Talk:Next newsletter: Difference between revisions

From FlightGear wiki
Jump to navigation Jump to search
(Remove outdated requests, restore intro (the "currently being written" template could be placed on the actual page))
mNo edit summary
Line 30: Line 30:


If you interested in other developing, i.e. not C++ but [[Nasal]] scripting and/or XML, there are some articles listed at [[:Category:Popular Community Requests]] that have been suggested, but not fully or partially implemented, and are "mentored efforts". That means that the community is looking for a hand in implementing them -- help from ''you'' -- but will also have more experienced developers willing to help you, for example by having tailored tutorials or even code snippets written for you. As mentioned in each page, please get in touch if you would like to help with one of those projects. In comparison to C/C++, Nasal is simpler and easier to learn quickly. It also doesn't require recompiling, which means that you can test and develop changes with a standard FlightGear release, i.e. off of the main download page. As long as you can run FlightGear, you can also run Nasal code and contribute. Many tutorials covering a wide range of projects are listed at [[Nasal]], so if you know a programming/scripting language already, or would like to try something new, go ahead: read, write, try and get involved! When it comes to Nasal scripting, playing around with different tutorials and code snippets is more important than being an experienced coder.  
If you interested in other developing, i.e. not C++ but [[Nasal]] scripting and/or XML, there are some articles listed at [[:Category:Popular Community Requests]] that have been suggested, but not fully or partially implemented, and are "mentored efforts". That means that the community is looking for a hand in implementing them -- help from ''you'' -- but will also have more experienced developers willing to help you, for example by having tailored tutorials or even code snippets written for you. As mentioned in each page, please get in touch if you would like to help with one of those projects. In comparison to C/C++, Nasal is simpler and easier to learn quickly. It also doesn't require recompiling, which means that you can test and develop changes with a standard FlightGear release, i.e. off of the main download page. As long as you can run FlightGear, you can also run Nasal code and contribute. Many tutorials covering a wide range of projects are listed at [[Nasal]], so if you know a programming/scripting language already, or would like to try something new, go ahead: read, write, try and get involved! When it comes to Nasal scripting, playing around with different tutorials and code snippets is more important than being an experienced coder.  
FlightGear's built-in [[Nasal]] scripting language comes with a set of standard libraries, and can be extended using FlightGear specific APIs.
Exposing simulator internals to scripting space is a fairly common and useful thing, because it enables base package developers to access these internals without having to build FlightGear from source, so the barrier to entry is significantly lower and we've seen an increasing number of novel features purely implemented in scripting space, due to powerful APIs being available to aircraft developers and other base package developers.
Until FlightGear 2.8, the [[Nasal]] scripting engine only provided a C API to expose such hooks/bindings to scripting space or to expose scripting space data structures back to C/C++.
Unlike the core Nasal engine itself (which is C), FlightGear however is mostly written and being developed in C++. For quite a while, that meant that the Nasal APIs were a bit low-level, and sometimes also awkward to use when making functions, data structures or objects accessible between C++ and Nasal.
Thanks to development on Tom's [[Canvas]] system, there's now a new bindings framework to be found in [[$SG_SRC]]/simgear/nasal/cppbind. This is fully object oriented and supports modern C++ features by operating through classes and methods with full STL support, abstracting most common operations away.
{{CppBind Ideas}}


Of course, you're also free to work on whatever you want -- FlightGear as a community-driven doesn't tell people what to do, but welcomes any contributions from anybody, as long as they have acceptable quality and are free to be licensed under the GNU GPL. So if you have something you would like to contribute back to FlightGear, please get in touch! (Preferably using Gitorious for larger merge requests, and the forums or (core-) developer's mailing list to inform the developers of what you want to contribute back.) Changes contributed 6-8 weeks before a release will usually appear in the next release, so your changes can be spread across the world.
Of course, you're also free to work on whatever you want -- FlightGear as a community-driven doesn't tell people what to do, but welcomes any contributions from anybody, as long as they have acceptable quality and are free to be licensed under the GNU GPL. So if you have something you would like to contribute back to FlightGear, please get in touch! (Preferably using Gitorious for larger merge requests, and the forums or (core-) developer's mailing list to inform the developers of what you want to contribute back.) Changes contributed 6-8 weeks before a release will usually appear in the next release, so your changes can be spread across the world.

Revision as of 19:33, 8 May 2014

The following template description is not displayed when the template is inserted in an article.

This is a template for future newsletters, please feel free to edit/improve!



Magagazine.png
Welcome to the FlightGear Newsletter!
Please help us write the next edition!
Enjoy reading the latest edition!


We would like to emphasize that the monthly newsletter can not live without the contributions of FlightGear users and developers. Everyone with a wiki account (free to register) can edit the newsletter and every contribution is welcome. So if you know about any FlightGear related news or projects such as for example updated scenery or aircraft, please do feel invited to add such news to the newsletter. Core developers are encouraged to add news about their latest work to the newsletter's development section and the changelog of the upcoming release. At the end of each month, it's generally a good idea to get in touch with other contributors to ask them to add news about their contributions to the newsletter.

Development news

Note to all contributors: Please also copy your newsletter additions to the changelog for the upcoming release: Next Changelog.

Random Buildings

Canvas System

Missions & Adventures

Missionb.png


High Level Architecture

Usability Improvements

Getting involved as a programmer

Unfortunately, most of the active FG developers are currently very overstretched in terms of the areas that they have ownership of, which is affecting how much can actually be done. Fundamentally we need more core devs.

If you are interested in contributing as a core developer, please see Howto:Start core development.

If you interested in other developing, i.e. not C++ but Nasal scripting and/or XML, there are some articles listed at Category:Popular Community Requests that have been suggested, but not fully or partially implemented, and are "mentored efforts". That means that the community is looking for a hand in implementing them -- help from you -- but will also have more experienced developers willing to help you, for example by having tailored tutorials or even code snippets written for you. As mentioned in each page, please get in touch if you would like to help with one of those projects. In comparison to C/C++, Nasal is simpler and easier to learn quickly. It also doesn't require recompiling, which means that you can test and develop changes with a standard FlightGear release, i.e. off of the main download page. As long as you can run FlightGear, you can also run Nasal code and contribute. Many tutorials covering a wide range of projects are listed at Nasal, so if you know a programming/scripting language already, or would like to try something new, go ahead: read, write, try and get involved! When it comes to Nasal scripting, playing around with different tutorials and code snippets is more important than being an experienced coder.

FlightGear's built-in Nasal scripting language comes with a set of standard libraries, and can be extended using FlightGear specific APIs.

Exposing simulator internals to scripting space is a fairly common and useful thing, because it enables base package developers to access these internals without having to build FlightGear from source, so the barrier to entry is significantly lower and we've seen an increasing number of novel features purely implemented in scripting space, due to powerful APIs being available to aircraft developers and other base package developers.

Until FlightGear 2.8, the Nasal scripting engine only provided a C API to expose such hooks/bindings to scripting space or to expose scripting space data structures back to C/C++.

Unlike the core Nasal engine itself (which is C), FlightGear however is mostly written and being developed in C++. For quite a while, that meant that the Nasal APIs were a bit low-level, and sometimes also awkward to use when making functions, data structures or objects accessible between C++ and Nasal.

Thanks to development on Tom's Canvas system, there's now a new bindings framework to be found in $SG_SRC/simgear/nasal/cppbind. This is fully object oriented and supports modern C++ features by operating through classes and methods with full STL support, abstracting most common operations away.


FlightGear's built-in Nasal scripting language comes with a set of standard libraries, and can be extended using FlightGear specific APIs.

Exposing simulator internals to scripting space is a fairly common and useful thing, because it enables base package developers to access these internals without having to build FlightGear from source, so the barrier to entry is significantly lower and we've seen an increasing number of novel features purely implemented in scripting space, due to powerful APIs being available to aircraft developers and other base package developers.

Until FlightGear 2.8, the Nasal scripting engine only provided a C API to expose such hooks/bindings to scripting space or to expose scripting space data structures back to C/C++.

Unlike the core Nasal engine itself (which is C), FlightGear however is mostly written and being developed in C++. For quite a while, that meant that the Nasal APIs were a bit low-level, and sometimes also awkward to use when making functions, data structures or objects accessible between C++ and Nasal.

Thanks to development on Tom's Canvas system, there's now a new bindings framework to be found in $SG_SRC/simgear/nasal/cppbind. This is fully object oriented and supports modern C++ features by operating through classes and methods with full STL support, abstracting most common operations away.


After working through the Nasal/CppBind article, some of the more useful things to play with in the beginning, would be exposing additional SG/FG classes to Nasal space, such as for example:

Done

Work in Progress

  • SGPropertyChangeListener Pending Pending (suggested by Zakalawe & TheTom) [1] This is a link to the FlightGear forum.
Cquote1.png This and using maketimer instead of settimer should reduce the number of leaked resources a lot, because you would not be able to accidentally leak listeners/timers anymore.
— Thomas Geymayer (2014-11-22). [Flightgear-devel] RFC: Nasal ghosts and garbage collection.
(powered by Instant-Cquotes)
Cquote2.png

Autopilot/Property Rules

Note  This is a summary of all discussions about exposing the autopilot/property-rule system (there are certain Nasal GC issues, so that we ask people not to implement FDM-coupled Nasal code like autopilots): this would be the best way to decrease the amount of Canvas-related Nasal code, i.e. by using property-rules for animation purposes, as per Torsten's RBAR EFIS [2] This is a link to the FlightGear forum. and TheTom's system-modeling plans.
Cquote1.png The quantity of details and system modeling that goes in to covering all the aircraft of the world is impossibly complex. The idea is to put as much support for common/shared systems in C++ as we can and then make it possible to stitch these systems and details together and configure them with xml in a wide variety of ways to create aircraft. But we can never anticipate every system in use, and we can't anticipate the level of detail or feature set that every aircraft developer might want to implement or experiment with, and even if we could there would be no way to model everything in the world in a single application. Nasal gives a lot of flexibility to cover those unanticipated gaps and it allows aircraft developers to push in new areas ahead of the C++ coverage. Now in many cases, aircraft developers were happy with the nasal implementation and called it good enough. Many aircraft developers have become proficient and comfortable in nasal and prefer doing their work there.
— curt (Dec 16th, 2015). Re: Military simulation (from Su-15 Screenshots).
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png Nasal does have an advantage in that it is easier to tailor to specific requirements. So, providing that the CPU overhead is acceptable, this may be a preferable method for many aircraft.A C++ coded module is fixed in stone, but nasal and xml modules are far easier to modify/overload on a per-aircraft basis.As I am modelling a 1960´s military bomber I have quite a number of (very) aircraft specific requirements which are not met by the current RM/GPS code which is targeted at present day commercial usage.
— Alant (Aug 19th, 2015). Re: Route manager leg modes.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png I would prefer to do this in an XML filter in the generic autopilot helpers - definitely not in Nasal. It can be done in C++ if strictly required but then we need way to disable it for people who want different filtering.
— James Turner (2015-04-03). Re: [Flightgear-devel] Route manager: waypoint smoothing.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png I vote for #3: avoid *any* Nasal in the fast simulation [FDM] loop. Nasal execution is slow and non-deterministic. Running it in the fast simulation loop is the last thing we want.
Cquote2.png
Cquote1.png Concerning your original issue on implementing an autopilot: a much better way to do it is to avoid Nasal for the actual autopilot controller elements (numeric computation). Instead, use XML "autopilot" rules for the filter, gain, damper, integrator elements: Autopilot Configuration Reference

You can then use Nasal for the high level stuff, and enable/disable/switch the individual controller elements (e.g. in order to automatically switch the autopilot mode when capturing the ILS).


Cquote2.png
Cquote1.png This is also how such things are done in the real world: controllers aren't implemented in imperative programming languages these days - especially not in scripting languages. People use model-based design and connect controller elements - using graphical tools like MATLAB/Simulink. Obviously, FG is missing a graphical interface to specify the controller rules - but the idea of specifying through XML is the same and specification is straight forward.
Cquote2.png
Cquote1.png I agree with your main point that xml-configured hard-coded filters are the right way to implement and autopilot, and I also agree that in general low-level multi-purpose workhorse code should be C++ whereas Nasal is more suitable for the numerically cheap high-level specific functions.
— Renk Thorsten (2012-08-30). Re: [Flightgear-devel] Running Nasal at simulation rate.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png it should basically resemble the C++ 3D animation system and be invisible (enough) that it could easily be replaced with more C++ should we need more performance (or just 'cause). Exposing SGExpression to Nasal would be helpful soon but not necessary yet.
— Philosopher (Sat Aug 16).  animations.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png Given that a very simple animation system would mainly need to deal with "events/triggers" (i.e. timers & listeners) and "actions", we might even be able to reuse some of galvedro's sophisticated failure management modules, because those already deal with both concepts via the property tree (sent a heads-up to him for some feedback).
— Hooray (Sat Aug 16). Re: .
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png I'd strongly agree with Thorsten here. It's nothing against Nasal from me - I've not even used it - but creating an autopilot (or any GNC or system model, for that matter) can be done very effectively with discrete objects such as summers, gains, controllers, filters, switches, etc., much as JSBSim has done with the system components. This is a standard approach in industry as Thorsten mentions as exemplified by Mathwork's $imulink product.

Scilab/Scicos is similar in concept. Control system topologies are often diagrammed in a way that can lead to a one-to-one correspondence between a block and a control system object that can be referenced in an XML file, if the control system component library has been defined properly. This, again, is the way that JSBSim has approached the solution. Some benefits to such an approach include (IMHO) better testability, more predictability, and easier interface (someday) with a GUI tool, should one materialize. The downside is that XML can be verbose, but it's a price I've come to accept.


— Jon S. Berndt (2012-08-30). Re: [Flightgear-devel] Running Nasal at simulation rate.
(powered by Instant-Cquotes)
Cquote2.png


Cquote1.png I have recently committed some code to allow runtime loading of property rules and have a Nasal binding for that in mind.
— Torsten (Thu Feb 02). Re: 2 Questions: vacuum & electrical.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png The more I think about it, the more I am leaning towards unifying the different system modeling blocks in the C++ core under a generic interface that is exposed (or linked in some way) to Nasal. Think the PID controller, the different filters, flip-flops, etc. They are not substantially different to the basic bricks I am writing...The basic idea would be to detach those blocks from their specific application (autopilot, for example) and refactor them into an independent library with bindings in Nasal and a similar interface to what I have been showing so far. The end result would be quite simulinkish in flavour. It is already starting to smell a bit to that actually... :D

An architecture like that would eventually enable three possible approaches to system modeling: low level C++, static xml driving C++ underneath and fully scripted Nasal.


— galvedro (Tue Nov 05). Re: A general approach to systems modeling in Nasal.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png Regarding things like the PID controller code, its developer/maintainer (Torsten) was actually planning on making this stuff accessible from Nasal, just to prevent scripters from implementing APs in Nasal (due to garbage collection issues) - so that should be a no-brainer actually, and such work should be appreciated
Cquote2.png
Cquote1.png there's an extremely powerful and flexible autopilot system in FG that is entirely XML configurable: Autopilot

There's also a very powerful route manager. Please note however, that there's currently no support for AI traffic to directly make use of the autopilot system or the route manager, so you need to come up with your own infrastructure in scripting space.


— Hooray (Thu Jan 05). Re: Multiple intelligent flyers.
(powered by Instant-Cquotes)
Cquote2.png


Cquote1.png Note however that scripted AI traffic cannot currently make use of any hard-coded FDMs/AP/RM functionality (JSBSim/YaSim), instead you need to come up with your own "pseudo systems" in scripting space unfortunately.
— Hooray (Tue Jan 03). Re: Multiple intelligent flyers.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png The AI traffic system has its own "route manager" system which is currently not yet compatible with the rest of FG unfortunately. But there are plans in place to fix this eventually: [3] This is a link to the FlightGear forum.
— Hooray (Thu Jan 05). Re: Multiple intelligent flyers.
(powered by Instant-Cquotes)
Cquote2.png


Cquote1.png At the moment, Durk has already implemented his own "custom" AI FDM logic, exactly like David predicted a decade ago
— Hooray (Thu Mar 15). Re: [SUGGESTION] Multi-core FlightGear support.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png You can probably find 50+ postings by long term contributors suggesting that AI traffic with FDM support would be a good idea: An_Integrated_AI_Traffic_System#FDM_driven_AI_Traffic
— Hooray (Thu Mar 15). Re: [SUGGESTION] Multi-core FlightGear support.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png When you then take into account that you will probably not need to run the AI traffic FDM at a rate of 120 hz (the FlightGear default), but much more likely at 1-5 hz (at most), you should be able to multiplex at least 20-30 different aircraft onto one dedicated FDM thread (or process).


Thus, the problem lies in the integration part and not the lack of computing power: AI traffic is already the component that accounts for many reported performance bottlenecks and unfortunately the "solution" has often be to disable AI traffic or at least reduce traffic complexity.
Before these issues are resolved, we are unlikely to see real FDMs being supported to simulate AI traffic, even though that would simplify many things in one go (e.g. any aircraft could be used as an AI aircraft and so AI aircraft could also benefit from other systems such as the autopilot or route manager).


— Hooray (Wed Feb 24). Re: "Sophisticated AI aircraft" ... ?.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png you would need to hack the autopilot code so that autopilot configurations can be loaded and created dynamically. At the moment, the autopilot code makes the fixed assumption that there's only a single "main aircraft", so it doesn't know about more than one aircraft.
— Hooray (Thu Jan 05). Re: Multiple intelligent flyers.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png if you wanted to equip your AI traffic with a working route manager, autopilot or even FDM, you would also need to instantiate these subsystems dynamically
— Hooray (Thu Jan 05). Re: Multiple intelligent flyers.
(powered by Instant-Cquotes)
Cquote2.png

props.nas

Cquote1.png ne thing I thing I want to achieve with this changes is to make the Nasal props API more similar to its C++ counterpart as this makes it easier to use if you are using both the C++ and the Nasal API. Also someday I want to refactor nasal-props.cpp to use cppbind, where I want to export as much methods as possible with exactly the same signature than in C++. Especially if using properties seldom (eg. only for initialiation) the relative versions are probably even faster, as the Nasal overhead is lower. Eg. consider the following Nasal code used to initialize some module: var cfg = props.globals.getNode("/my/config/root", 1); var x = cfg.getDoubleValue("x"); var do_it = cfg.getBoolValue("do_it"); Using getprop on the one hand does not allow getting a property converted to a given type and on the other hand is tedious to use for more than one property, as one has to assemble the according property paths (which is definitely less efficient than using a relative method).
— Thomas Geymayer (Apr 14th, 2013). Re: [Flightgear-devel] Nasal props API relative path support.
(powered by Instant-Cquotes)
Cquote2.png

Candidates

Cquote1.png When we have vector road data at runtime, we can do the following:
  • render it in moving-map displays - either real ones (Garmin G1000 / G430) or the map dialog
  • use it to drive building outline creation as Thomas was suggesting
  • animate traffic on the roads, as point lights at night or even meshes in daytime
    (the important one...)
  • generate tile overlay textures dynamically (and based on view distance) to show the roads on the terrain surface. (And the detail of this texture can include road markings / borders based on distance from the viewer / view angle / etc)

— James Turner (2014-11-21). Re: [Flightgear-devel] Future city terrain strategy.
(powered by Instant-Cquotes)
Cquote2.png
Cquote1.png Specifically, there are some C++ data structures that still need to be exposed to Nasal via cppbind so that we can implement features available in the Map dialog and the hard-coded ND

Canvas_GUI#PUI_Widgets


— Hooray (Tue Jun 24). Phasing out MapWidget post 3.2.
(powered by Instant-Cquotes)
Cquote2.png
Note  Before working on anything related, please do get in touch with other contributors to ensure that this list is still up-to-date.

For more technical Nasal questions (C API, internals etc), you'll probably want to refer to Philosopher, TheTom, Zakalawe or Hooray on the forum - TheTom and Zakalawe can also provide help on using cppbind, having both used it extensively during the last months.


Of course, you're also free to work on whatever you want -- FlightGear as a community-driven doesn't tell people what to do, but welcomes any contributions from anybody, as long as they have acceptable quality and are free to be licensed under the GNU GPL. So if you have something you would like to contribute back to FlightGear, please get in touch! (Preferably using Gitorious for larger merge requests, and the forums or (core-) developer's mailing list to inform the developers of what you want to contribute back.) Changes contributed 6-8 weeks before a release will usually appear in the next release, so your changes can be spread across the world.

Release ChangeLog

This section lists changes committed this month that will be available in the next release, these will be copied to the release changelog shortly before a release (for each month), so that we hopefully get a comprehensive list of new features.

Interview with a contributor (NAME)

In each edition we have an interview with a contributor. Suggestions for possible questions are available on interview questions, you are invited to come up with new questions and interview ideas obviously! Anyone is free to write an interview (with him-/herself or others) for next month's newsletter! If you'd like to help interview a contributor or get interviewed, please do consider adding yourself to the list of interview volunteers! To keep this going and less awkward, we are currently trying to come up with the convention that former interviewees become next month's interviewers.

  • How long have you been involved in FlightGear?
  • What are your major interests in FlightGear?
  • What project are you working on right now?
  • What do you plan on doing in the future?
  • Are you happy with the way the FlightGear project is going?
  • What do you enjoy most about developing for FlightGear?
  • Are there any "hidden features" you have worked on in FlightGear that new users may miss?
  • What advice can you give to new developers who want to get started on their first aircraft/new feature/Nasal script?

More questions are being collected here: Interview questions.

Stay tuned for next month's interview, featuring FlightGear contributor XXXXXXXX

Nasal for newbies

New software tools and projects

FlightGear addons and mods

In the hangar

New aircraft

Updated aircraft

Liveries

Scenery corner

Airports

Aircraft of the month

Airport of the month

Screenshot of the month

Suggested flights

Aircraft reviews

Wiki updates

Translators required

En.gif The FlightGear Wiki still needs help for translating it into various languages. If you are interested in making the FlightGear Wiki multi-language then start at Help:Translate.
De.gif Das FlightGear Wiki benötigt immer noch Hilfe bei der Übersetzung in verschiedene Sprachen. Wenn Du Interesse daran hast, das FlightGear Wiki Mehrsprachig zu machen, dann fang doch mit Help:Übersetzen an.
Nl.gif De FlightGear Wiki kan nog steed hulp gebruiken bij het vertalen van artikelen. Als je interesse hebt om de wiki meertalig te maken, raden we je aan om een kijkje te nemen bij Help:Vertalen.
Es.gif La FlightGear wiki todavía necesita ayuda para traducirla a varios lenguajes. Si estás interesado en hacer la FlightGear wiki multilingüe, entonces comienza en Help:Traducir.

Community news

FlightGear on YouTube

New tutorials and screencasts

Forum news

Multiplayer

Virtual airlines

FlightGear events

Useful links

And finally ...

Contributing

Many people think that contributing to the FlightGear project requires writing C++ code or doing 3D modeling and that it takes lots of time, and therefore feel that they cannot contribute directly. Not so. There's a whole variety of ways to make a valuable and satisfying contribution to FlightGear without being a developer.

The Volunteer page is intended to provide a starting point for those wanting to contribute, but who don't know how. Of course, these are just suggestions. So if you have already a specific idea in mind, please do get in touch with the community to ask for feedback, using the mailing lists, forum This is a link to the FlightGear forum. or the IRC channel (chat).

Remember that work in non-development areas will be appreciated as much as developer contributions (or more!), because generally more visible to the end user.

If you'd like to learn more about getting your own ideas and features into FlightGear, check out Implementing new features for FlightGear.

If you are contributing to the core simulator, or an aircraft in the master repository, you should be part of the FlightGear-devel mailing list, which is the primary point of contact for all discussions regarding the development of the simulator. You may want to check out also Howto: Understand the FlightGear development process and Howto: Starting core development.

Call for volunteers

  • The Terragear maintainers are looking for volunteers to help with development on the next world scenery project. If you've ever wondered how a full 3D model of earth can be generated from raw data, now is your chance. See the plan at World Scenery 3.0 roadmap.

Did you know