Boeing 777-200: Difference between revisions

Jump to navigation Jump to search

Boeing 777-200 (view source)

Revision as of 14:36, 21 June 2014

383 bytes removed ,  21 June 2014
m
→‎How to autoland
Line 150: Line 150:
==== How to autoland ====
==== How to autoland ====
# Start 777-200ER at any place.
# Start 777-200ER at any place.
# Set flap to 5. You don't need to wait it is set.
# Select menu 'Location' -> 'Position Aricrft in Air'
# Select menu 'Location' -> 'Position Aricrft in Air'
# Select Airport 'KATL' Runway '9L', set Distance 14nm, Altitude 3500ft (AGL 2500ft), Airspeed /instrumentation/weu/state/flap+5knots (~=210) then Press OK.
# Select Airport 'KATL' Runway '9L', set Distance 10nm, Altitude 3500ft (AGL 2500ft), Airspeed /instrumentation/weu/state/flap+5knots (~=190) then Press OK.
# After reposition, shift view to right a bit so that you can see MCP then press 'p' to pause.
# Press 'APP' button. (APP lights come on)
# Set flap to 1.
# Select menu 'Equipment' -> 'Fuel And Payload'
# Chack grossweight not exceed MLW (Maximum Landing Weight) 470,000lbs. Recommend Fuel 10%(Default).
# Select menu 'Equipment' -> 'Radio Settings (F12)'
# Set Nav1 110.50.
# Press 'APP' button. (LOC and APP lights come on)
# Set Autobrake to '2'.
# Set Autobrake to '2'.
# Set Speedbrake (Spoiler) to Auto.
# Set Left VOR switch on to VOR L to see distance from airport.
# Set Left VOR switch on to VOR L to see distance from airport.
# Press 'p' to unpause.
# When capture the GS, set Airspeed to flap 15 placard speed+5 then set Flap to 15.
# Set Airspeed to flap1 placard speed+5 at 12nm.
# When pass the altitude 3000feet (AGL 2000ft) down the Landing Gear and set Airspeed to flap20 placard speed+5 and set Flap to 20.
# When Airspeed is reduced to near it then set flap to 5.
# Set Speedbrake (Spoiler) to Auto ('='key).
# When capture the GS, set Airspeed to flap5 placard speed+5 then set Flap to 15.
# Set Airspeed to vref+5 when current speed is reduced to flap5 placard speed.
# When pass the altitude 3000feet (AGL 2000ft) down the Landing Gear and set Airspeed to flap15 placard speed+5 and set flap to 20.
# Set Airspeed to vref+5 around flap5 placard speed.
# Set flap to 25 around vref+30.
# Set flap to 25 around vref+30.
# Set flap to 30 around vref+20.
# Set flap to 30 around vref+20.
Hyde
15

edits

Retrieved from "https://wiki.flightgear.org/Special:MobileDiff/72999"

Navigation menu