6,566
edits
(Removed the cockpit screenshot now in the infobox.) |
|||
(37 intermediate revisions by 13 users not shown) | |||
Line 1: | Line 1: | ||
{{ | {{:{{PAGENAME}}/info}} | ||
}} | |||
== Introduction == | == Introduction == | ||
[[ | [[File:SenecaII_real.jpg|thumb|250px|The real Seneca II]] | ||
This is a model of a Piper PA34-200T | This is a model of a '''Piper PA34-200T Seneca II'''. The Seneca has been made by [[Piper]] since the early 1970's and some 4500 were made since then. It has six seats in a pretty large cabin, two turbocharged counterrotating engines producing 200hp up to 12,000 ft. It cruises at 170ktas in 12,000ft at 65% power. Certification for flights into known icing conditions and the nice single engine behaviour made the Seneca a popular multi engine trainer. | ||
The model was built using the Pilots Operating Handbook, a real Seneca (D-GEJL) and some flight performance data derived in real flights. | The model was built using the Pilots Operating Handbook, a real Seneca (D-GEJL) and some flight performance data derived in real flights. | ||
== Features == | == Features == | ||
=== Full functional 3d cockpit === | === Full functional 3d cockpit === | ||
Almost all controls, switches, gauges and indicators are implemented and functional in the cockpit. For description of the panel have a look at the [[Seneca II Panel Reference]]. | |||
The default KI227 ADF indicator can be exchanged into a KI228 RMI indicator coupled to ADF and NAV1 radio. | |||
To use the KI228, simply set the property | |||
/instrumentation/adf/model | |||
to | |||
ki228 | |||
in the property browser or use the command line switch | |||
--prop://instrumentation/adf/model=ki228 | |||
when starting up the Seneca | |||
=== Tutorials === | === Tutorials === | ||
Using the menu items | Using the menu items ''Help->Start Tutorial'' a bunch of tutorials are reachable. | ||
* | * '''Cold Start''' Puts your aircraft into hibernation mode. Everything is off. | ||
* | * '''Hot Start''' Everything is ready to go, just start the engines and fly. | ||
* | * * '''Check''' These are the checklists from [[Seneca II Checklist]] | ||
=== Structural Icing === | === Structural Icing === | ||
[[File:SenecaII_icing.jpg|thumb|250px|Icing on the temperature probe]] | |||
Since the Seneca provides anti- and deice equipment, I tried to model structural icing into flightgear. A little nasal script does most of the work: First it reads the property nodes under /sim/model/icing where any number of iceable elements configure the ice sensitive elements of the aircraft. Each element have a name, a sensitivity to icing, may have a salvage control and the name of a output property where the collected amount of ice is written to. After the initial configuration, a timed loop is executed every 2 seconds. It | Since the Seneca provides anti- and deice equipment, I tried to model structural icing into flightgear. A little nasal script does most of the work: First it reads the property nodes under /sim/model/icing where any number of iceable elements configure the ice sensitive elements of the aircraft. Each element have a name, a sensitivity to icing, may have a salvage control and the name of a output property where the collected amount of ice is written to. After the initial configuration, a timed loop is executed every 2 seconds. It | ||
* calculates the spread by OAT and dewpoint | * calculates the spread by OAT and dewpoint | ||
Line 98: | Line 93: | ||
|} | |} | ||
When oat is above zero degc, Ice melts at a rate of 0.5" per 10NM at 10degc, the warmer the faster. | When oat is above zero degc, Ice melts at a rate of 0.5" per 10NM at 10degc, the warmer the faster. | ||
=== Pitot Icing === | === Pitot Icing === | ||
Line 117: | Line 111: | ||
|- | |- | ||
|Rated Horsepower | |Rated Horsepower | ||
|Sea | |Sea Level: 200, 12,000ft.: 215 | ||
|- | |- | ||
|Rated Speed (rpm) | |Rated Speed (rpm) | ||
Line 236: | Line 230: | ||
|- | |- | ||
| colspan="3" align="center" | | | colspan="3" align="center" | | ||
'''CAUTION''' | |||
Maneuvering speed decreases at lighter weight as the effects of aerodynamic forces become more pronounced. Linear interpolation may be used for imtermediate gross weights. maneuvering speed should not be exceeded while operating in rough air. | Maneuvering speed decreases at lighter weight as the effects of aerodynamic forces become more pronounced. Linear interpolation may be used for imtermediate gross weights. maneuvering speed should not be exceeded while operating in rough air. | ||
Line 298: | Line 292: | ||
|- | |- | ||
| Maximum Cylinder Head Temperature | | Maximum Cylinder Head Temperature | ||
| 460 & | | 460 °F | ||
|- | |- | ||
| Maximum Oil Temperature | | Maximum Oil Temperature | ||
| 240 & | | 240 °F | ||
|- | |- | ||
| Minimum Oil Pressure (red line) | | Minimum Oil Pressure (red line) | ||
Line 310: | Line 304: | ||
|- | |- | ||
| colspan="2" align="center" | | | colspan="2" align="center" | | ||
'''NOTES''' | |||
Avoid continuous operation between 2000 and 2000 RPM above 32 IN. HG. manifold pressure. | Avoid continuous operation between 2000 and 2000 RPM above 32 IN. HG. manifold pressure. | ||
Line 344: | Line 338: | ||
|- | |- | ||
| Green Arc (Normal Range) | | Green Arc (Normal Range) | ||
| either 360 & | | either 360 °F to 460 °F | ||
|- | |- | ||
| | | | ||
| or 240 & | | or 240 °F to 460 °F | ||
|- | |- | ||
| Red Line (Maximum) | | Red Line (Maximum) | ||
| 460 & | | 460 °F | ||
|- | |- | ||
! align="left" | Oil Temperature | ! align="left" | Oil Temperature | ||
Line 356: | Line 350: | ||
|- | |- | ||
| Green Arc (Normal Operating Range) | | Green Arc (Normal Operating Range) | ||
| either 75 & | | either 75 °F to 240 °F | ||
|- | |- | ||
| | | | ||
| or 100 & | | or 100 °F to 240 °F | ||
|- | |- | ||
| Red Line (Maximum) | | Red Line (Maximum) | ||
| 240 & | | 240 °F | ||
|- | |- | ||
! align="left" | Oil Pressure | ! align="left" | Oil Pressure | ||
Line 398: | Line 392: | ||
|- | |- | ||
| Red Line | | Red Line | ||
| 1650 & | | 1650 °F | ||
|} | |} | ||
==== Center of Gravity Limits ==== | ==== Center of Gravity Limits ==== | ||
{| width="100%" | {| width="100%" | ||
! width="33%" align="left" | Weight<br>Ponds | ! width="33%" align="left" | Weight<br />Ponds | ||
! width="33%" align="left"| Forward Limit<br>Inches Aft of Datum | ! width="33%" align="left"| Forward Limit<br />Inches Aft of Datum | ||
! width="34%" align="left" | Aft Limit<br>Inches Aft of Datum | ! width="34%" align="left" | Aft Limit<br />Inches Aft of Datum | ||
|- | |- | ||
|3400 | |3400 | ||
Line 415: | Line 409: | ||
|94.6 | |94.6 | ||
|} | |} | ||
'''NOTES''' | |||
Straight line variation between the points given. | Straight line variation between the points given. | ||
Line 445: | Line 439: | ||
The usable fuel in this aircraft is 61.5 gallons in each wing or a total of 123 gallons. | The usable fuel in this aircraft is 61.5 gallons in each wing or a total of 123 gallons. | ||
==== Gyro | ==== Gyro Pressure Limits ==== | ||
The operating limits for the pressure system are 4.5 to 5.2 inches of mercury for all operations as indicated by the gyro pressure gauge. | The operating limits for the pressure system are 4.5 to 5.2 inches of mercury for all operations as indicated by the gyro pressure gauge. | ||
Line 462: | Line 456: | ||
== Development status/Issues/Todo == | == Development status/Issues/Todo == | ||
FDM (JSBSim): | '''FDM (JSBSim):''' | ||
* poor single engine performance | * poor single engine performance | ||
* | * flap operation should not emit a flap motor sound | ||
* | * moving aircraft with parking brake set and full power | ||
'''Avionics:''' | |||
* | * No transponder. | ||
* | ''REMARK:'' There is a GTX330 transponder as an empty 3d model without functionality. | ||
* No GPS. | |||
''REMARK:'' There is a GPS155XL GPS as an empty 3d model without functionality. | |||
'''General:''' | |||
General: | |||
* engine sound in cockpit does not differ from outside engine sound | * engine sound in cockpit does not differ from outside engine sound | ||
* animations of structural icing on wings, stabilizer, fin, etc.missing | * animations of structural icing on wings, stabilizer, fin, etc.missing | ||
== Related content == | == Related content == | ||
* [[Seneca II Checklist]] | * [[Seneca II Checklist]] | ||
* [[Seneca II | * [[Howto:Seneca II]] | ||
* [[Seneca II Panel Reference]] | * [[Seneca II Panel Reference]] | ||
* [[HSI|HSI, Horizontal Situation Indicator]] | |||
* [[Kx165|KX165 COM/NAV Radio]] | |||
{{Piper}} | |||
[[Category:Piper PA34-200T Seneca II]] | |||
[[Category:Aircraft with a cockpit-only autopilot]] | |||
[[ | [[fr:Piper PA34-200T Seneca II]] | ||