Hi fellow wiki editors!

To help newly registered users get more familiar with the wiki (and maybe older users too) there is now a {{Welcome to the wiki}} template. Have a look at it and feel free to add it to new users discussion pages (and perhaps your own).

I have tried to keep the template short, but meaningful. /Johan G

Difference between revisions of "Building FlightGear - Debian"

From FlightGear wiki
Jump to: navigation, search
(Update mostly completed)
(-Lenny support; +fgrun1.7; +libfltk1.3 and some minor changes)
Line 1: Line 1:
 
{{WIP|Revise due to update to FG 2.10}}
 
{{WIP|Revise due to update to FG 2.10}}
  
HowTo build [[FlightGear]] <u>[[Changelog_2.10.0|2.10.0]]</u> or bleeding edge development version, hereinafter simply called <u>[[GIT]]</u>, on GNU/Linux [http://www.debian.org/ Debian] '''Stable''' 6.x (Squeeze) and '''Testing''' (Wheezy).
+
HowTo build [[FlightGear]] <u>[[Changelog_2.10.0|2.10.0]]</u> or bleeding edge development version, hereinafter simply called <u>[[GIT]]</u>, on GNU/Linux [http://www.debian.org/ Debian] <u>Squeeze</u> and <u>Wheezy</u>.
  
 
The meaning of this article is to be a short, '''checklist''' like, overview of the specific steps to compile FlightGear and components on Debian. For more detailed information please refer to the main article [[Building_FlightGear_-_Linux | Building FlightGear on Linux]].
 
The meaning of this article is to be a short, '''checklist''' like, overview of the specific steps to compile FlightGear and components on Debian. For more detailed information please refer to the main article [[Building_FlightGear_-_Linux | Building FlightGear on Linux]].
Line 17: Line 17:
 
  su -c "apt-get install automake bzip2 cmake fluid g++ gcc git make \
 
  su -c "apt-get install automake bzip2 cmake fluid g++ gcc git make \
 
   subversion tar"
 
   subversion tar"
: cmake: At least version 2.6.0-5 required!
+
: fluid: required for [[FlightGear_Admin_Wizard|fgadmin]] only.
: fluid: needed for [[FlightGear_Admin_Wizard|fgadmin]] only.
+
  
 
; Libs
 
; Libs
 
  su -c "apt-get install libalut-dev libboost1.42-dev libc6-dev \
 
  su -c "apt-get install libalut-dev libboost1.42-dev libc6-dev \
   libcurl4-openssl-dev libfltk1.1-dev libgl1-mesa-dev freeglut3-dev \
+
   libcurl4-openssl-dev libgl1-mesa-dev freeglut3-dev \
 
   libgtkglext1-dev libopenal-dev libpng12-dev librsvg2-dev libsvn-dev \
 
   libgtkglext1-dev libopenal-dev libpng12-dev librsvg2-dev libsvn-dev \
 
   libtiff4-dev libxml2-dev"
 
   libtiff4-dev libxml2-dev"
 
: If you prefer you might replace libcurl4-openssl-dev by libcurl4-gnutls-dev.
 
: If you prefer you might replace libcurl4-openssl-dev by libcurl4-gnutls-dev.
: libfltk1.1-dev: needed for fgadmin only.
 
 
: Add libudev-dev if you need FG's feature <code>-D EVENT_INPUT=ON</code>.
 
: Add libudev-dev if you need FG's feature <code>-D EVENT_INPUT=ON</code>.
: [[File:Zeichen_144_icon.png|21px]]During installation packages simgear-dev and openscenegraph-dev ''must not'' be installed. They can safely be re-installed after compilation.
+
: [[File:Zeichen_144_icon.png|21px]] During installation development packages of libraries that are going to be compiled ''must not'' be installed. They can safely be re-installed after compilation. Namely here these might be libplib-dev, libfltk1.1-dev, libopenscenegraph-dev and simgear-dev.
 
<!--
 
<!--
 
osg: libxml2-dev libcurl4-gnutls-dev/libcurl4-openssl-dev libgtkglext1-dev libopenal-dev libpng12-dev librsvg2-dev libtiff4-dev
 
osg: libxml2-dev libcurl4-gnutls-dev/libcurl4-openssl-dev libgtkglext1-dev libopenal-dev libpng12-dev librsvg2-dev libtiff4-dev
Line 37: Line 35:
  
 
== Build and install ==
 
== Build and install ==
Because we are going to install versions different to the ones in the Debian repositories, it is recommended to install FlightGear in a place independent of the base system, such as <code>/usr/local/FG-2.10.0</code> or <code>$HOME/FG-2.10.0</code>. This way also has the advantage of easily managing several FlightGear versions, even with different versions of OpenSceneGraph and/or plib. I suggest to make this directory writeable by the user so there is no need to become root for the <code>make -j2 install</code> commands. We'll use <code>$prefix</code> as a placeholder for this directory. <br />
+
Because we are going to install versions different to the ones in the Debian repositories, it is recommended to install FlightGear in a place independent of the base system, such as <code>/usr/local/FG-2.10.0</code> or <code>$HOME/FG-2.10.0</code>. This way also has the advantage of easily managing several FlightGear versions, even with different versions of OpenSceneGraph and/or plib, simply by altering the installation prefix. I suggest to make this directory writeable by the user so there is no need to become root for the <code>make -j2 install</code> commands. We'll use <code>$prefix</code> as a placeholder for this directory. <br />
Another placeholder will be <code>$srcdir</code>, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So, in the following instructions, you have to replace these with the local paths or even <code>export</code> them (in every terminal you're using them) during the process:
+
Another placeholder will be <code>$srcdir</code>, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So, in the instructions below, you have to replace these with the local paths or even <code>export</code> them (in every terminal you're using them) for the process:
 
  export prefix=$HOME/FG-2.10.0 && mkdir $prefix
 
  export prefix=$HOME/FG-2.10.0 && mkdir $prefix
 
  export srcdir=$HOME/src && mkdir $srcdir
 
  export srcdir=$HOME/src && mkdir $srcdir
Line 49: Line 47:
  
  
=== libopenal ===
+
=== libfltk ===
<!-- To be removed in summer 2013 -->
+
[http://www.fltk.org/ FLTK] only is required for [[fgadmin]], which is content with libfltk-1.1, and fgrun, which minimum is libfltk-1.3. <br />
<u>Lenny only!</u> The libopenal-dev package in Lenny is too old for [[fgcom]]. For FlightGear it does work but not all features (like doppler) are available, so installing an up to date version is recommended anyway.
+
<u>Wheezy</u>: Just install package libfltk1.3-dev if you're planning to use either of them. <br />
 +
<u>Squeeze</u>: For fgadmin just install package libfltk1.1-dev. To compile fgrun, too, build and install FLTK-1.3 instead:
 
  cd $srcdir
 
  cd $srcdir
  wget http://kcat.strangesoft.net/openal-releases/openal-soft-1.12.854.tar.bz2
+
  wget http://ftp.easysw.com/pub/fltk/1.3.2/fltk-1.3.2-source.tar.gz
  tar xjf openal-soft-1.12.854.tar.bz2
+
  tar xzf fltk-1.3.2-source.tar.gz
  cd openal-soft-1.12.854/build
+
  cd fltk-1.3.2
  cmake  -D CMAKE_INSTALL_PREFIX:PATH="$prefix" ..
+
  ./configure --enable-shared --prefix/$prefix
  make install
+
  make -j2 install
  
  
 
=== [[plib]] ===
 
=== [[plib]] ===
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
Latest SVN is [http://www.mail-archive.com/flightgear-devel@lists.sourceforge.net/msg20793.html required].
 
Latest SVN is [http://www.mail-archive.com/flightgear-devel@lists.sourceforge.net/msg20793.html required].
 
  cd $srcdir
 
  cd $srcdir
Line 73: Line 72:
  
 
=== [[OpenSceneGraph]] ===
 
=== [[OpenSceneGraph]] ===
For <u>2.10.0</u> at least version 3.0.1 is recommended. Users of <u>Wheezy</u> can skip that step and install package openscenegraph-dev instead. <br />
+
For <u>2.10.0</u> on <u>Wheezy</u> skip that step and install package libopenscenegraph-dev instead. <br />
 
<u>GIT</u> users, especially developers, most likely want to use the latest [http://www.openscenegraph.org/projects/osg/wiki/Downloads/DeveloperReleases DeveloperRelease] or even bleeding edge code here. <br />
 
<u>GIT</u> users, especially developers, most likely want to use the latest [http://www.openscenegraph.org/projects/osg/wiki/Downloads/DeveloperReleases DeveloperRelease] or even bleeding edge code here. <br />
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
  cd $srcdir
 
  cd $srcdir
 
  svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/tags/OpenSceneGraph-3.1.1 OpenSceneGraph
 
  svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/tags/OpenSceneGraph-3.1.1 OpenSceneGraph
Line 85: Line 84:
  
 
=== [[SimGear]] ===
 
=== [[SimGear]] ===
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
  cd $srcdir
 
  cd $srcdir
 
  git clone git://mapserver.flightgear.org/simgear
 
  git clone git://mapserver.flightgear.org/simgear
  
<u>2.10.0 only:</u>
+
<u>2.10.0</u> only:
 
  cd simgear
 
  cd simgear
 
  git checkout -b 2.10.0 origin/release/2.10.0
 
  git checkout -b 2.10.0 origin/release/2.10.0
  
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
  mkdir $srcdir/sg-build && cd $srcdir/sg-build
 
  mkdir $srcdir/sg-build && cd $srcdir/sg-build
 
  cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/simgear
 
  cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/simgear
Line 100: Line 99:
  
 
=== FlightGear source ===
 
=== FlightGear source ===
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
  cd $srcdir
 
  cd $srcdir
 
  git clone git://mapserver.flightgear.org/flightgear
 
  git clone git://mapserver.flightgear.org/flightgear
  
<u>2.10.0 only:</u>
+
<u>2.10.0</u> only:
 
  cd flightgear
 
  cd flightgear
 
  git checkout -b 2.10.0 origin/release/2.10.0
 
  git checkout -b 2.10.0 origin/release/2.10.0
  
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
  mkdir $srcdir/fg-build && cd $srcdir/fg-build
 
  mkdir $srcdir/fg-build && cd $srcdir/fg-build
 
  cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/flightgear
 
  cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/flightgear
Line 115: Line 114:
  
 
=== FlightGear data ===
 
=== FlightGear data ===
<u>2.10.0 only:</u> Please have a look at the [http://flightgear.org/mirrors.html mirror list] for a server close to your location.
+
<u>2.10.0</u> only: Please have a look at the [http://www.flightgear.org/download/mirror/ mirror list] for a server close to your location.
 
  cd $prefix
 
  cd $prefix
 
  wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.10.0.tar.bz2
 
  wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.10.0.tar.bz2
 
  tar xjf FlightGear-data-2.10.0.tar.bz2
 
  tar xjf FlightGear-data-2.10.0.tar.bz2
  
<u>GIT only:</u>
+
<u>GIT</u> only:
 
For slow/unstable internet connections it is recommended to download the [[Git#fgdata.bundle|fgdata.bundle]] instead of cloning the data.<br />
 
For slow/unstable internet connections it is recommended to download the [[Git#fgdata.bundle|fgdata.bundle]] instead of cloning the data.<br />
 
  cd $prefix
 
  cd $prefix
Line 168: Line 167:
 
For [[fgcom]] install package
 
For [[fgcom]] install package
 
* libasound2-dev
 
* libasound2-dev
On <u>Lenny</u> unfortunately one dependency has to be compiled, see [[#libopenal|libopenal]].
 
 
  cd $srcdir
 
  cd $srcdir
 
<!--git clone http://mapserver.flightgear.org/git/fgcom -->
 
<!--git clone http://mapserver.flightgear.org/git/fgcom -->
Line 179: Line 177:
  
 
=== fgrun ===
 
=== fgrun ===
To build [[fgrun]] one more package is required:
+
To build [[fgrun]] libfltk1.3-dev is required, see [[#libfltk|libfltk above]]. <br />
* libfltk1.1-dev
+
<u>2.10.0</u> and <u>GIT</u>:
<u>2.10.0 only:</u>
+
 
  cd $srcdir
 
  cd $srcdir
  wget --trust-server-names http://sourceforge.net/projects/fgrun/files/fgrun/1.6.2/fgrun-1.6.2.tar.bz2/download
+
  git clone git://gitorious.org/fg/fgrun.git
tar xf fgrun-1.6.2.tar.bz2
+
mkdir $srcdir/fgrun-build && cd $srcdir/fgrun-build
+
LANG=; cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/fgrun-1.6.2
+
make -j2 install
+
  
<u>GIT only:</u>
+
<u>2.10.0</u> only:
  cd $srcdir
+
  cd fgrun
  git clone http://mapserver.flightgear.org/git/fgrun
+
  git checkout -b 1.7.0 origin/release/1.7.0
 +
 
 +
<u>2.10.0</u> and <u>GIT</u>:
 
  mkdir $srcdir/fgrun-build && cd $srcdir/fgrun-build
 
  mkdir $srcdir/fgrun-build && cd $srcdir/fgrun-build
  LANG=; cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/fgrun
+
  cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/fgrun
 
  make -j2 install
 
  make -j2 install
  
<u>2.10.0 and GIT:</u>
+
<u>2.10.0</u> and <u>GIT</u>:
 
  export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
 
  export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
 
  $prefix/bin/fgrun
 
  $prefix/bin/fgrun

Revision as of 21:16, 24 February 2013

WIP.png Work in progress
This article or section will be worked on in the upcoming hours or days.
Note: Revise due to update to FG 2.10
See history for the latest developments.

HowTo build FlightGear 2.10.0 or bleeding edge development version, hereinafter simply called GIT, on GNU/Linux Debian Squeeze and Wheezy.

The meaning of this article is to be a short, checklist like, overview of the specific steps to compile FlightGear and components on Debian. For more detailed information please refer to the main article Building FlightGear on Linux.

If you don't want to get your hands dirty, have a look at Scripted Compilation on Linux Debian/Ubuntu.

Zeichen 144 icon.png For beginners with compiling it is highly recommended to follow this guide step by step. Any modification to the commands may cause trouble.


Requirements and Preparations

You need more than just an OpenGL capable graphics card including a proper installed driver supporting direct rendering.
Also a bunch of packages (as well as some of their dependencies) are required to compile FlightGear:

Tools
su -c "apt-get install automake bzip2 cmake fluid g++ gcc git make \
  subversion tar"
fluid: required for fgadmin only.
Libs
su -c "apt-get install libalut-dev libboost1.42-dev libc6-dev \
  libcurl4-openssl-dev libgl1-mesa-dev freeglut3-dev \
  libgtkglext1-dev libopenal-dev libpng12-dev librsvg2-dev libsvn-dev \
  libtiff4-dev libxml2-dev"
If you prefer you might replace libcurl4-openssl-dev by libcurl4-gnutls-dev.
Add libudev-dev if you need FG's feature -D EVENT_INPUT=ON.
Zeichen 144 icon.png During installation development packages of libraries that are going to be compiled must not be installed. They can safely be re-installed after compilation. Namely here these might be libplib-dev, libfltk1.1-dev, libopenscenegraph-dev and simgear-dev.


Build and install

Because we are going to install versions different to the ones in the Debian repositories, it is recommended to install FlightGear in a place independent of the base system, such as /usr/local/FG-2.10.0 or $HOME/FG-2.10.0. This way also has the advantage of easily managing several FlightGear versions, even with different versions of OpenSceneGraph and/or plib, simply by altering the installation prefix. I suggest to make this directory writeable by the user so there is no need to become root for the make -j2 install commands. We'll use $prefix as a placeholder for this directory.
Another placeholder will be $srcdir, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So, in the instructions below, you have to replace these with the local paths or even export them (in every terminal you're using them) for the process:

export prefix=$HOME/FG-2.10.0 && mkdir $prefix
export srcdir=$HOME/src && mkdir $srcdir

Have in mind that the data is a relatively large download (GIT about 5 GB and 2.10.0 650 MB). So, to save some time, it is a good idea to fetch it while building the sources.

For some basic info on git commands for FlightGear users we have a git for dummies section.

To have a build with debugging symbols add -D CMAKE_BUILD_TYPE="RelWithDebInfo" to SimGear's and FlightGear's cmake options.


libfltk

FLTK only is required for fgadmin, which is content with libfltk-1.1, and fgrun, which minimum is libfltk-1.3.
Wheezy: Just install package libfltk1.3-dev if you're planning to use either of them.
Squeeze: For fgadmin just install package libfltk1.1-dev. To compile fgrun, too, build and install FLTK-1.3 instead:

cd $srcdir
wget http://ftp.easysw.com/pub/fltk/1.3.2/fltk-1.3.2-source.tar.gz
tar xzf fltk-1.3.2-source.tar.gz
cd fltk-1.3.2
./configure --enable-shared --prefix/$prefix
make -j2 install


plib

2.10.0 and GIT: Latest SVN is required.

cd $srcdir
svn co https://plib.svn.sourceforge.net/svnroot/plib/trunk plib
cd plib
sed s/PLIB_TINY_VERSION\ \ 5/PLIB_TINY_VERSION\ \ 6/ -i src/util/ul.h
./autogen.sh
./configure --prefix=$prefix
make -j2 install


OpenSceneGraph

For 2.10.0 on Wheezy skip that step and install package libopenscenegraph-dev instead.
GIT users, especially developers, most likely want to use the latest DeveloperRelease or even bleeding edge code here.
2.10.0 and GIT:

cd $srcdir
svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/tags/OpenSceneGraph-3.1.1 OpenSceneGraph
mkdir osg-build && cd osg-build
cmake -D CMAKE_BUILD_TYPE="Release" -DLIB_POSTFIX="" \
      -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/OpenSceneGraph
make -j2 install


SimGear

2.10.0 and GIT:

cd $srcdir
git clone git://mapserver.flightgear.org/simgear

2.10.0 only:

cd simgear
git checkout -b 2.10.0 origin/release/2.10.0

2.10.0 and GIT:

mkdir $srcdir/sg-build && cd $srcdir/sg-build
cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/simgear
make -j2 install


FlightGear source

2.10.0 and GIT:

cd $srcdir
git clone git://mapserver.flightgear.org/flightgear

2.10.0 only:

cd flightgear
git checkout -b 2.10.0 origin/release/2.10.0

2.10.0 and GIT:

mkdir $srcdir/fg-build && cd $srcdir/fg-build
cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/flightgear
make -j2 install


FlightGear data

2.10.0 only: Please have a look at the mirror list for a server close to your location.

cd $prefix
wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.10.0.tar.bz2
tar xjf FlightGear-data-2.10.0.tar.bz2

GIT only: For slow/unstable internet connections it is recommended to download the fgdata.bundle instead of cloning the data.

cd $prefix
git clone git://mapserver.flightgear.org/fgdata data


Trial run and finishing process

When all the builds are done and the data download has finished it is time for a test run:

export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
$prefix/bin/fgfs --fg-root=$prefix/data
The fgfs binary needs to find our self compiled libraries at runtime and therefore we have to tell the linker (ld) where to find them. That is what the first line here does. You might want to add this line to your $HOME/.bashrc to have this as a persistent setting (may cause problems, if one has installed more than one version of FlightGear!).
Have in mind, the $prefix and $srcdir variables are available for this session only. For future use of these lines, replace them by the real paths.

To avoid the need to give the path to the fgfs command each time, you might consider to create a symlink at a place that is listed in $PATH:

ln -s $prefix/bin/fgfs $HOME/bin/fgfs

For the future, if you want to start FlightGear from command line have a look at fgfsrc, if you prefer a graphical user interface continue with compiling fgrun.


Optional Software

Zeichen 101 icon.png Some of the below instructions possibly are not up to date. Please feel free to revise them.

Feel free to add the commands to install other FlightGear related projects.

Atlas

One more Package has to be installed:

  • libglew1.5-dev
cd $srcdir
git clone http://mapserver.flightgear.org/git/atlas
cd atlas
./autogen.sh
./configure --prefix=$prefix --with-fgbase=$prefix/data
make -j2 install
cp -R $srcdir/atlas/src/data/* $prefix/data/Atlas
$prefix/bin/Atlas


fgcom

For fgcom install package

  • libasound2-dev
cd $srcdir
svn co https://appfgcom.svn.sourceforge.net/svnroot/fgcom/trunk fgcom
cd fgcom/src
make -j2 install_BIN=$prefix/bin INSTALL_DIR=$prefix/fgcom \
   PLIB_PREFIX=$prefix [OPENAL_PREFIX=$prefix] install

Create an .alsoftrc file as shown in FGCOM Testing.


fgrun

To build fgrun libfltk1.3-dev is required, see libfltk above.
2.10.0 and GIT:

cd $srcdir
git clone git://gitorious.org/fg/fgrun.git

2.10.0 only:

cd fgrun
git checkout -b 1.7.0 origin/release/1.7.0

2.10.0 and GIT:

mkdir $srcdir/fgrun-build && cd $srcdir/fgrun-build
cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/fgrun
make -j2 install

2.10.0 and GIT:

export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
$prefix/bin/fgrun


TaxiDraw

Zeichen 101 icon.png Obsolete for airport creation, use WorldEditor instead. It is still useful for working on ground networks.
To compile TaxiDraw we need to install some more packages:

  • either libcurl4-gnutls-dev or libcurl4-openssl-dev for curl.h
  • wx2.8-headers (at least, maybe even more than just that one. Please report!
su -c "aptitude install [libcurl4-gnutls-dev|libcurl4-openssl-dev]"
cd $srcdir
git clone git://mapserver.flightgear.org/taxidraw
cd taxidraw
./autogen.sh
./configure --prefix=$prefix
make -j2 install


TerraGear

Automatic Installation

If you are familiar with "download_and_compile.sh" script from Brisa you can donwload this script: http://clemaez.fr/flightgear/terragear_download_and_compile.sh This script is similar to Brisa's one (only usable for Debian/Ubuntu/Mint...). This script installs TerraGear (latest version) and terragear-gui.

How to use it?
sh terragear_download_and_compile.sh -j 2 ALL

-j 2 option is for Dual Core, you can tune it as you want. (personnaly I have Quad Core and I use -j 12 but I need to accept to don't use my aircraft during compilation ;) )

Need some help?

Look at forum topics : http://www.flightgear.org/forums/viewtopic.php?f=20&t=14849

After success installation you can exectute this command line in the terragear/bin directory in order to display every --help for each binary files:

cd terragear/bin && for i in `ls`; do echo ""; echo "################# "$i" ##############"; ./$i --help; done

Basic Installation

To resolve some of the dependencies of TerraGear the GIT sections of steps plib, OpenSceneGraph and SimGear have to be done first. Additionally some packages and their dependencies have to be installed:

  • libgdal1-dev, gdal-bin
  • libproj-dev, libogdi3.2-dev (probably even more, please report!)

Wheezy: As of June 2nd there is a bug (#617240) in package libmysqlclient16 which causes compilation to fail. If it is not fixed by the time you're building TerraGear, upgrade to the version from Sid.

cd $srcdir
git clone git://mapserver.flightgear.org/terragear-cs

Two of the dependencies have to be installed manually (See README.gpc and README.newmat for details.):

# gpc install
mkdir $srcdir/gpc232 && cd $srcdir/gpc232
wget ftp://ftp.cs.man.ac.uk/pub/toby/gpc/gpc232-release.zip
unzip gpc232-release.zip
sed s/DBL_EPSILON/0.000001/ -i gpc.h
grep -A 18 '# Unix/Linux makefile' $srcdir/terragear-cs/README.gpc > Makefile
sed "s|/usr/local/lib|$prefix/lib|" -i Makefile
sed "s|/usr/local/include|$prefix/include|" -i Makefile
make -j2 install

# newmat install
mkdir $srcdir/newmat11 && cd $srcdir/newmat11
wget http://www.robertnz.net/ftp/newmat11.tar.gz
tar xzfv newmat11.tar.gz
make -f nm_gnu.mak
cp libnewmat.a $prefix/lib
mkdir $prefix/include/newmat
cp *.h $prefix/include/newmat

Finally TerraGear itself (See README for details.):

cd $srcdir/terragear-cs
./autogen.sh
./configure --prefix=$prefix
sed s/-O2// -i src/Lib/TriangleJRS/Makefile
make -j2 install


WorldEditor (WED)

Because this is the same for all Linux distributions the instructions are not listed here separately. Please refer to our lead WED article.