Howto:Animate models

From FlightGear wiki
Revision as of 17:35, 9 July 2010 by Gijs (talk | contribs) (→‎Flash: fix)
Jump to navigation Jump to search

The real world is full of motion. To simulate this in FlightGear, models must be animated.

This document provides basic information for all kind of animations. For more complex animations, you are advised to check the available aircraft for examples.

Special code parts

Axis

An axis part is required in every animation that involves a rotating or moving thing.

 <axis>
  <x>0</x>
  <y>1</y>
  <z>0</z>
 </axis>

The axis are similar to the ones of the 3D model. There is a difference between rotation and translation:

  • In rotation animations, the axis part defines around what axis the object rotates. Negative/positive values make the difference between counterclockwise and clockwise rotations.
  • In translate animations, the part defines along what axis the object moves. If the x-axis is poiting backwards, an x-value of -1 will result in forward motion.

You could also define two points, between which FlightGear will calculate the correct axis. This makes the use of a <center> tag redundant! Such coordinates are extremely useful for animating control surfaces (rudder, elevators etc.).

 <axis>   
  <x1-m> 4.9</x1-m>
  <y1-m> 7.1</y1-m>
  <z1-m>-1.0</z1-m>
  <x2-m> 5.9</x2-m>
  <y2-m>11.2</y2-m>
  <z2-m>-0.5</z2-m>
 </axis>

Center

 <center>
  <x-m>-1.50</x-m>
  <y-m> 1   </y-m>
  <z-m> 0.25</z-m>
 </center>

The axis are similar to the ones of the 3D model, so finding coordinates is easily done in 3D modeling software.

Conditions

Multiple animations can make use of a conditional.

  • equals: property value is equal to value/property.
  • greater-than: property value is larger than value/property.
  • greater-than-equals: property value is greater than or equal to value/property.
  • less-than: property value is smaller than value/property.
  • less-than-equals: property value is smaller than or equal to value/property.

The example below is true when n1 has a value greater than 25.

 <condition>
  <greater-than>
   <property>engines/engine[1]/n1</property>
   <value>25</value>
  </greater-than>
 </condition>

Then there are some special tags:

  • and:
  • not:
  • or:

In the example below, the condition is true when either n1 is greater than 25% or equal to 0%.

 <condition>
  <or>
   <greater-than>
    <property>engines/engine[1]/n1</property>
    <value>25</value>
   </greater-than>
   <equals>
    <property>engines/engine[1]/n1</property>
    <value>0</value>
   </equals>
  <or>
 </condition>

An example of implementation into an animation looks as follows:

<animation>
 <object-name>Object</object-name>
 <type>rotate</type>
 <property>suface-positions/left-aileron-pos-norm</property>
 <factor>25</factor>
 <condition>
  <greater-than>
   <property>suface-positions/left-aileron-pos-norm</property>
   <value>10</value>
  </greater-than>
 </condition>
 <center>
  <x-m>-1.50</x-m>
  <y-m> 1   </y-m>
  <z-m> 0.25</z-m>
 </center>
 <axis>
  <x>0</x>
  <y>1</y>
  <z>0</z>
 </axis>
</animation>

Interpolation

For non-fixed factors, an interpolation "table" can be created.

 <interpolation>
  <entry>
   <ind> 0.0</ind>
   <dep> 0.0</dep>
  </entry>
  <entry>
   <ind> 0.667</ind>
   <dep> 0.0</dep>
  </entry>
  <entry>
   <ind> 1.0</ind>
   <dep> 0.5</dep>
  </entry>
 </interpolation>

The lines above represent the following table:

Input Output
0.0 0.0
0.667 0.0
1.0 0.5

You can add as many entries as you need. Interpolation tables are often used for gear animations (eg. to open doors during gear-movements and close them again once the gear is either retracted or fully extended).

Name

With an name animation, you can group multiple objects.

<animation>
 <name>Collection1</name>
 <object-name>Object1</object-name>
 <object-name>Object2</object-name>
 <object-name>Object3</object-name>
</animation>

The example above creates a "virtual object" with the name Collection1. In animation, we can animate this group of objects, by using:

<object-name>Collection1</object-name>

Animation types

Alpha-test

<animation>
 <type>alpha-test</type>
 <object-name>Object</object-name>
 <alpha-factor>0.01</alpha-factor>
</animation>

Billboard

This faces an object towards the viewer. Often used on 2D objects, like clouds, trees and lights.

<animation>
 <type>billboard</type>
 <object-name>Object</object-name>
 <spherical type="bool">true</spherical>
</animation>
  • spherical:

Dist-scale

Used to scale an object, based on the distance to the viewer.

<animation>
 <type>dist-scale</type>
 <object-name>Object</object-name>
 <interpolation>
  <entry>
   <ind>0</ind>
   <dep>1</dep>
  </entry>
  <entry>
   <ind>300</ind>
   <dep>4</dep>
  </entry>
  <entry>
   <ind>1500</ind>
   <dep>8</dep>
  </entry>
 </interpolation>
</animation>

Flash

<animation>
 <type>flash</type>
 <object-name>Object</object-name>
 <offset>0.0</offset>
 <factor>1.0</factor>
 <power>2</power>
 <two-sides type="bool">false</two-sides>
 <min>0.0</min>
 <max>1.0</max>
 <center>
  <x-m>0.0</x-m>
  <y-m>0.0</y-m>
  <z-m>0.0</z-m>
 </center>
 <axis>
  <x>0.0</x>
  <y>-1</y>
  <z>0.1</z>
 </axis>
</animation>
  • offset:
  • factor:
  • power:
  • two-sides:
  • min:
  • max:

Material

An animation type that can be used in various ways.

Changing liveries

Used for the Livery over MP system.

<animation> 
 <type>material</type> 
 <object-name>Object</object-name>
 <property-base>sim/model/livery</property-base> 
 <texture-prop>engine</texture-prop> 
 <texture>KLM.png</texture> 
</animation>

Illumination

1rightarrow.png See Howto: Illuminate faces for the main article about this subject.

<animation>
 <type>material</type>
 <object-name>Object</object-name>
 <emission>
  <red>1.0</red>
  <green>0.2</green>
  <blue>0.0</blue>
  <factor-prop>controls/lighting/panel-norm</factor-prop>
 </emission>
</animation>

Emission colors are multiplied by the factor-prop value. 1 is maximum coclor intensity, while 0 is the minimum. Colors are calculated according to the RGB color model.

Noshadow

<animation>
 <type>noshadow</type>
 <object-name>Object</object-name>
</animation>

Pick

1rightarrow.png See Howto: Make a clickable panel#Pick for the main article about this subject.

Range

To prevent objects -like instruments- being drawn when the aircraft is actually too far away for them to be seen anyway, a range animation is used.

<animation>
 <type>range</type>
 <min-m>0</min-m>
 <max-m>30</max-m>
</animation>
  • min-m: the shortest distance (in meters) from the object center at which it is visible.
  • max-m: the largest distance (in meters) from the object center at which it is visible.

You could also use the generic level of detail (LOD) properties, which can be set by the user through View > Adjust LOD rangers:

  • /sim/rendering/static-lod/bare distance at which only a rough exterior model is required.
  • /sim/rendering/static-lod/rough distance at which most should be visible.
  • /sim/rendering/static-lod/detailed distance at which all details should be visible.

The animation code will look like this:

<animation>
 <type>range</type>
 <min-m>0</min-m>
 <max-property>sim/rendering/static-lod/bare</max-property>
</animation>

You can have both ranges (max and min) bound to a property, or just one of them.

  • min-property:
  • max-property:

Rotate

One of the most important and frequently used animations of all. It rotates an object to an absolute position in degrees, as provided by the property-value.

<animation>
 <object-name>Object</object-name>
 <type>rotate</type>
 <property>suface-positions/left-aileron-pos-norm</property>
 <factor>25</factor>
 <center>
  <x-m>-1.50</x-m>
  <y-m> 1   </y-m>
  <z-m> 0.25</z-m>
 </center>
 <axis>
  <x>0</x>
  <y>1</y>
  <z>0</z>
 </axis>
</animation>
  • factor: is optional.

Scale

A scale animation scales (resizes) an object.

<animation>
 <type>scale</type>
 <object-name>Object</object-name>
 <property>sim/time/sun-angle-rad</property>
 <x-min>1.0</x-min>
 <y-min>1.0</y-min>
 <z-min>1.0</z-min>
 <x-factor>1.4</x-factor>
 <y-factor>1.4</y-factor>
 <z-factor>2.0</z-factor>
</animation>
  • ?-min: the mimimum scale factor for each axis. If the property value would result in a smaller factor than this setting, the scale animation will hold.
  • ?-factor: the scale factor for each axis (factor*property=scale factor).

Select

This animation selects (or unselects) objects when certain conditions are true (or false). The example below shows the object when the n1 of engine[1] is higher than 25%.

<animation>
 <object-name>Object</object-name>
 <type>select</type>
 <condition>
  <greater-than>
   <property>engines/engine[0]/n1</property>
   <value>25</value>
  </greater-than>
 </condition>
</animation>

Shader

<animation>
 <type>shader</type>
 <shader>chrome</shader>
 <texture>chrome2.png</texture>
 <object-name>Object</object-name>
</animation>
  • shader:
  • texture: path to the texture used by the shader.

Spin

Very similar to rotate, but the property provides a value in revolutions per minute (RPM) rather than an absolute position in degrees, and offset cannot be used.

<animation>
 <object-name>Object</object-name>
 <type>spin</type>
 <property>engines/engine[0]/n1</property>
 <factor>25</factor>
 <center>
  <x-m>-1.50</x-m>
  <y-m> 1   </y-m>
  <z-m> 0.25</z-m>
 </center>
 <axis>
  <x>0</x>
  <y>1</y>
  <z>0</z>
 </axis>
</animation>
  • factor: is optional.

Textranslate

A very important animation for cockpits! This animation moves textures over a surface.

<animation>
 <type>textranslate</type>
 <object-name>Object</object-name>
 <property>autopilot/settings/target-speed-kt</property>
 <factor>0.001</factor>
 <step>100</step>
 <axis>
  <x>0</x>
  <y>1</y>
  <z>0</z>
 </axis>
</animation>
  • factor:
  • step:

property * factor * step * texture width/height = the amount of pixels that the texture should be translated. If your texture is 256 pixels, an textranslate of 0.1 will result in the texture moving with 26 pixels, into the direction specified by the axis settings.

Timed

Swtiches between objects at specified intervals. This example switches between a lights-on model and a lights-off model. Lights on are shown 0.2 seconds, while lights off are displayed for 0.8 seconds.

<animation>
 <type>timed</type>
 <object-name>BacklightOn</object-name>
 <object-name>BacklightOff</object-name>
 <use-personality type="bool">true</use-personality>
 <branch-duration-sec>0.8</branch-duration-sec>
 <branch-duration-sec>0.2</branch-duration-sec>
</animation>

Translate

The same as textranslate, but this animation moves a whole object (so including fixed textures). The example below will move an object 5 meters in the y-direction.

<animation>
 <type>translate</type>
 <object-name>Object</object-name>
 <property>controls/seat/pilot/position-norm</property>
 <factor>5</factor>
 <axis>
  <x>0</x>
  <y>1</y>
  <z>0</z>
 </axis>
</animation>