Aircraft testing checklist

From FlightGear wiki
Revision as of 15:59, 25 May 2020 by Zakalawe (talk | contribs) (Created page with "This is a set of basic checks to run on an aircraft, to validate compatibility with a FlightGear version * start on a runway, and start the engine manually * start using the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a set of basic checks to run on an aircraft, to validate compatibility with a FlightGear version

  • start on a runway, and start the engine manually
  • start using the autostart
  • start in-air
  (note different aircraft may not work for in-air start)
  • check throttle (and pitch and mixture) work as expected
  • check brakes response and parking brake
  • tune COM1 and ensure ATIS is audible
    • check volume adjustment if there's a control for it
  • check altimeter setting
  • tune NAV1 and check behaviour
  (might need to be done in air)
  • fly a circuit
  • check flaps / gear work as expected
  • check radar altimeter if fitted
  • fly an approach
  • check ILS reception / deviation
  • check DME readings
  • check fuel consumption / fuel dialog
  • execute a reposition, check nothing breaks
  • execute a reset, check nothing breaks :) (the sim might crash...)

Non-standard stuff

Autopilot checks

  • ?