Boeing 777-200 Tutorial/KSFO-KLAX

From FlightGear wiki
Revision as of 14:56, 8 September 2009 by Vaeronic (talk | contribs)
Jump to navigation Jump to search

Welcome to the Vaerospace Advanced Flightgear tutorial pages

Learn to Fly the 777-200ER like a Pro !

Your first City to City Flight...!

Note: It is necessary to have the scenery for Los Angeles Installed(It does not come with the standard package and ***MUST*** be downloaded. Download Link(105 MB), Extract the Package into your Scenery Folder

We begin with flight planning. The first thing we have to plan is which standard departure route we need to fly and which standard high altitude route we are going to follow(Thats in real life!!!). For now we need to get up and level at 300-320 knots around 15,000-20,000 ft and follow the VOR (and VORTAC) beacons as specified in this tutorial.

[Thanx to Boeing for this modern miracle all you need to know here]

What You need to Know


The FAA instrument manual(8 MB) Very Informative Manual, Must Read for better Understanding!

The Automatic Direction Finder uses a transmitter and aerial on the ground , an NDB (Non Directional Beacon )that allows the ADF instrument to point to the aerial that is tuned at a specified frequency . matter what direction you are travelling in ...the needle (also called the CDI ...Course Deviation Indicator... points to the station . In the RMI (radio Magnetic Indicator ) we can select a plain ADF frequency or the more information rich VOR signal , which is similar but has more points to a selected direction 0-360 to the beacon you which once the needle is pointing at twelve o' clock or straight forward toward your selected VOR ( vor = Vhf {very high frequency) Omnidirectional Range-finder )you can press F12 and enter your current heading plus or minus 180 , in the radial box on the nav 1 line . (RADIALS are the Direction In Degrees directly FROM a VOR Tower 180 degrees opposite from your real Heading ...Towards ...a Tower) The current should read 280 by default change that to the heading you are on when the needle is pointing forward ie 12 bells All of these instruments are combined in the left screen of the 777-200ER

Note headings work in 360 degrees ...0/360 is always north 90 east.. 180 South... and 270 west so adding 180 degrees to your salinas heading which sould be 140 will give a RADIAL of 320 no matter wheather you add or subtract the radio comms dialog enter the heading plus or minus 180 deg. for your RADIAL

Messing with george the Ap (Autopilot)

We are doing this to set the OBS LIne which is set as "heading Bug" in F11 autopilot popup menu F11 and enter your HEADING appox 140 in the heading bug section' to get the purple dotted line to it's correct position Press Ok

[ I strongly Recomend this site ! For learning more on aerial navigation navfltsim is 5 star site You need this... ]

[ It's time to learn how to plan your route with this 5 star Free Airchart Site -USA charts only]

Otherwise just fly as you did and learn as much as possible you should be GROOVY for your landing at KLAX ...RULE ONE AT VAEROSPACE Don't Panik !

Salinas nav1 117.3

Pick a runway at KSFO (San Francisco intnl.) ...such as 28 R .get off the ground and turn on heading of 150 degrees set nav1 to Salinas(117.3) DME about 65 naughts away and steer the 777 toward the needle ( if the needle deviates from the 12'o clockposition you steer toward or into the needle ,it will begin to move back toward 12'0 clock ...doing this frequently is called bird dogging (or bracketing) and should be avoided


Paso Robales 114.3

Oki-doki...set nav 2 (be sure to switch both nav toggle switches on on the panel and set nav 2 to 114.3 ...when you are approx 20 -30 dme away from salinas steer onto the nav 2 needle to 12'o clock ie pointing straight ahead and set nav 1 to our next beacon ...make sure you remember which needle is for nav1 and which is for nav 2 ...nav two is the "skinny one" :)

San Marcus 114.9

This shows the san Marcus and Oxnard VOR sites

Using the same strategy to avoid to much bird dogging ((chasing the needle)

turn onto the nav1 needle 20 DME from paso robales and maintain your chosen flight level not exceed 25 000 ft (you're a beginner /Flight Level 250 )

...once on route to San Marcus immediatly switch nav 2 to Oxnard and use the same procedure

Oxnard 108.7 Coming Down

30 Dme from oxnard bring the aircraft down gently (no more than 150 ft per min) to 8000 ft and level out at 285 not use speedbrakes

Now do a visual check you come into the bay area over the water Klax is close stay 4-5 DME out to sea ..and descend to 2500 ft

Your first all instrument approach to KLAX

This is the Air chart showing The airport

Your first all instrument approach will be to runway 6 R ,which is the first of 4 main runways as seen from left to right in your current approach . ILS (Instrument Landing System ..which is a special type of radio beacon for landing ) or 'Localiser' Now set nav 1 to 111.7(the localiser beacon) set nav 2 to KLAX VOR 113.6 (note you must be under 2500ft for Ils to recieve correctly)

set nav one to the localiser for runway 6 R (right) (that the leftmost runway visable from out at sea maintaining your heading untill the needle is at 10 o' clock (ie pointing left ) now turn the aircraft into the needle so it point forward or upright again... you should be on a heading of approx. 69 degrees magnetic degrees you need to be on this heading as it is the EXACT direction of the runway (069 in the heading bug )... to make sure you can land you should plot a position PAST the oxnard vor...out into the bay area and then at the right moment turn left onto the runway heading of 69 degrees , do this using a chart if you intend trying this in anything other than perfect visual conditions .

... at the bottom of the left flightscreen (primus 1000 efis) there are white markers and another white indicator will appear , if this indicator is in the centre of the marks , there are two sets for heading into runway and the other(verical white ticks on the right of the left screen) for pitch or "glideslope" these scales and thier markers should always be "Dead Center" if they are you are bang on line for your runway... only good planning will make this so . In real life an IFR (Instrument Flight Rules) landing will require two charts (amongst others SIDS , TAC , RUNWAY , SECTIONAL , EN ROUTE , and NOTAMS Notices to Airman) that the pilot must obtain ... the first is for a Standard Arrival Route (STAR chart) and the second for the specific runway approach information called an "Approach Plate" which contains specific information for each runway .

NEVER do an instrument approach with the nose of the 777 pointing down more than 3-5 degrees will crash ! Your decent and heading into any runway must be carefully planned ! The weather ALWAYS PLAYS A CRUCIAL ROLE ....

Head for Runway 6 Right and land as usual...Remember ..runway numbers are reciprocal , 180 degrees , so runways are marked with thier Approximate Headings 10-19(0) 2-20(0) 30-21(0) 40-22(0) and L(eft) or R(ight) if there are two parallel runways. KLAX has 4 long almost parallel runways 6 - 24 L/R and 7-25L/R

I knt in the 777-200ER is 1.1515 Miles per Hour

Now  upgrading and Expanding please revisit ;)
[Go now to Captain Vaeron's main site at googlepages]