Input device

From FlightGear wiki
Revision as of 08:32, 17 November 2007 by Gijs (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Could you imagine a pilot in his or her Cessna controlling the machine with a keyboard alone? For getting the proper feeling of flight you will need a joystick/yoke plus rudder pedals, right? However, the combination of numerous types of joysticks, flightsticks, yokes, pedals etc. the market with the several target operating systems, makes joystick support a nontrivial task in FlightGear.

FlightGear has integrated joystick support, which automatically detects any joystick, yoke, or pedals attached. Just try it! If this does work for you, lean back and be happy! You can see what FlightGear has detected your joystick as by selecting Help -> Joystick Information from the menu.

Unfortunately, given the several combinations of operating systems supported by FlightGear (possibly in foreign languages) and joysticks available, chances are your joystick does not work out of the box. Basically, there are two alternative approaches to get it going, with the first one being preferred.

Built-in joystick support

General remarks

In order for joystick auto-detection to work, a joystick bindings xml file must exist for each joystick. This file describes what axes and buttons are to be used to control which functions in FlightGear. The associations between functions and axes or buttons are called “bindings”. This bindings file can have any name as long as a corresponding entry exists in the joysticks description file

/FlightGear/joysticks.xml

which tells FlightGear where to look for all the bindings files. We will look at examples later.

FlightGear includes several such bindings files for several joystick manufacturers in folders named for each manufacturer. For example, if you have a CH Products joystick, look in the folder

/FlightGear/Input/Joysticks/CH

for a file that might work for your joystick. If such a file exists and your joystick is working with other applications, then it should work with FlightGear the first time you run it. If such a file does not exist, then we will discuss in a later section how to create such a file by cutting and pasting bindings from the examples that are included with FlightGear.

Verifying your joystick is working

Does your computer see your joystick? One way to answer this question under Linux is to reboot your system and immediately enter on the command line

dmesg | grep Joystick 

which pipes the boot message to grep which then prints every line in the boot message that contains the string “Joystick”. When you do this with a Saitek joystick attached, you will see a line similar to this one:

input0: USB HID v1.00 Joystick [SAITEK CYBORG 3D USB] on usb2:3.0 

This line tells us that a joystick has identified itself as SAITEK CYBORG 3D USB to the operating system. It does not tell us that the joystick driver sees your joystick. If you are working under Windows, the method above does not work, but you can still go on with the next paragraph.

Confirming that the driver recognizes your joystick

FlightGear ships with a utility called js demo. It will report the number of joysticks attached to a system, their respective “names”, and their capabilities. Under Linux, you can run js demo from the folder /FlightGear/bin as follows:

$ cd /usr/local/FlightGear/bin 
$ js demo 

Under Windows, open a command shell (StartAll ProgramsAccessories), go to the FlightGear binary folder and start the program as follows (given FlightGear is installed under c:\Flightgear)

cd \FlightGear\bin 
js demo.exe 

On our system, the first few lines of output are (stop the program with C if it is quickly scrolling past your window!) as follows:

Joystick test program. 
Joystick 0: “CH PRODUCTS CH FLIGHT SIM YOKE USB ” 
Joystick 1: “CH PRODUCTS CH PRO PEDALS USB” 
Joystick 2 not detected 
Joystick 3 not detected 
Joystick 4 not detected 
Joystick 5 not detected 
Joystick 6 not detected 
Joystick 7 not detected 
+——————–JS.0———————-+——————–JS.1———————-+ 
| Btns Ax:0 Ax:1 Ax:2 Ax:3 Ax:4 Ax:5 Ax:6 | Btns Ax:0 Ax:1 Ax:2 | 
+———————————————-+———————————————-+ 
| 0000 +0.0 +0.0 +1.0 -1.0 -1.0 +0.0 +0.0 . | 0000 -1.0 -1.0 -1.0 . . . . . | 


First note that js demo reports which number is assigned to each joystick recognized by the driver. Also, note that the “name” each joystick reports is also included between quotes. We will need the names for each bindings file when we begin writing the binding xml files for each joystick.

Identifying the numbering of axes and buttons

Axis and button numbers can be identified using js demo as follows. By observing the output of js demo while working your joystick axes and buttons you can determine what axis and button numbers are assigned to each joystick axis and button. It should be noted that numbering generally starts with zero.

The buttons are handled internally as a binary number in which bit 0 (the least significant bit) represents button 0, bit 1 represents button 1, etc., but this number is displayed on the screen in hexadecimal notation, so:

  • 0001 ⇒ button 0 pressed
  • 0002 ⇒ button 1 pressed
  • 0004 ⇒ button 2 pressed
  • 0008 ⇒ button 3 pressed
  • 0010 ⇒ button 4 pressed
  • 0020 ⇒ button 5 pressed
  • 0040 ⇒ button 6 pressed
  • ... etcp to ...
  • 8000 ⇒ button 15 pressed
  • ... and ...
  • 0014 ⇒ buttons 2 and 4 pressed simultaneously
  • ... etc.

For Linux users, there is another option for identifying the “name” and the numbers assigned to each axis and button. Most Linux distributions include a very handy program, “jstest”. With a CH Product Yoke plugged into the system, the following output lines are displayed by jstest:

jstest /dev/js3 
Joystick (CH PRODUCTS CH FLIGHT SIM YOKE USB ) has 7 axes and 12 buttons. Driver version is 2.1.0 
Testing…(interrupt to exit) 
Axes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:on 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off 

Note the “name” between parentheses. This is the name the system associates with your joystick.

When you move any control, the numbers change after the axis number corresponding to that moving control and when you depress any button, the “off” after the button number corresponding to the button pressed changes to “on”. In this way, you can quickly write down the axes numbers and button numbers for each function without messing with binary.

Writing or editing joystick binding xml files

At this point, you have confirmed that the operating system and the joystick driver both recognize your joystick(s). You also know of several ways to identify the joystick “name” your joystick reports to the driver and operating system. You will need a written list of what control functions you wish to have assigned to which axis and button and the corresponding numbers.

Make the following table from what you learned from js demo or jstest above (pencil and paper is fine). Here we assume there are 5 axes including 2 axes associated with the hat.

Axis Button
elevator = 0 view cycle = 0
rudder = 1 all brakes = 1
aileron = 2 up trim = 2
throttle = 3 down trim = 3
leftright hat = 4 extend flaps = 4
foreaft hat = 5 retract flaps = 5
decrease RPM = 6
increase RPM = 7

We will assume that our hypothetical joystick supplies the “name” QUICK STICK 3D USB to the system and driver. With all the examples included with FlightGear, the easiest way to get a so far unsupported joystick to be auto detected, is to edit an existing binding xml file. Look at the xml files in the sub-folders of /FlightGear/Input/Joysticks/. After evaluating several of the xml binding files supplied with FlightGear, we decide to edit the file

/FlightGear/Input/Joysticks/Saitek/Cyborg-Gold-3d-USB.xml.

This file has all the axes functions above assigned to axes and all the button functions above assigned to buttons. This makes our editing almost trivial.

Before we begin to edit, we need to choose a name for our bindings xml file, create the folder for the QS joysticks, and copy the original xml file into this directory with this name.

$ cd /usr/local/FlightGear/Input/Joysticks 
$ mkdir QS 
$ cd QS 
$ cp /usr/local/FlightGear/Input/Joysticks/Saitek/ 
Cyborg-Gold-3d-USB.xml QuickStick.xml 

Here, we obviously have supposed a Linux/UNIX system with FlightGear being installed under /usr/local/FlightGear. For a similar procedure under Windows with FlightGear being installed under c:FlightGear, open a command shell and type

c: 
cd /FlightGear/Input/Joysticks 
mkdir QS 
cd QS 
copy /FlightGear/Input/Joysticks/Saitek/ 
Cyborg-Gold-3d-USB.xml QuickStick.xml 

Next, open QuickStick.xml with your favorite editor. Before we forget to change the joystick name, search for the line containing <name>. You should find the line

<name>SAITEK CYBORG 3D USB</name>

and change it to

<name>QUICK STICK 3D USB</name>.

This line illustrates a key feature of xml statements. They begin with a <tag> and end with a </tag>.

You can now compare your table to the comment table at the top of your file copy. Note that the comments tell us that the Saitek elevator was assigned to axis 1. Search for the string

<axis n=~1~>

and change this to

<axis n=~0~>.

Next, note that the Saitek rudder was assigned to axis 2. Search for the string

<axis n=~2~>

and change this to

<axis n=~1~>.

Continue comparing your table with the comment table for the Saitek and changing the axis numbers and button numbers accordingly. Since QUICKSTICK USB and the Saitek have the same number of axes but different number of buttons, you must delete the buttons left over. Just remember to double check that you have a closing tag for each opening tag or you will get an error using the file.

Finally, be good to yourself (and others when you submit your new binding file to a FlightGear developers or users archive!), take the time to change the comment table in the edited file to match your changed axis and button assignments. The new comments should match the table you made from the js demo output. Save your edits.

Several users have reported that the numbers of axes and buttons assigned to functions may be different with the same joystick under Windows and Linux. The above procedure should allow one to easily change a binding xml file created for a different operating system for use by their operating system.

Telling FlightGear about your new bindings xml file

Before FlightGear can use your new xml file, you need to edit the file

/FlightGear/joysticks.xml,

adding a line that will include your new file if the “name” you entered between the name tags matches the name supplied to the driver by your joystick. Add the following line to joysticks.xml.

<js-named include=~Input/Joysticks/QS/QuickStick.xml~/> 

You can tell how FlightGear has interpretted your joystick setup by selecting Help -> Joystick Information from the Menu.

Some hints for Windows users

Basically, the procedures described above should work for Windows as well. If your joystick/yoke/pedals work out of the box or if you get it to work using the methods above, fine. Unfortunately there may be a few problems.

The first one concerns users of non-US Windows versions. As stated above, you can get the name of the joystick from the program js demo. If you have a non-US version of Windows and the joystick .xml files named above do not contain that special name, just add it on top of the appropriate file in the style of

<name>Microsoft-PC-Joysticktreiber </name>

No new entry in the base joysticks.xml file is required.

Unfortunately, there is one more loophole with Windows joystick support. In case you have two USB devices attached (for instance a yoke plus pedals), there may be cases, where the same driver name is reported twice. In this case, you can get at least the yoke to work by assigning it number 0 (out of 0 and 1). For this purpose, rotate the yoke (aileron control) and observe the output of js demo. If figures in the first group of colons (for device 0) change, assignment is correct. If figures in the second group of colons (for device 1) change, you have to make the yoke the preferred device first. For doing so, enter the Windows “Control panel”, open “Game controllers” and select the “Advanced” button. Here you can select the yoke as the “Preferred” device. Afterward you can check that assignment by running js demo again. The yoke should now control the first group of figures.

Unfortunately, we did not find a way to get the pedals to work, too, that way. Thus, in cases like this one (and others) you may want to try an alternative method of assigning joystick controls.

Joystick support via .fgfsrc entries

Fortunately, there is a tool available now, which takes most of the burden from the average user who, maybe, is not that experienced with XML, the language which these files are written in.

For configuring your joystick using this approach, open a command shell (command prompt under windows, to be found under Start|All programs|Accessories). Change to the directory /FlightGear/bin via e.g. (modify to your path)

cd c:\FlightGear\bin

and invoke the tool fgjs via

./fgjs

on a UNIX/Linux machine, or via

fgjs

on a Windows machine. The program will tell you which joysticks, if any, were detected. Now follow the commands given on screen, i.eṁove the axis and press the buttons as required. Be careful, a minor touch already “counts” as a movement. Check the reports on screen. If you feel something went wrong, just re-start the program.

After you are done with all the axis and switches, the directory above will hold a file called fgfsrc.js. If the FlightGear base directory FlightGear does not already contain an options file .fgfsrc (under UNIX)/system.fgfsrc (under Windows) mentioned above, just copy

fgfsrc.js into .fgfsrc (UNIX)/system.fgfsrc (Windows)

and place it into the directory FlightGear base directory FlightGear. In case you already wrote an options file, just open it as well as fgfsrc.js with an editor and copy the entries from fgfsrc.js into .fgfsrc/system.fgfsrc. One hint: The output of fgjs is UNIX formatted. As a result, Windows Editor may not display it the proper way. I suggest getting an editor being able to handle UNIX files as well (and oldie but goldie in this respect is PFE, just make a web search for it). My favorite freeware file editor for that purpose, although somewhat dated, is still PFE, to be obtained from

http://www.lancs.ac.uk/people/cpaap/pfe/.

The the axis/button assignment of fgjs should, at least, get the axis assignments right, its output may need some tweaking. There may be axes moving the opposite way they should, the dead zones may be too small etc. For instance, I had to change

–prop:/input/joysticks/js[1]/axis[1]/binding/factor=-1.0 

into

–prop:/input/joysticks/js[1]/axis[1]/binding/factor=1.0 

(USB CH Flightsim Yoke under Windows XP). Thus, here is a short introduction into the assignments of joystick properties.

Basically, all axes settings are specified via lines having the following structure:

--prop:/input/joysticks/js[n]/axis[m]/binding 
/command=property-scale (one line) 
--prop:/input/joysticks/js[n]/axis[m]/binding 
/property=/controls/steering option (one line) 
--prop:/input/joysticks/js[n]/axis[m]/binding 
/dead-band=db (one line) 
--prop:/input/joysticks/js[n]/axis[m]/binding 
/offset=os (one line) 
--prop:/input/joysticks/js[n]/axis[m]/binding 
/factor=fa (one line) 

where

n number of device (usually starting with 0)
m number of axis (usually starting with 0)
steering option elevator, aileron, rudder, throttle, mixture, pitch
dead-band range, within which signals are discarded; useful to avoid jittering for minor yoke movements
offset specifies, if device not centered in its neutral position
factor controls sensitivity of that axis; defaults to +1, with a value of -1 reversing the behavior

You should be able to at least get your joystick working along these lines. Concerning all the finer points, for instance, getting the joystick buttons working, John Check has written a very useful README being included in the base package to be found under FlightGear/Docs/Readme/Joystick.html. In case of any trouble with your input device, it is highly recommended to have a look into this document.

Resource