive from Hand over to

Vectors are given by means of the vectoring assignment tool (click&drag on radar contact for heading, with SHIFT for altitude/FL and speed). Other instructions (line up and wait, clear to land, etc.) can be sent from the instruction dock. Pull it up from the View menu if it is not visible. Non-vectoring instructions are sent to the callsign entered in the top field, which should fill automatically on aircraft or strip selection if a callsign is known.

Things you can train for:

  • approach in dense traffic: select APP position only and increase traffic density;
  • towering a single runway, optimising its use: select TWR position and an equal balance of departures and arrivals;
  • change of runways (e.g. irl after wind direction change): start with APP+TWR and select a runway for arrivals at least, play for a while and go back to the dialog to change for the opposite runway;
  • etc.

Tower viewing

This feature allows you to overlook your airport and the connected (MP) or simulated (solo) traffic, like a controller from a tower viewpoint. It uses the tower position specified in the source data if any, otherwise defaults to somewhere over the airport to allow towering all available airports.

There are two ways of activating a tower view. You may let ATC-pie start its own suitably configured FlightGear process, or have it connect to an external viewer, manually set up and accepting connections. The latter way takes a little more effort but allows to run FlightGear on a different machine and thereby relieve your session from the CPU load a local instance induces. If you are going for that, start ATC-pie with --tower-view-external and check the port-related command line options in the table above to set it up correctly.

Running internally only requires FlightGear installed on your computer. A basic installation is enough, but:

  • not all aircraft will be drawn properly if you do not have the corresponding models installed—it is up to you to add models or create substitution links (in your FlightGear tree structure or according to the resources/fg-aircraft/Notice file), or be happy with the default blue and yellow glider that will stand for any missing model;
  • more importantly, you will need the scenery for your airport if you want anything exciting to see (and not sea!)—go to this page or use TerraSync to download it to your computer, and add it to your FlightGear setup or set the right scenery directory in the System menu (ATC-pie will pass it on to FlightGear and save your setting).

In either case, once activated from the View menu, the tower view controller pane is enabled and you can turn to runway points, follow selected aircraft, etc. Additionally, use right click and drag directly on the view to look around, and you may use the x/X keys to change the zoom level from the view window.

Multi-player strip exchange (handovers) and OpenRadar interoperability

The handover feature in ATC-pie is based on OpenRadar's exchange server to enable ATC coordination between users of both software programs. However, it is to note that their philosophies differ in several ways:

  • OpenRadar's basic processing unit is the FGMS callsign, whereas ATC-pie's is the strip;
  • OpenRadar's concept of handover is based on a shared notion of aircraft ownership, whereas ATC-pie allows any controller to pull out a strip, write any callsign and link it to a radar contact;
  • in the OpenRadar philosophy, a handover must be acknowledged by the receiver for the sender to lose ownership and for all neighbouring OpenRadar users to see the handover complete, whereas ATC-pie considers that a strip sent through the hand-over pipe is gone and should land directly on a receiver's rack at the other end, without anybody else necessarily to know.

For most interactions to work while still respecting both philosophies as much as possible, the following principles were chosen:

  • ATC-pie users can only hand over strips that are linked to a radar contact (no lone strip can be sent);
  • aircraft under ATC-pie control are not shown as "owned" to OpenRadar users;
  • handovers from ATC-pie will fail if an OpenRadar user in range is claiming ownership;
  • when sending to ATC-pie controllers, OpenRadar users will see their transfers acknowledged straight away, unconditionally.

Callsign exchange policy:

  • O-R to ATC-pie: FGMS callsign will appear on the strip, as if the sender had filled the detail properly;
  • ATC-pie to O-R: callsign resolved for the receiver, sender's entry will reappear next time ATC-pie handles the strip;
  • pie-to-pie handovers: strip detail preserved, whether present or absent.

In practice, in ATC-pie, a strip can be handed over by dropping it on the chosen ATC in the list of connected controllers in range. Received strips appear unlinked on the reserved rack, with an identification of the sender which disappears as soon as the strip is clicked on.

Background drawings

Background drawings allow to decorate radar scopes with all sorts of maps and useful information about the airspace, terrain or procedures.

There are two ways of drawing in the radar background. One is to import image files with transparency, the other is to write a text drawing specification file to draw coloured lines and label points. This allows to import anything from the most complex coloured height map to the the most schematic airspace outline. All images are positioned and drawing points specified using lat/lon coordinates or navpoints in radar range. The resources/bgdrawings/Notice file explains how to import and create background drawings.

For example, you can map out SID/STAR routes with one image per published chart, named by procedure and associated runways to make in-game selection easy. If you want more than schematic line plots of the procedures, the best way is certainly to draw the images yourself with good enough resolution, e.g. with Gimp. Superimpose a drawing layer on top of a real map canvas, or over a screenshot of your ATC-pie radar with pinned navaids as landmarks. If you have proper to-scale documentation, it is worth trying the command below (requires ImageMagick) to turn the white background of a ready published chart into transparency, and checking if the rendered images are acceptable and zoom-resistant enough.

convert -transparent white input-file.png output-file.png

Use the image positioning helper tool in the System menu if you want to adjust image corners visually rather than programmatically. All visible pixmap drawings will be moved simultaneously, so you can work with several at a time if you need to. On dialog box close, a file is generated in the output folder for you to open and copy/edit, or use as a direct substitution.


Here are a few tips to help you navigate and use the program.

FGMS callsigns for ATCs typically start with the ICAO code of the controlled airport or sector, and end with a hint on the provided service: twr, gnd... When choosing your callsign on MP connect, make sure it is unique, and note that FGMS restricts callsign length to 7 characters. :-(

Interface and information display

The Options menu is divided in three sections, respectively:

  • session options: go back to their default setting on restart, e.g. rack sync option;
  • airport-specific settings: saved and restored when restarted at same airport, e.g. runway ILS capability;
  • global settings: saved and restored regardless of airport, e.g. preset text chat messages.

You can customise the radar colours by editing the colour codes in the settings/colours.ini file generated on first run.

Heading displays are mostly magnetic so they can be read out to pilots. The only exceptions perhaps are the navigator and handover list tooltips, for easier human identification on the scope. All directions are geodesic.

The transition level displayed in the weather analysis is the lowest flight level that is still above the transition altitude. This does not mean the lowest to be expected in ATC clearances, which may be higher, for more vertical separation on either side of the transition layer or due to coordination with neighbouring zones and fields.

The grouped tick marks along the localiser line (when shown) indicate best altitudes AMSL for final approach along the defined flight path angle: every mark in a group is 1,000 ft.

Radio and text communications

Several radios can be opened and tuned in at once, and you can talk on either one by holding the PTT mouse button down for the chosen radio box. The left-Ctrl keyboard key will also let you PTT on selected frequencies. You can transmit on several at once, for example to service GND+TWR frequencies in view of splitting them seemlessly again if a controller is expected soon to fill one of the two positions. Tick the Kbd PTT option in the radio boxes of the frequencies to merge. Your keyboard PTT key will then transmit on them all simultaneously. Note that while you will be broadcasting on, and hearing incoming transmissions from, all frequencies, pilots will not be hearing each other across frequencies.

Say you are TWR coordinating with GND at your airport, and you want to monitor both radio frequencies while you are only in charge of TWR. To set this up, start your radio box on TWR frequency and turn on a second one to monitor GND. Tick "Kbd PTT" only for TWR so that you only transmit to your frequency and don't interfere with the other, and set the volume to "soft" on the latter so that you can tell the radio you are hearing the messages from, and know if it is for you to answer.

The PTT turns off sounds option is recommended for those of you who do not wear headsets, as it will avoid GUI sound notifications being picked up by your microphone while transmitting on frequencies.

For more efficient text chat, text aliases are available and allowed in both instant and preset chat messages, e.g. $wind, $qnh... When the containing message is sent, they automatically expand to the current context-dependant value. Custom aliases can be used, whose replacement will be searched for in the general and airport notes (your notepads) and in the selected strip comments. This allows for variable text by controller, by airport and by radar contact. Have a look at the Quick reference available from the Help menu, Text aliases section. Unsuccessful replacements will trigger an edit box so that you can review your message before sending it.

Everything up to the first pipe character (|, if any) in a text chat line will be stripped before the message is processed and sent. For quicker access to preset messages if you use them and the keyboard a lot, you can therefore prefix your messages with a custom shortcut and a pipe, which will enable autocompletion to pull up the desired message line as you start typing the prefix. Here is a preset message example enabling something like a dot-command for sending a bearing to your airport to the currently selected pilot:

.qdm|Heading to airport $qdm

Strip and flight plan details

Every initial contact by a pilot should basically make you hit F2 and enter at least the call sign announced. You should then soon figure out if:

  • a flight plan is filed, in which case you can save the strip relatively quickly and look for the FPL to link to it (middle click on the FPL entry);
  • a flight plan must be filed (e.g. IFR departure not filed by lazy pilot), which only takes a tick in the bottom-line box before saving to open a freshly linked FPL detail sheet to fill;
  • he was asked to contact you by a previous ATC, in which case you may have a strip handed over to you already (check the unassigned strip rack);
  • etc.

In airport input fields, typing a single dot will instantly fill the box with your ICAO position. Use this as a shortcut from/to your airport when filling details.

Resolving strip–FPL conflicts:

  • to confirm strip details: open the strip detail sheet, tick the "push details to FPL" box and save to propagate the strip details;
  • to confirm FPL details: "pull FPL details" from the button menu to reset the conflicting strip details to the values filled in the linked flight plan;
  • to confirm some details of each source: open the strip sheet, get rid of the bad details before pushing to the flight plan.

Resolving local–online flight plan conflicts:

  • to update the online version with your local modifications, double-click the flight plan and tick the "publish" box before saving (if still decorated red, there was a network problem or the change was rejected by the server);
  • to discard all local modifications of an online FPL, remove the FPL from the list and check for new flight plans again (the deleted entry should be retrieved with online state).


Questions frequently asked (at least twice) about the program:

Q: How do I start anywhere else than bl*ody KSFO?

A: Use a command line argument: ./ ICAO

Q: Why am I not seeing this aircraft on my radar? I know it is there: the pilot is sending chat messages and/or it is visible on the online live map...

A: You only see an aircraft on your screen if your radar picks up a transponder signal from it. The two following cases will therefore prevent you from seeing a connected aircraft:

  1. Its onboard transponder is turned off, i.e. not responding to your radar ping, and you should tell the pilot to switch it on. See the ATC-pie video tutorial 1. If the aircraft model does not support the transponder feature, it will be simulated by ATC-pie according to the fallback mode you have selected in the settings dialog; any non-zero mode will do. Another, more radical way is to cheat with menu options "reveal OFF/STBY" or "radar cheat mode" (tutorial 3).
  2. The aircraft is under the radar floor setting. Check in the General settings dialog; set it to "SFC" to pick up all signals.

Q: What is the strip exchange server? Which one to use?

A: The strip exchange feature allows you to hand over strips to ATCs who are connected to the same server and within 180 NM from your position. The public server currently open for general multi-player use is To hand over a strip, drag it from its rack and drop it on the chosen callsign in the ATC handover list. Publicise your frequency so that ATCs around know what to tell pilots for them to contact you!

Q: What nickname should I use for the strip exchange server? Where to get my ID?

A: This feature is not linked to any account or identification process; just choose any name you would like to be recognised by. It will appear in a tooltip over your callsign in the handover list of ATCs who will connect near enough to see you. In a sense, this feature is more social than technical, but makes sense as typical ATC callsigns remain mostly anonymous over MP. Use this field so that other players can identify you.

Q: Can I draw SID and STAR procedures on the radar?

A: Yes, and virtually anything else, using background images and hand drawings. To learn how, see the corresponding section above, read the resources/bgdrawings/Notice file and have a look at the packaged example for KSFO.

Q: FGCom radio is not working. What is going on?

A: There can be a variety of reasons, all of them to rule out before reporting a bug in the program. Start a single ATC-pie instance and try the echo test (System menu). If it works, you may skip directly to item 3 below.

  1. Bad FGCom version setting
    Verify the "FGCom version" set in the System menu, which should point to the right executable file under resources/fgcom and suit your operating system (see Notice file). Four versions are initially packaged with ATC-pie: Linux64, Linux32, Mac, Win32.
  2. FGCom server down
    This can happen, unfortunately even for up to a few days. Check for responses from the server, e.g. with ping
  3. FGCom subprocess error
    If the server is up (responding to ping), check for errors in the logged FGCom output files in the output directory.
  4. Port mess-up on your side
    If you are running multiple instances of ATC-pie, make sure you have no more than one radio box on every port. In any case, verify you only choose available ports that are not already in use by your operating system for example. Typically, default ports (from 16661 counting up) work fine, but you will have to change them for parallel instances, using the --fgcom-ports command line option (see section: starting the program). To check what port a radio box is using, see its "on/off" button tooltip.

Q: Why is my tower in the middle of the sea, and aircraft water landing/floating?

A: You are missing the FlightGear scenery data for your location, or ATC-pie does not know where it is. Check out the Tower viewing feature note in this article.

Q: Tower view is not starting. The menu option is ticked but nothing happens.

Your FlightGear executable is probably wrong. From a terminal, try executing exactly what you have in the menu setting and check that FlightGear does not start there either. If it indeed does not, find the right command first and give it to ATC-pie. It will be saved after that, and your tower view should work.