513
edits
Howto:Fly a circuit pattern: Difference between revisions
Jump to navigation
Jump to search
no edit summary
(will be continued...) |
No edit summary |
||
| Line 2: | Line 2: | ||
A '''circuit pattern''' (also: '''airfield traffic pattern''' or just '''pattern''') is a standardized procedure to regulate the air traffic around an airport, which guarantees a safe and smooth processing of the departing and arriving traffic and also minimises the noise pollution of populated areas around the airport. | A '''circuit pattern''' (also: '''airfield traffic pattern''' or just '''pattern''') is a standardized procedure to regulate the air traffic around an airport, which guarantees a safe and smooth processing of the departing and arriving traffic and also minimises the noise pollution of populated areas around the airport. | ||
This tutorial explains how to fly a pattern in FlightGear using the example of {{wikipedia|Siegerland Airport|Siegerland Airport (EDGS)}}, a medium-sized airport in the middle of Germany and you will fly the [[Cessna 172P]], the default aircraft for FlightGear and a very nice training aircraft. | This tutorial explains how to fly a pattern in [[FlightGear]] using the example of {{wikipedia|Siegerland Airport|Siegerland Airport (EDGS)}}, a medium-sized airport in the middle of Germany and you will fly the [[Cessna 172P]], the default aircraft for FlightGear and a very nice training aircraft. | ||
== Basics of a circuit pattern == | == Basics of a circuit pattern == | ||
[[File:Traffic pattern.jpg|thumb|400px|Diagram of a typical airport traffic pattern]] | |||
=== Sections === | === Sections === | ||
So what do you need to know in order to fly a pattern properly? | So what do you need to know in order to fly a pattern properly? | ||
| Line 18: | Line 19: | ||
=== Headings=== | === Headings=== | ||
Which headings do you have to fly? Departure and final have of course the same heading (runway heading), ca. 130°. Crosswind has 90° less, so you have to fly at 40°. On downwind you have to fly directly the opposite direction to your runway, therefore you | Which headings do you have to fly? Departure and final have of course the same heading (runway heading), ca. 130°. Crosswind has 90° less, so you have to fly at 40°. On downwind you have to fly directly the opposite direction to your runway, therefore you need to fly 310°. And finally, the base has a heading of 220°. | ||
== Startup preparations == | == Startup preparations == | ||
| Line 26: | Line 27: | ||
{{note|For more information about the new Qt5 launcher see it's [[FlightGear Qt launcher|wiki page]]}} | {{note|For more information about the new Qt5 launcher see it's [[FlightGear Qt launcher|wiki page]]}} | ||
* '''"Aircraft"-tab''': Select the ''Cessna 172P Skyhawk (1981 model, detailed)'' | * '''"Aircraft"-tab''': Select the ''Cessna 172P Skyhawk (1981 model, detailed)'' | ||
* '''"Settings"-tab''': Select ''Noon'' in the dropdown menu "Time of day". If you want, choose ''Enable Multi-sample anti-aliasing''. '''Important''': Choose the option ''Enable automatic scenery downloading (TerraSync)''. Uncheck the option ''Fetch real weather online''. If desired, choose ''Start full-screen''. In the text box under ''Additional options'' add the following: | * '''"Settings"-tab''': Select ''Noon'' in the dropdown menu "Time of day". If you want, choose ''Enable Multi-sample anti-aliasing''. '''Important''': Choose the option ''Enable automatic scenery downloading (TerraSync)''. Uncheck the option ''Fetch real weather online''. If desired, choose ''Start full-screen''. In the text box under ''Additional options'' add the following: | ||
--lon=8.077177 | --lon=8.077177 | ||
--lat=50.707672 | --lat=50.707672 | ||
--heading=70 | --heading=70 | ||
* Click '''Run'''! | * Click '''Run'''! | ||
| Line 57: | Line 58: | ||
* Type <syntaxhighlight>fgfs --fg-scenery=PATH\TO\YOUR\SCENERY\FOLDER --terrasync-dir=PATH\TO\YOUR\DOWNLOAD\LOCATION --aircraft=c172p --lon=8.077177 --lat=50.707672 --heading=70 --timeofday=noon --enable-terrasync --disable-real-weather-fetch</syntaxhighlight> '''Important''': The paths to <code>--fg-scenery</code> and <code>terrasync-dir</code> should be identical! If you didn't mess anything up, the default is <code>/home/{USERNAME}/.fgfs/TerraSync</code> | * Type <syntaxhighlight>fgfs --fg-scenery=PATH\TO\YOUR\SCENERY\FOLDER --terrasync-dir=PATH\TO\YOUR\DOWNLOAD\LOCATION --aircraft=c172p --lon=8.077177 --lat=50.707672 --heading=70 --timeofday=noon --enable-terrasync --disable-real-weather-fetch</syntaxhighlight> '''Important''': The paths to <code>--fg-scenery</code> and <code>terrasync-dir</code> should be identical! If you didn't mess anything up, the default is <code>/home/{USERNAME}/.fgfs/TerraSync</code> | ||
* Press {{Key press|Enter}}! | * Press {{Key press|Enter}}! | ||
==== For all operating systems ==== | |||
{{caution|The paths to the scenery and terrasync folders may '''not''' contain spaces!}} | |||
If you want it to look better you can add, [[Command line options#Rendering Options|among others]], the following parameters: | |||
--prop:/sim/rendering/multi-sample-buffers=1 | |||
--prop:/sim/rendering/multi-samples=4 | |||
--enable-clouds3d | |||
--fog-nicest | |||
--texture-filtering=16 | |||
So now, if you did everything correctly you should sit on the Siegerland Airport near the tower. | |||
== Preparing the flight == | |||
For this flight there should be good weather, and in FlightGear you can choose your own weather conditions: In the menu bar go to '''Environment''' -> '''Weather''' (If the menu bar is not visible, hit {{Key press|F10}} once). Then select '''Detailed Weather''', choose '''Fair weather''' from the drop-down menu, and press '''OK'''. | |||
[[File:Weathersetting EDGS.jpg|thumb|left|600px|Setting the weather scenario to "Fair weather"]] | |||
{{-}} | |||
The Fair weather model in FlightGear simulates wind coming from the south-east (150°). Since it is important to take off and land with headwind you have to choose that runway which points in the wind as much as possible. For our situation this is runway 13 with a direction of about 130°. | |||
The next step is setting the [[Avionics and instruments#Altimeter|altimeter]]. The altimeter works with air pressure and as the air pressure changes depending on the weather, you have to adjust it accordingly. By turning the knob on the bottom left of the gauge you set the altimeter to about 1965 ft. | |||
[[File:Altimeter EDGS.jpg|thumb|left|600px|Setting the altimeter]] | |||
{{-}} | |||
Now you can start the engine of the Cessna either by following the checklists under '''Help''' -> '''Aircraft Checklists''' (recommended) or by using Autostart (not recommended). | |||
When the engine is running you have to set the radio to the frequency of Siegerland: 120.37. Then you transmit the message: '''"Siegerland Info, Four-Xray-Charlie-Hotel-Victor, Cessna one seven two, taxiing to holding point one-three!"''' Now you can taxi to the holding point of runway 13. When you have arrived on that point you execute the checlist "Before Takeoff" and after a radio message '''"Siegerland Info, Four-Xray-Charlie-Hotel-Victor entering the runway and taking off!"''', you take a look outside and make sure that no other aircraft is approaching your runway. | |||
[[File:Holdingpoint-13 EDGS.jpg|thumb|left|600px|Waiting on holding point 13]] | |||
{{-}} | |||
Now you can enter the runway and take off! | |||
== Fly the pattern == | |||
Give full throttle and rotate at about 55 KIAS. Accellerate to 70 KIAS and start climbing. Maintain runway heading (130°) for roughly 30 seconds. As long as you are below 85 KIAS, you should retract the flaps. Now make a left turn to 40° to fly the crosswind leg. Switch off the landing light. While flying crosswind you should reach the pattern altitude of 1000 ft AGL, which is 3000 ft on your altimeter. Level off at 3000 ft MSL and accelerate to 100-110 KIAS. You shouldn't fly much faster because then everything will get hectically. | |||
Before you reach a small town in the north-east of EDGS make a left turn to 310° and fly downwind parallel to the runway. When you reach the position abeam the threshold you reduce the speed to 80 KIAS, set the flaps to the first step (10°), and switch the landing light on again. You also start a slow descending to 2500 ft MSL which is about 500 ft AGL. | |||
From now on you fly 40 more seconds straight before you turn into base at 220°. You transmit the message: '''"Siegerland Info, Four-Xray-Charlie-Hotel-Victor turning to base, coming in to land at one-three!"''' Level off at 2500 ft MSL and set the flaps to step 2. Maintain that heading and altitude until you are in the extension of the runway centerline. Then turn into final (130°). | |||
In the final you reduce speed to about 60 KIAS and start descending to the touchdown point. The [[PAPI]] to the left of the runway indicates if you are at the correct altitude: More red lights than white ones mean, you are too low. Two white and to red indicate a good glideslope and if there are more white lights, you are too high. Now you set the flaps to the third and last step. Shortly before touchdown you lift the nose to reduce the sink rate and bring the aircraft back to the ground smoothly. | |||
[[File:Final approach EDGS.jpg|thumb|left|600px|Final approach: PAPI indicates the glideslope.]] | |||
{{-}} | |||
Now you have two options: A final landing or a touch-and-go. | |||
# You did everything perfectly? Well, than apply brakes so that you can exit the runway via a taxiway. Switch on the taxi light and switch off the landing light and the strobes. Taxi to a parking position of your choice and secure the aircraft following the respective checklist. | |||
# Not everything was perfect? Well, so apply full throttle take off again. Tell the tower: '''"Siegerland Info, Four-Xray-Charlie-Hotel-Victor going around!"''' When you have reached a safe altitude and at least 60 KIAS you can retract the flaps step by step and repeat the whole procedure! You can do this over and over again until your tanks are empty. | |||
Have a nice flight! | |||