MediaWiki has been updated to version 1.35.1. Please report any problems here.

Difference between revisions of "Fokker Dr.I"

From FlightGear wiki
Jump to navigation Jump to search
Line 12: Line 12:
 
|__TOC__
 
|__TOC__
 
|}
 
|}
 
+
[[File:BombableReady.png]]
 
The '''Fokker Dr I''' was a triplane single piston engine airplane.
 
The '''Fokker Dr I''' was a triplane single piston engine airplane.
  

Revision as of 00:56, 17 February 2012

Fokker Dr.I
Fokker DrI.jpg
Type Historical aircraft
Author(s) Michael Selig (FDM), Erik Hofman (3D model)
FDM UIUC
--aircraft= fkdr1-v1-nl-uiuc
Status production

BombableReady.png The Fokker Dr I was a triplane single piston engine airplane.

1600 by 1200 wallpaper (from here)

To Start

Keys

Magneto on: } 
Magnet off: {
Starter: s

To start, press } to turn the magneto on. Engage full throttle. Then press and hold s until the engine catches--it may take several seconds.

To Take Off

Before starting, zoom display out as far as possible using the shift-X key, so that you can see the runway out of both sides of the cockpit.

Start the engine according to the instructions above. As soon as the engine starts, the aircraft will start to roll down the runway. (The DR.1 was not equipped with brakes.)

As soon as the aircraft starts to move, pull back firmly on the stick to counter the aircraft's tendency to nose over.

As the aircraft picks up speed, be prepared to firmly counter the aircraft's tendency to yaw right and roll left. Countering this requires firm left rudder and right aileron, while continuing to apply firm up elevator to counter the tendency to nose over.

As the aircraft starts to lift off, gently ease the stick forward so as to avoid a too-steep rate of climb. If you keep the stick pulled back the aircraft will climb too rapidly and lose airspeed, leading to an invitible stall, roll, and crash.

Similarly, be prepared to ease off the rudder and aileron as the aircraft picks up speed.

Flight

Note that that the DR 1's engine was controlled by a combination of throttle, mixture adjustment, and "blip" switch, which disconnected the magneto and was used to cut engine power for brief periods.

In FG you can use a combination of throttle and "blip" ({ and } keys) to control engine power.

More about DR 1 throttle and engine controls here.

Development Status/Issues/Todo

External links

Related Content