Piper J3 Cub: Difference between revisions

From FlightGear wiki
Jump to navigation Jump to search
(22 intermediate revisions by 12 users not shown)
Line 1: Line 1:
{{infobox Aircraft
{{:{{PAGENAME}}/info}}
|image =Piper_j3cub.jpg
The '''Piper J-3 Cub''' is a small, simple, light [[aircraft]] that was built between 1937 and 1947 by [[:Category:Piper|Piper Aircraft]]. With tandem (fore and aft) seating, it was intended for flight training but became one of the most popular and best-known light aircraft of all time. The Cub's simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile.
|name =Piper J3 Cub
|type =Civilian aircraft
|fdm = [[YASim]]
|status =
|authors =David Megginson (3D, FDM), Jim Wilson (Instruments)
}}
The Piper J-3 Cub is a small, simple, light aircraft that was built between 1937 and 1947 by Piper Aircraft. With tandem (fore and aft) seating, it was intended for flight training but became one of the most popular and best-known light aircraft of all time. The Cub's simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile.


The aircraft's standard yellow paint has come to be known as “Cub Yellow” or "Lock Haven Yellow".
The aircraft's standard yellow paint has come to be known as “Cub Yellow” or "Lock Haven Yellow".


==Aircraft help==
== Aircraft help ==
===Controls===
[[File:172P 06.jpg|300px]]
{| class="prettytable"
=== Controls ===
!Key
{| class="keytable"
!Function
! Key
! Function
|-
|-
|d
| {{key press|d}}
|Open/Close Door
| Open/Close door
|-
|-
|s
| {{key press|s}}
|Start engine
| Start engine
|-
|-
|Ctrl-o
| {{key press|Ctrl|o}}
|Start/Stop aerotowing
| Start/Stop aerotowing
|}
|}


===Manual===
=== Manual ===
'''''This section originally contained material which was suspected of not complying to the GPL Licence version 2 and was removed.'''''
This section originally contained material which was suspected of not complying with the GPL and was removed.


The original manual may be found by searching for "how to fly a Piper Cub" on the net. This link should also work - www.paragonair.com/N/70497/FLY_A_CUB.pdf
The original Cub manual may be found by searching for "how to fly a Piper Cub" on the net. This link should also work - http://www.paragonair.com/N/70497/FLY_A_CUB.pdf


===Pilot Check List===
=== Pilot Check List ===
chocks on
==== Pre start ====
# Chocks on
# Check fuel quantity
# Check controls movements


check fuel quantity
==== Start ====
# Switch fuel on
# Check magneto off
# Swing prop
# Switch magneto to both
# Swing prop
# Chocks away
# Check oil pressure
# Check door close
# S-taxi to runway


check controls movements
==== Take off ====
# Check all clear
# Throttle to 1400 rpm
# Check tachometer
# Ease throttle forward
# At 100 feet ease tail up
# Stick to neutral
# Stick back pressure to 10 feet altitude
# Stick neutral again
# Climb
# Fly


switch fuel on
==== Landing ====
# Prepare to land
# Ease throttle back
# Check carb heater
# Glide to runway
# Clear engine with throttle
# At 15 feet back pressure
# At 2 feet stick all way back
# No need to brake
# S-taxi
# Switch magneto off


check magneto off
=== Flying ===


swing prop
FG 2.4 Default aircraft --aicraft=Cub


switch magneto to both
Having been familiar with the Piper cub model in earlier versions of FG, I was pleasantly surprised by the improvement in detail.  Overall the model seemed more accurate and the cockpit was especially pleasing.


swing prop
The aircraft starts with the engine ticking over, so increasing the throttle, rudder has to be used to keep the aircraft straight, but this brings the left wing low, and attempting to correct this immediately lifts the aircraft off in a second. Climb is good, and visibility is very good, enhanced by the view of the high definition model of the tire sticking out as seem from the cockpit.


chocks away
An easy aircraft to fly, the instruments, although as clear as any, take some getting used to, but then we are flying VFR. The RPM reads right to left, and there is an ASI, altimeter but no VSI at all. There are no radios or other electrical encumbrances.


check oil pressure
Landing was particularly easy, slowing down to 50 kt or so, and landing on the grass outside of KSFO which undoubtedly will not be permitted in real life.


check door close
Probably the original LSA, the Cub will  probably never lose its charm, and is well worth checking out.


S-taxi to runway
--[[User:Openflight|Openflight]] ([[User talk:Openflight|talk]]) 00:42, 8 February 2014 (UTC)


check all clear
=== Aerotowing ===
The J3Cub is capable of  [[Howto: Do aerotow over the net|aerotowing over multiplayer]] by the glider pilot pressing {{key press|Ctrl|o}} while behind the Cub.


throttle to 1400 rpm
== Development status/Issues/Todo ==
 
The aircraft was fully remodelled in April 2010 and made available as the Cub. The original low resolution model is still available as the Piper J3 Cub in FGFS version 1.9.1 and older.
check tachometer
 
ease throttle forward
 
at 100 feet ease tail up
 
stick to neutral
 
stick back pressure to 10 feet altitude
 
stick neutral again
 
climb
 
fly
 
prepare to land


ease throttle back
=== Liveries ===
As of 6/2015, a livery system and three new liveries have been added.


check carb heater
=== 3D Cockpit ===
 
* No switches and levers available
glide to runway
 
clear engine with throttle
 
at 15 feet back pressure
 
at 2 feet stick all way back
 
no need to brake
 
S-taxi
 
switch magneto off
 
===Aerotowing===
The J3Cub is capable of [[Howto:_Do_aerotow_over_the_net | Aerotowing]] over multiplayer by the glider pilot pressing Ctrl-o while behind the Cub.
== Development status/Issues/Todo ==
'''Outside:'''
* no pilot present in cockpit -
* aircraft has no shadow
 
'''3D Cockpit:'''
* no rudder control pedals visible
* no switches and levers available
* no elevator trim control available
* Altimeter can't be adjusted with the mouse
* Altimeter can't be adjusted with the mouse
* cockpit is not textured
* While an inclinometer (slip/skid bubble) is optional in a J3 Cub, it's highly recommended, since we can't feel uncoordinated flight through the seats of our pants in FlightGear (it's right under the mag compass in [https://i.pinimg.com/originals/75/2a/a4/752aa4b07f3b6d43ca10e9fb6b703c61.jpg this photo])
* no pilot present in cockpit


'''General:'''
=== General ===
* engine sound in cockpit does not differ from outside engine sound
* Engine sound in cockpit differs only slightly from outside engine sound


'''Non-bugs:'''
=== Non-bugs ===
* pilot door is open and partly in the the wing rods. - This is accurate, and how the J3 can be flown
* Pilot door is open and partly in the the wing rods - this is accurate, and how the J3 can be flown
* does this airplane has flaps? - No
* Does this airplane have flaps? - no
* No electrical system, therefore no cockpit, intrument, or aircraft lights
* No electrical system, therefore no cockpit, instrument, or aircraft lights - but there is an engine start to make it easy
* No HUD.
* No HUD
 
== Related content ==
 
=== Related lists ===
* [[Aircraft]]
* [[Aircraft Todo]]


{{Piper}}
{{Piper}}
[[Category:Aircraft]]
[[Category:Aircraft TODO]]
[[Category:Civilian aircraft]]

Revision as of 21:28, 28 January 2020

Piper J-3 Cub
FGAddon
Piper j3cub.jpg
Piper Cub cockpit in version 2.4
Piper Cub cockpit in version 2.4
Type Civil aircraft, Civil utility aircraft, Military utility aircraft aircraft, Glider tug
Configuration High wing aircraft
Propulsion Propeller aircraft, Single-engine aircraft
Manufacturer Piper
Author(s)
  • David Megginson (3D, FDM)
  • Jim Wilson (Instruments)
  • Don Lavelle (3D remodel, instrument mods, pilot mods, effects, livery)
FDM YASim, JSBSim
--aircraft= Cub (YASim)
J3Cub (JSBSim)
Status advanced production
Development
 Website The website for the Piper J-3 Cub developments.
 Repository The development repository of the Piper J-3 Cub.
Download Download the Piper J-3 Cub aircraft package for the current stable release (2020.3).
License GPLv3+
This aircraft is NOT available under the GNU GPL 2, the primary license of the FlightGear project. This means that parts cannot be reused in the official FlightGear repositories.

The Piper J-3 Cub is a small, simple, light aircraft that was built between 1937 and 1947 by Piper Aircraft. With tandem (fore and aft) seating, it was intended for flight training but became one of the most popular and best-known light aircraft of all time. The Cub's simplicity, affordability and popularity invokes comparisons to the Ford Model T automobile.

The aircraft's standard yellow paint has come to be known as “Cub Yellow” or "Lock Haven Yellow".

Aircraft help

172P 06.jpg

Controls

Key Function
d Open/Close door
s Start engine
Ctrl+o Start/Stop aerotowing

Manual

This section originally contained material which was suspected of not complying with the GPL and was removed.

The original Cub manual may be found by searching for "how to fly a Piper Cub" on the net. This link should also work - http://www.paragonair.com/N/70497/FLY_A_CUB.pdf

Pilot Check List

Pre start

  1. Chocks on
  2. Check fuel quantity
  3. Check controls movements

Start

  1. Switch fuel on
  2. Check magneto off
  3. Swing prop
  4. Switch magneto to both
  5. Swing prop
  6. Chocks away
  7. Check oil pressure
  8. Check door close
  9. S-taxi to runway

Take off

  1. Check all clear
  2. Throttle to 1400 rpm
  3. Check tachometer
  4. Ease throttle forward
  5. At 100 feet ease tail up
  6. Stick to neutral
  7. Stick back pressure to 10 feet altitude
  8. Stick neutral again
  9. Climb
  10. Fly

Landing

  1. Prepare to land
  2. Ease throttle back
  3. Check carb heater
  4. Glide to runway
  5. Clear engine with throttle
  6. At 15 feet back pressure
  7. At 2 feet stick all way back
  8. No need to brake
  9. S-taxi
  10. Switch magneto off

Flying

FG 2.4 Default aircraft --aicraft=Cub

Having been familiar with the Piper cub model in earlier versions of FG, I was pleasantly surprised by the improvement in detail. Overall the model seemed more accurate and the cockpit was especially pleasing.

The aircraft starts with the engine ticking over, so increasing the throttle, rudder has to be used to keep the aircraft straight, but this brings the left wing low, and attempting to correct this immediately lifts the aircraft off in a second. Climb is good, and visibility is very good, enhanced by the view of the high definition model of the tire sticking out as seem from the cockpit.

An easy aircraft to fly, the instruments, although as clear as any, take some getting used to, but then we are flying VFR. The RPM reads right to left, and there is an ASI, altimeter but no VSI at all. There are no radios or other electrical encumbrances.

Landing was particularly easy, slowing down to 50 kt or so, and landing on the grass outside of KSFO which undoubtedly will not be permitted in real life.

Probably the original LSA, the Cub will probably never lose its charm, and is well worth checking out.

--Openflight (talk) 00:42, 8 February 2014 (UTC)

Aerotowing

The J3Cub is capable of aerotowing over multiplayer by the glider pilot pressing Ctrl+o while behind the Cub.

Development status/Issues/Todo

The aircraft was fully remodelled in April 2010 and made available as the Cub. The original low resolution model is still available as the Piper J3 Cub in FGFS version 1.9.1 and older.

Liveries

As of 6/2015, a livery system and three new liveries have been added.

3D Cockpit

  • No switches and levers available
  • Altimeter can't be adjusted with the mouse
  • While an inclinometer (slip/skid bubble) is optional in a J3 Cub, it's highly recommended, since we can't feel uncoordinated flight through the seats of our pants in FlightGear (it's right under the mag compass in this photo)

General

  • Engine sound in cockpit differs only slightly from outside engine sound

Non-bugs

  • Pilot door is open and partly in the the wing rods - this is accurate, and how the J3 can be flown
  • Does this airplane have flaps? - no
  • No electrical system, therefore no cockpit, instrument, or aircraft lights - but there is an engine start to make it easy
  • No HUD