Hi fellow wiki editors!

To help newly registered users get more familiar with the wiki (and maybe older users too) there is now a {{Welcome to the wiki}} template. Have a look at it and feel free to add it to new users discussion pages (and perhaps your own).

I have tried to keep the template short, but meaningful. /Johan G

Difference between revisions of "Building FlightGear - Debian"

From FlightGear wiki
Jump to: navigation, search
m (minor update/corrections)
(some updates for FG-2.0.0)
Line 17: Line 17:
 
*mawk (or gawk)
 
*mawk (or gawk)
 
*cmake  (min. version 2.6.0-5,  for Etch available on backports.org!)
 
*cmake  (min. version 2.6.0-5,  for Etch available on backports.org!)
*cvs, subversion, (wget)
+
*cvs, subversion, wget
 
<!--*libsvn-dev, for [[Terrasync]]s proper operation.-->
 
<!--*libsvn-dev, for [[Terrasync]]s proper operation.-->
 
*freeglut3-dev, libgl1-mesa-dev, libxrandr-dev
 
*freeglut3-dev, libgl1-mesa-dev, libxrandr-dev
Line 30: Line 30:
 
== Build and install ==
 
== Build and install ==
 
Because we are going to install versions different to the ones in the repositries it is recommended to install FG-2.0.0 and/or CVS in a place independent to the base system such as /usr/local/FG-2.0.0, /opt/FG-2.0.0 or in a subdirectory of your $HOME. I suggest to make it writeable by the user that there is no need to become root for the <code>make install</code> commands. I'll use <code>$prefix</code> as a placeholder for this directory. <BR>
 
Because we are going to install versions different to the ones in the repositries it is recommended to install FG-2.0.0 and/or CVS in a place independent to the base system such as /usr/local/FG-2.0.0, /opt/FG-2.0.0 or in a subdirectory of your $HOME. I suggest to make it writeable by the user that there is no need to become root for the <code>make install</code> commands. I'll use <code>$prefix</code> as a placeholder for this directory. <BR>
Another one will be <code>$srcdir</code>, it stands for the absolute path to the directory which contains the folders of the various source codes. So in the following instructions one have to replace these by the local paths.
+
Another one will be <code>$srcdir</code>, it stands for the absolute path to the directory which contains the folders of the various source codes. So in the following instructions one have to replace these by the local paths or even <code>export</code> them during the process.
  
Subsequent the instructions to fetch the sources and the data needed by FG and the commands to build/install each source.
+
Subsequent the instructions to fetch the sources and the data needed by FlightGear and the commands to build/install each source.
  
Have in mind that the data is relatively huge (CVS about 2 GB and 2.0.0 ... MB) so, to save some time, it is a good idea to fetch it while building the sources.
+
Have in mind that the data is relatively huge (CVS about 2 GB and 2.0.0 300 MB) so, to save some time, it is a good idea to fetch it while building the sources.
  
  
 
=== libopenal ===
 
=== libopenal ===
The libopenal-dev package in Lenny/Etch is too old for fgcom. For FG it does work but not all features (like Doppler) are avaiable, so installing an up to date version is recommended anyway. Get the latest source from http://connect.creativelabs.com/openal/Downloads/Forms/AllItems.aspx (file openal-soft-[version]) and extract it into <code>$srcdir</code>.
+
The libopenal-dev package in Lenny/Etch is too old for [[fgcom]]. For FlightGear it does work but not all features (like Doppler) are avaiable, so installing an up to date version is recommended anyway.
 
  cd $srcdir
 
  cd $srcdir
  wget http://connect.creativelabs.com/openal/Downloads/openal-soft-[version].bz2
+
  wget http://kcat.strangesoft.net/openal-releases/openal-soft-1.11.753.tar.bz2
  tar xjf openal-soft-[version].bz2
+
  tar xjf openal-soft-1.11.753.tar.bz2
  cd openal-soft-[version]/build
+
  cd openal-soft-1.11.753/build
 
  cmake  -D CMAKE_INSTALL_PREFIX:PATH="$prefix" ..
 
  cmake  -D CMAKE_INSTALL_PREFIX:PATH="$prefix" ..
 
  make install
 
  make install
Line 48: Line 48:
  
 
=== plib ===
 
=== plib ===
Version 1.8.5 is needed, packages are available for Testing/Unstable, plib1.8.5-dev. Lenny/Etch users have to compile and install it:
+
Latest SVN is [http://www.mail-archive.com/flightgear-devel@lists.sourceforge.net/msg20793.html recommended], yet package plib1.8.5-dev for Testing/Unstable does work as well.
 
  cd $srcdir
 
  cd $srcdir
  wget http://plib.sourceforge.net/dist/plib-1.8.5.tar.gz
+
  svn co https://plib.svn.sourceforge.net/svnroot/plib/trunk plib
  tar xzf plib-1.8.5.tar.gz
+
  cd plib
  cd plib-1.8.5
+
sed s/PLIB_TINY_VERSION\ \ 5/PLIB_TINY_VERSION\ \ 6/ -i src/util/ul.h
 +
  ./autogen.sh
 
  ./configure --prefix=$prefix
 
  ./configure --prefix=$prefix
 
  make install
 
  make install
Line 82: Line 83:
 
2.0.0:
 
2.0.0:
 
  cd $srcdir
 
  cd $srcdir
  wget ftp://ftp.simgear.org/pub/simgear/Source/SimGear-....tar.gz
+
  wget http://mirrors.ibiblio.org/pub/mirrors/simgear/ftp/Source/SimGear-2.0.0.tar.gz
  tar ...
+
  tar xzf SimGear-2.0.0.tar.gz
  cd ...
+
  cd SimGear-2.0.0
  
 
CVS:
 
CVS:
Line 94: Line 95:
 
  cvs -d :pserver:cvsguest@cvs.simgear.org:/var/cvs/SimGear-0.3 co source
 
  cvs -d :pserver:cvsguest@cvs.simgear.org:/var/cvs/SimGear-0.3 co source
 
  cd source
 
  cd source
 +
./autogen.sh
  
 
2.0.0 and CVS:
 
2.0.0 and CVS:
./autogen.sh
 
 
  ./configure --prefix=$prefix [CPPFLAGS=-I$prefix/include]
 
  ./configure --prefix=$prefix [CPPFLAGS=-I$prefix/include]
 
  make install
 
  make install
Line 104: Line 105:
 
2.0.0:
 
2.0.0:
 
  cd $srcdir
 
  cd $srcdir
  wget http://www.very-clever.com/download/flightgear/Source/...
+
  wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Source/FlightGear-2.0.0.tar.gz
  tar xjf ...
+
  tar xzf FlightGear-2.0.0.tar.gz
  cd ...
+
  cd FlightGear-2.0.0
  
 
CVS:
 
CVS:
Line 116: Line 117:
 
  cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co source
 
  cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co source
 
  cd source
 
  cd source
 +
./autogen.sh
  
 
2.0.0 and CVS:
 
2.0.0 and CVS:
./autogen.sh
 
 
  ./configure --prefix=$prefix [CPPFLAGS=-I$prefix/include/]
 
  ./configure --prefix=$prefix [CPPFLAGS=-I$prefix/include/]
 
  make install
 
  make install
Line 125: Line 126:
 
=== FlightGear data ===
 
=== FlightGear data ===
 
2.0.0:
 
2.0.0:
  cd $prefix/share
+
  cd $prefix
  wget http://www.very-clever.com/download/flightgear/Shared/FlightGear-data-...
+
  wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.0.0.tar.bz2
  tar xjf ...
+
  tar xjf FlightGear-data-2.0.0.tar.bz2
 +
 
 
CVS:
 
CVS:
  cd $prefix/share
+
  cd $prefix
 
  cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co data
 
  cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co data
  
Line 136: Line 138:
 
When all the builds are done and the data download has finished it is time for a test run:
 
When all the builds are done and the data download has finished it is time for a test run:
 
  export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
 
  export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
  $prefix/bin/fgfs --fg-root=$prefix/share/data
+
  $prefix/bin/fgfs --fg-root=$prefix/data
  
 
For the future, if you want to start FlightGear from command line have a look at [[fgfsrc]], if you prefer a graphical user interface continue with [[#fgrun|compiling fgrun]]. Have in mind that fgfs need to find our self compiled libraries and therefore we have to tell the linker (ld) where to find them. That is what the first line here does.
 
For the future, if you want to start FlightGear from command line have a look at [[fgfsrc]], if you prefer a graphical user interface continue with [[#fgrun|compiling fgrun]]. Have in mind that fgfs need to find our self compiled libraries and therefore we have to tell the linker (ld) where to find them. That is what the first line here does.
Line 150: Line 152:
 
  svn co http://fgrun.svn.sourceforge.net/svnroot/fgrun/trunk fgrun
 
  svn co http://fgrun.svn.sourceforge.net/svnroot/fgrun/trunk fgrun
 
  cd fgrun
 
  cd fgrun
 
 
  ./autogen.sh
 
  ./autogen.sh
 
  ./configure --prefix=$prefix  [CPPFLAGS=-I$prefix/include/]
 
  ./configure --prefix=$prefix  [CPPFLAGS=-I$prefix/include/]
Line 157: Line 158:
  
 
=== fgcom ===
 
=== fgcom ===
For [[FGCOM|fgcom]] unfortunately there is one more dependency which cannot be solved with packages on Lenny/Etch, see [[#libopenal|libopenal]].
+
For [[fgcom]] unfortunately there is one more dependency which cannot be solved with packages on Lenny/Etch, see [[#libopenal|libopenal]].
  
 
  cd $srcdir
 
  cd $srcdir
 
  svn co https://appfgcom.svn.sourceforge.net/svnroot/fgcom/trunk fgcom
 
  svn co https://appfgcom.svn.sourceforge.net/svnroot/fgcom/trunk fgcom
 
  cd fgcom/src
 
  cd fgcom/src
 
 
  make INSTALL_BIN=$prefix/bin INSTALL_DIR=$prefix/fgcom \
 
  make INSTALL_BIN=$prefix/bin INSTALL_DIR=$prefix/fgcom \
 
     PLIB_PREFIX=$prefix OPENAL_PREFIX=$prefix install
 
     PLIB_PREFIX=$prefix OPENAL_PREFIX=$prefix install
  
  
== Keeping the CVS version up to date ==
+
<!--== Keeping the CVS version up to date ==
  
 
...to be continued. ;-)
 
...to be continued. ;-)
 
+
-->
  
  

Revision as of 20:07, 28 February 2010

HowTo build on Debian

HowTo build FlightGear 2.0.0 or CVS on GNU/Linux Debian Stable 5.x (Lenny).

This HowTo may also work with Testing/Unstable except that some things are easier because of more up to date packages. So, before fetching something check the version of the available -dev package for it.

It even *should* work with Etch, but I am not certain about some dependencies. Reports are welcome.

If you don't want to make your hands dirty, have a look at Scripted_Compilation_on_Linux_Debian/Ubuntu.


Requirements and Preparations

You need an OpenGL capable graphics including a proper installed driver.

Also a bunch of packages (and some of their dependencies) are required:

  • gcc, g++, make, automake1.9, pkg-config
  • mawk (or gawk)
  • cmake (min. version 2.6.0-5, for Etch available on backports.org!)
  • cvs, subversion, wget
  • freeglut3-dev, libgl1-mesa-dev, libxrandr-dev
  • libxi-dev, libxmu-dev, libxext-dev
  • libopenal-dev (see libopenal), libalut-dev
  • libjpeg62-dev, libtiff4-dev, libpng12-dev
  • libboost1.37-dev (Not available for Lenny atm, see Boost Library below.)

During installation packages simgear-dev and openscenegraph-dev *must not* be installed. They can safely be re-installed after compilation.


Build and install

Because we are going to install versions different to the ones in the repositries it is recommended to install FG-2.0.0 and/or CVS in a place independent to the base system such as /usr/local/FG-2.0.0, /opt/FG-2.0.0 or in a subdirectory of your $HOME. I suggest to make it writeable by the user that there is no need to become root for the make install commands. I'll use $prefix as a placeholder for this directory.
Another one will be $srcdir, it stands for the absolute path to the directory which contains the folders of the various source codes. So in the following instructions one have to replace these by the local paths or even export them during the process.

Subsequent the instructions to fetch the sources and the data needed by FlightGear and the commands to build/install each source.

Have in mind that the data is relatively huge (CVS about 2 GB and 2.0.0 300 MB) so, to save some time, it is a good idea to fetch it while building the sources.


libopenal

The libopenal-dev package in Lenny/Etch is too old for fgcom. For FlightGear it does work but not all features (like Doppler) are avaiable, so installing an up to date version is recommended anyway.

cd $srcdir
wget http://kcat.strangesoft.net/openal-releases/openal-soft-1.11.753.tar.bz2
tar xjf openal-soft-1.11.753.tar.bz2
cd openal-soft-1.11.753/build
cmake  -D CMAKE_INSTALL_PREFIX:PATH="$prefix" ..
make install


plib

Latest SVN is recommended, yet package plib1.8.5-dev for Testing/Unstable does work as well.

cd $srcdir
svn co https://plib.svn.sourceforge.net/svnroot/plib/trunk plib
cd plib
sed s/PLIB_TINY_VERSION\ \ 5/PLIB_TINY_VERSION\ \ 6/ -i src/util/ul.h
./autogen.sh
./configure --prefix=$prefix
make install


Boost Library

Version 1.37 is needed. At least for Lenny/Etch this means getting the sources because this is not available atm on backports.org. Testing/Unstable users may have more luck and a package is available, libboost-1.37-dev or newer.

To build SimGear, FlightGear, fgrun and fgcom some boostlib header files are required, no need to compile and install it. If you have installed a libboost1.37-dev (or highter) package on your system you don't have to bother at all with it. If not, you have to tell each ./configure where the header files are. To do so, add the option CPPFLAGS=-I$prefix/include to the SimGear, FlightGear and fgrun ./configure commands. We copy the header files to $prefix/include because fgcom will need them there.

Get the newest version tar ball from http://sourceforge.net/projects/boost/files/boost/, extract it into $srcdir then:

cp -R $srcdir/boost-[version]/boost/ $prefix/include/


OpenSceneGraph

For FlightGear 2.0.0 one may use the latest (or at least 2.9.6) developer release from http://www.openscenegraph.org/projects/osg/wiki/Downloads/DeveloperReleases and extract it into $srcdir.

Mostly this is ok for FlightGear CVS as well as it is stable. However, sometimes the release is not fresh enough and one have to get the latest developments via SVN:

cd $srcdir
svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/trunk OpenSceneGraph

cmake demands a build directory separate to its source directory. So mkdir one and cd into it.

cmake -D CMAKE_BUILD_TYPE="Release" -D CMAKE_CXX_FLAGS="-O3" -D CMAKE_C_FLAGS="-O3" \
   -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/OpenSceneGraph[-version]
make install


SimGear

2.0.0:

cd $srcdir
wget http://mirrors.ibiblio.org/pub/mirrors/simgear/ftp/Source/SimGear-2.0.0.tar.gz
tar xzf SimGear-2.0.0.tar.gz
cd SimGear-2.0.0

CVS:

cd $srcdir
mkdir simgear
cd simgear
cvs -d :pserver:cvsguest@cvs.simgear.org:/var/cvs/SimGear-0.3 login
#CVS passwd: guest
cvs -d :pserver:cvsguest@cvs.simgear.org:/var/cvs/SimGear-0.3 co source
cd source
./autogen.sh

2.0.0 and CVS:

./configure --prefix=$prefix [CPPFLAGS=-I$prefix/include]
make install


FlightGear source

2.0.0:

cd $srcdir
wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Source/FlightGear-2.0.0.tar.gz
tar xzf FlightGear-2.0.0.tar.gz
cd FlightGear-2.0.0

CVS:

cd $srcdir
mkdir flightgear
cd flightgear
cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 login
#CVS passwd: guest
cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co source
cd source
./autogen.sh

2.0.0 and CVS:

./configure --prefix=$prefix [CPPFLAGS=-I$prefix/include/]
make install


FlightGear data

2.0.0:

cd $prefix
wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.0.0.tar.bz2
tar xjf FlightGear-data-2.0.0.tar.bz2

CVS:

cd $prefix
cvs -d :pserver:cvsguest@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co data


Trial run

When all the builds are done and the data download has finished it is time for a test run:

export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
$prefix/bin/fgfs --fg-root=$prefix/data

For the future, if you want to start FlightGear from command line have a look at fgfsrc, if you prefer a graphical user interface continue with compiling fgrun. Have in mind that fgfs need to find our self compiled libraries and therefore we have to tell the linker (ld) where to find them. That is what the first line here does.


Optional Software

fgrun

To build fgrun one more package is required:

  • libfltk1.1-dev
cd $srcdir
svn co http://fgrun.svn.sourceforge.net/svnroot/fgrun/trunk fgrun
cd fgrun
./autogen.sh
./configure --prefix=$prefix  [CPPFLAGS=-I$prefix/include/]
make install


fgcom

For fgcom unfortunately there is one more dependency which cannot be solved with packages on Lenny/Etch, see libopenal.

cd $srcdir
svn co https://appfgcom.svn.sourceforge.net/svnroot/fgcom/trunk fgcom
cd fgcom/src
make INSTALL_BIN=$prefix/bin INSTALL_DIR=$prefix/fgcom \
   PLIB_PREFIX=$prefix OPENAL_PREFIX=$prefix install