18
edits
Mil Mi-6: Difference between revisions
Jump to navigation
Jump to search
→How to use it
mNo edit summary |
|||
| Line 29: | Line 29: | ||
$ fgfs --aircraft=mi6 | $ fgfs --aircraft=mi6 | ||
After FlightGear has successfully loaded everything you should be sitting in the front left seat in the cockpit facing forward to your instruments | After FlightGear has successfully loaded everything you should be sitting in the front left seat in the cockpit facing forward to your instruments. You will probably have noticed that the [[Avionics and Instruments#Attitude Indicator|attitude indicator]] "АГК-47" may not show anything useful. Make clickable objects visible (Ctrl-C) and look at the panel right above you. You should see two switches outlined in yellow. Switch both of them on and you attitude indicator should work now. | ||
You should also see other switches outlined but they don't do anything. | |||
To get the helicopter in the air you now just need to press "}". This will be changed in the future, when the correct startup procedure is implemented. | To get the helicopter in the air you now just need to press "}". This will be changed in the future, when the correct startup procedure is implemented. Make sure that your collective lever is not in the upper position, because that will cause you to loose control, when the rotors are spinning up. | ||
Wait until the rotors have spun up and then | Wait until the rotors have spun up completely and then you can [[Flying the helicopter|lift off like with any other helicopter]] in FlightGear. | ||
'''Notice''': Keep your air-speed low. Otherwise you will loose control of the machine and crash. | '''Notice''': Keep your air-speed low. Otherwise you will loose control of the machine and crash. | ||
If you would like to fly the helicopter from another view, just press "v". It switches the viewpoint to the co-pilot's view, the engineer's view, the radio-operator's view and the navigator's view. The get back to the initial view press "Ctrl + V" and to get to the previous view press "Shift + V". | |||
==The real thing== | ==The real thing== | ||