Seneca II Checklist

From FlightGear wiki
Jump to navigation Jump to search

For Piper PA34-200T Seneca II

Simulator's checklist for the SenecaII

Speeds

  • Rotate 71 kts
  • Vx 76 kts
  • Vy 89 kts
  • Initial climb 90 kts
  • Cruise climb 100 kts
  • Vref 90 kts
  • Gear extension 130 kts
  • Gear up 108 kts
  • Flaps 10:138 kts, 25:121 kts, 40: 107 kts

Cockpit Check

  • CABIN DOORS closed&checked
  • ALL SWITCHES off
  • GEAR LEVER down
  • CIRCUIT BREAKERS checked
  • PARKING BREAK set

Before Start Engine

  • BATTERY MASTER on
  • ATIS copied
  • RADIOS off

Start Engine

  • COWL FLAPS open
  • FUEL SELECTORS on
  • MIXTURE full rich
  • PROPELLER high rpm
  • THROTTLE full
  • BEACON on
  • MAGNETOS on
  • PRIMER 5-10 secs
  • THROTTLE 1" open
  • ENG STARTER until 500 RPM
  • THROTTLE 1000 RPM

After Start Engine Check

  • THROTTLES 1000 RPM
  • ALTERNATOR both on
  • OIL PRESSURE checked
  • AMP METER checked
  • ANNUNCIATOR checked
  • RADIOS on
  • ALTIMETER set
  • GYRO slave

Taxi Check

  • BRAKES checked
  • INSTRUMENTS checked
  • FLIGHT CONTROLS checked
  • X-FEED checked
  • FLAPS checked and set
  • TRIM set for t/o

Before Takeoff Check

  • FUEL SELECTORS on
  • CLEARANCE received
  • DEPARTURE BFIEFING complete
  • EMERGENCY BRIEFING complete

Line Up Check

  • LANDING LIGHT on
  • ANTI ICE as required
  • GYRO checked

After Takeoff Check

  • LANDING LIGHT off
  • GEAR up
  • FLAPS up
  • CLIMB POWER 31"/2450RPM

Cruise Check

  • CRUISE POWER set
  • MIXTURE set
  • COWL FLAPS close

Approach Check

  • WEATHER copied
  • ALTIMETER set
  • FUEL SELECTOR on
  • GYRO checked

Final Check

  • GEAR down/3 green
  • PROP high rpm
  • MIXTURE rich
  • FLAPS set
  • LANDING LIGHT on

After Landing Check

  • ANTI ICE off
  • PITOT HEAT off
  • STROBE LIGHTS off
  • FLAPS up
  • COWL FLAPS open

Related Content