FlightGear Git on Mac OS X
|This article is a stub. You can help the wiki by|
|FlightGear Git on:|
Mac OS X
- 1 Please read this, important!
- 2 Default installing locations
- 3 Requirements
- 4 Install
- 4.1 Install Xcode Developer Tools
- 4.2 Install MacPorts
- 4.3 Update MacPorts
- 4.4 Install boost (1.42.0) with MacPorts
- 4.5 Install cmake (2.8.1) with MacPorts
- 4.6 Install plib (1.8.5) with MacPorts
- 4.7 Install the ALUT.framework
- 4.8 Download and install OpenSceneGraph 2.9.7
- 4.9 Git SimGear/FlightGear/fgdata
- 4.10 Install SimGear
- 4.11 Install FlightGear
- 4.12 Finish and Testrun
- 5 Other resources
Please read this, important!
This page is under heavy developement! It shows how you can probably succeed with installing your own FlightGear Developement Version on OSX 10.5or 10.6, on a Intel-based Mac. This page is experimental and this building should not be used unless you know what you do with your computer. Keep in mind that installing developer versions of software can crash your computer ;-) Please do not start to mail to the FlightGear- or SimGear Devel-Mailinglist with FlightGear OSX installing problems related to this Wiki, ask your questions or report errors in the forum in postings/threads related to this page! --> http://www.flightgear.org/forums/viewtopic.php?f=21&t=8134
Default installing locations
This guide installs the software with default paths on your system (MacPorts in /opt/local/ - other parts in /usr and /usr/local). There is only one framework (to be placed manually) in /Library/Frameworks. Use your own configuration options to get your preferred locations!. Do not post linking errors in the forum or the lists when you decide to use your own search paths.
System Requirements: OSX 10.5.8 (Leopard) or higher, and an Intel Mac. (PPC may work using the same instructions) Other requirements: Basic knowledge of using Terminal on OSX, Xcode Dev Tools 3.1.4, MacPorts 1.8.2
You are going to install: Xcode Dev Tools, MacPorts, boost, cmake, plib, ALUT.framework, OpenSceneGraph, git, SimGear and finally FlightGear
This action will take more than 2 hours!
Install Xcode Developer Tools
Download and install Xcode Tools for OSX (for OSX 10.5.8 you need Dev Tools 3.1.4).
Download and install MacPorts 1.8.2
Note: With already installed MacPorts it could be a good idea to first decactivate all other ports for this whole guide. More information: http://guide.macports.org/#installing.macports.upgrade.
In terminal type
sudo port selfupdate sudo port upgrade outdated
When you run into problems with synchronizing go here: http://trac.macports.org/wiki/howto/SyncingWithSVN
Install boost (1.42.0) with MacPorts
sudo port install boost
Note: this step can take more than 30 minutes! Boost is made for drinking more tea.
Install cmake (2.8.1) with MacPorts
sudo port install cmake
Install plib (1.8.5) with MacPorts
sudo port install plib
Install the ALUT.framework
Note: This framework is provided by James T. This is not official! James posted this download link in the develist and the link to the framework can change. Linking to the OpenAL/alut.h header and compilation of official freealut fails on my OSX 10.5.8 with FlightGear, and there is also no port avaiable at the moment. Big thanks to James for providing this framework (universal).
Download here (temporary location!): []
Unzip and move the ALUT.framework folder to /Library/Frameworks
Download and install OpenSceneGraph 2.9.7
Checkout OpenSceneGraph source with
svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/tags/OpenSceneGraph-2.9.7 OpenSceneGraph
cd to the new directory and type
./configure make sudo make install
Remark: OSG-2.9.7 did not compile for X86_64, so I used
svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/trunk OpenSceneGraph
--T3r 21:08, 27 June 2010 (UTC)
Create a directory where you want to place your new FlightGear code.
git clone git://gitorious.org/fg/flightgear.git git clone git://gitorious.org/fg/simgear.git git clone git://mapserver.flightgear.org/fgdata/
The fgdata is about 2 GB! You can clone this repo once and later you use git pull. There is other page FlightGear and Git about using the FlightGear Gitorious GIT Repos. When you run into problem Last but not least there is also another GIT repo for months: http://mapserver.flightgear.org/git/.
Plase note: Gitorious apparently can't handle the initial git clone. Please, clone from mapserver and pull (update) from Gitorious:
git pull git://gitorious.org/fg/fgdata.git
cd to the directory and type
./autogen.sh ./configure make sudo make install
./autogen.sh ./configure make sudo make install
Finish and Testrun
Testrun of FlightGear via terminal, first export FG_ROOT to the fgdata folder
or whereelse your /fgdata is located ;-) But of course you can also use --fg-root=/path/to/fgdata or --fg-scenery=/path/to/scenery with fgfs
fgfs --option1 --option2 ...
Look here directly into OSX and FlightGear related compiling, configuration, terminal output, logs: James’ Hudson Server http://zakalawe.ath.cx:8080/
- GIT Magic