Jump to: navigation, search

MBB Bo 105

2,488 bytes added, 15:50, 25 November 2017
Reverted edits by Bugman (talk) to last revision by Warty
{{infobox Aircraft|image =Bo105.jpg|name =Bo 105|type =Helicopter|fdm = YASim|status = beta|status-fdm = 5|status-systems = 1|status-cockpit = 2|status-model = 3|authors = HHS (caretaker), Melchior Franz (3d, nasal scripts, configs), Maik Justus (FDM)|fgname =bo105:{{PAGENAME}}/info}}The '''MBB Bo 105''' was is a turbine powered [[helicopter]] introduced into service in the 1970s by Messerschmitt-Bölkow-Blohm also known as PAH-1. Development started in 1961 and its maiden flight was in 1967. It was later produced by Eurocopter. It The model in FGFS has three selectable liveries that can be changed with the Y key, included including a military variant with armament that can be fired.
The fdm is based on various very detailed reports, so the flight handling matches and all needed inputs match exactly the real values. It had been has also been tested sucessfully by at least two real life pilots, so it is currently possibly the most realistic helicopter in FlightGear regarding flight handling. Like the real version, it doesn't have any flight-control assistance. In real life, it is only the military PAH-Version that has a YAW-SAS.
== Aircraft help ==
{| class="prettytablekeytable"
! Key
! Function
| {{key press|,}}
| Fire machine guns/missiles
| {{key press|Tab}}
| Open/Close Bo105 config dialog
| Middle mouse button
| Adjust power lever
| {{key press|]}}
| AutoTrim / ForceTrim
==Usage of AutoTrim/ ForceTrim on FGFS Bo105==
# Move the stick such that the aircraft is in an orientation that you want to trim for (forward flight, hover, ...).
# Press autotrim button {{key press|]}} and keep it pressed.
# Move stick/yoke to neutral position (center).
# Release autotrim button {{key press|]}}.
The Bo105-model has one of the most accurate helicopter-fdm in FGAddon regarding flight handling, based on collected detailed data of the Bo105 from NASA-flight tests, flight manuals, pilots and published scientific data from various sources. Due to its unique flight character, and being a helicopter, there have been some false assumptions about the realism in the past by many users, including its current maintainer.
Though the BO105 was the first helicopter with a rigid rotor head, the civilian version had never been equipped with any flight-control assistance like SAS or autopilot. The only flight-control assistance installed is a force trim system by spring loading. Only the military versions BO105 M-P, especially the armed versions, have YAW-SAS to keep the helicopter better in place while aiming and shooting.
What is confusing to many users, is that they have to pull the stick back quite a lot when lifting off and hovering the helicopter. This 45% back cyclic is completly realistic on the BO105 and these are real values, obtained from two independent sources. Depending on CoG, loads, and flight states the position of the cyclic will vary a lot anyway, so a 0% cyclic at lift-off would make problems on other flight states like fast cruise.
The problem behind this is that the rigging of the controls of real helicopters are mostly not symmetrical like the joysticks we use. So the problem is on the hadware side, since realistic and affordable helicopter sim controls are rare. The force trim system can't be simulated 100% realistically, and would also need corresponding hardware, which does not exist yet.
To help with this, FGFS comes with a generic AutoTrim-function. It can be implemented in every aircraft (See Generic/Nasal/aircraft.nas). The Bo105 makes use of it by pressing | {{key press|]}} while moving the joystick. It has similar effect for joystick-users like a real AutoTrim/ForceTrim-System. Unfortunately it works on the pedals as well, which is unrealistic.
The only thing which makes the BO105 not as realistic as it could be are the known YASim-issues and the unrealistic underpowered flightperfomance, because it should really have twice the climb rate.
== Video Tutorials ==
== In developement 2015/ 2016==
In April 2015 developlement started to replace the current 3d-model of the bo105 with a much more accurate model. The current 3d-model in FGAddon is very lowpoly and not very accurrate of shape and details.
After just 10h work (inluding recherche of additional reference images) work had to be paused due reallife, but will continue now.
== Gallery ==
|Bo105 cockpit.jpg|Sitting inside the Bo105 on the right side of the cockpit.
|FlightGearNL-9.jpg|Bo105 at a heliplatform in the [[FlightGear NL]] scenery.

Navigation menu