Pias Airport

From FlightGear wiki
Jump to navigation Jump to search
Pias Airport
Pias Airport Scenery
Pias Airport Scenery
IATA: ICAO: SPIS
Type Public
City Chagual, Pataz - Sierra de la Libertad, Peru
Runways
Runway Length Material
14/32 1500 x 30 m asphalt
Scenery tile w080s10
TerraSync n.a.
Download


Pias Airport is situated about 10nm from Chagual Airport. The final approach is a little complicated and risky because of the high mountainous terrain of the Coordillera and a descend rate of approx 2.000 feet per minute.

Flying at Pias

Remarks

  • RWY 14 Direction 146° asphalt
  • RWY 32 Direction 326° asphalt - Displaced Threshhold 250m/820ft
  • RWY Dimension 1.505x30m/4.940x98ft
  • Elevation 1915m/6.280ft MSL
  • Start-up position on the apron: Start

Navaids

  • TRU TRUJILLO 116.30MHz 079°/88.7nm
  • BTE CHIMBOTE 112.50MHZ 031°/95.8nm
  • MAR CAJAMARCA 300.00MHz 309°/63.6nm
  • ATA ANTA-HUARAZ 415.00MHz 179°/92.8nm

ATC

FIR LIMA

  • UTA 128.1, 128.8, 128.5 MHz Centro de Control de Área de Lima [above FL245]
  • CTA 128.1, 128.8 MHZ Lima ACC [MEA until FL245]
  • TMA 119.7 MHz Control de Aproximación
  • ATZ 118.1 MHz Torre de Control

Nearby Airports

High Altitude Operation

  • Choose an aircraft wich allows a service ceiling more than 10.000 ft like the PC-6, B200 or AeroStar700
  • Reduce the fuel to a minimum
  • Reduce your load, every 10% under the gross weight increase the performance about 20%
  • Choose flaps for take-off depending on the maximum deflection of the aileron. Not much more.
  • Pre-lean your engine and give a bit of throttle to get the engine started
  • Check your indicated airspeed again and again

Scenery

Pias Airport

In TerraSync this airport not exist (status 01/2016). You have to download a custom scenery.

Scenery Add-on

A custom FGscenery_Chagual package is available for download. This Scenery add-on contains airport data, airport layouts, airport buildings and more which are not available via Terrasync. Note: to use the start-up positions in-sim, select your starting position via the [Location -> Select Airport] menu. Type in the name of the parking position, press enter (important!). Then select [Go To Airport].

Always get the newest development version automatically: Download the FGscenery_Chagual.zip

Features

  • All airfields of the Province of Pataz included
  • Sloped runways at all airfields
  • Detailed, phototextured and handcolored 3D models of buildings
  • fully Rembrandt compatible
  • Challenging take-offs, approaches and cloud flying