Difference between revisions of "User:Massima"

From FlightGear wiki
Jump to: navigation, search
(Created page with "<big><big><big>'''HATIRE HEADTRACK (a little guide)'''</big></big></big> I write this guide to help anyone to use hathire in any sim/game. Let’s start with hw and sw requir...")
 
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
<big><big><big>'''HATIRE HEADTRACK (a little guide)'''</big></big></big>
+
[[User:Massima/Howto:Hatire_head_tracker]]
 
+
I write this guide to help anyone to use hathire in any sim/game. Let’s start with hw and sw requirements.
+
 
+
<big>'''HARDWARE:'''</big>
+
 
+
1. a MPU9250 device preferring a 5V tolerant device, i did not test a 9255;
+
[[File:Mpu9250.png|thumb|Mpu9250]]
+
2. an arduino board, you can choose any kind but if your MPU works at 3.3V,  you need a board with a 3.3V pin. I use this pro micro board 3.3V and 5V (it runs at 4.68V);
+
[[File:Pro-micro.png|thumb|Pro-micro]]
+
3. a push button;
+
4. i used classic Dupont wires and some Dupont core plus and DuPont plastic shell plug chief.
+
 
+
Obviously this is not the only way to connect it, see http://edtracker.org.uk/ you could use a breadboard or a PCB. I use wires because i can disassemble it if needed.
+

Latest revision as of 11:13, 28 March 2020

User:Massima/Howto:Hatire_head_tracker