Aeronautical charts: Difference between revisions

From FlightGear wiki
Jump to navigation Jump to search
m (The Danes had changed their url.)
m (+cat)
(31 intermediate revisions by 10 users not shown)
Line 1: Line 1:
http://www.fltplan.com/
Links to websites with real life '''aeronautical charts'''.


[http://www.eurocontrol.int/aim/public/standard_page/web_eur.html Index of online sources for aeronautical information (AIS / AIP etc)]
== The different kinds of aeronautical charts ==
There are many kinds of aeronautical charts. They are often separated into IFR charts, VFR charts and procedure charts.


[http://www.slv.dk/Dokumenter/dscgi/ds.py/View/Collection-94 The Danish Civil Aviation Authority: Aeronautical Information Publication (Denmark, Greenland and the Faeroe Islands)]
=== IFR charts ===
IFR charts or instrument charts are used when flying by instrument/flying [[Flight rules#Instrument flight rules|IFR]], hence the name. They are more or less a geographically correct schematic depiction of the airports, [[Radio beacons|navigation aids]], fixes, the air traffic routes in between them and the airspace classification. In general the IFR charts are in a small scale (in essence the depicted features are small) and for the sake of clarity often doesn't contain more geographical features than borders, oceans and larger lakes.


[http://www.finavia.fi/ais_en The Finnish Civil Aviation Authority: Aeronautical Information Services (AIS)]
The IFR charts are mainly used for route planning when flying IFR, and are often available in two or more series of charts, one with lower routes and one with higher routes. In each country's AIP (section ENR 6, En-route charts) are often small scale IFR charts.


[http://www.sia.aviation-civile.gouv.fr/aip/enligne/METROPOLE/AIP/ARR-DEP/index.htm#TopOfPage France]
=== VFR charts ===
VFR charts are mainly used when flying [[Flight rules#Visual flight rules|VFR]], but can be used when flying IFR as well. In general they are in a larger scale than the IFR charts. In addition to the information of the IFR charts, they also contain information found on a regular topographic map such as representation of the terrain, water features, infrastructure, populated areas etc.


[http://www.lfv.se/templates/LFV_InfoSida_70_30____2557.aspx The Swedish Civil Aviation Authority: Aeronautical Information Publication]
VFR charts are used for VFR and shorter IFR route planning and while flying VFR using [[pilotage and dead reckoning]]. They are available in many different scales and with many different symbologies, often different from country to country.


[https://164.214.2.62/products/digitalaero/terminals.cfm National Geospatial-Intelligence Agency]
=== Procedure charts ===
Procedure charts are used when departing from an airport after take off or approaching an airport before landing. Airstrips and smaller airports only used in VFR conditions rarely have any as the traffic intensity and surrounding areas doesn't demand the use of one.


[http://ead.eurocontrol.int/ European AIS Database’s]
There are three very distinct types of procedure charts:
* '''Approach plates''' which are depicting the area around the airport. They are usually for either visual approach, or several for instrument approach for each runway, each chart using different navigation aids.
* '''STAR'''s (Standard terminal arrival routes), which are describing instrument arrival routes, often several for each runway depending on the direction of arrival.  Usually starting at a named fix along the route to the airport.
* '''SID'''s (Standard instrument departures), which are describing instrument departure routes, often several for each runway depending on the direction of departure.  Usually ending at a named fix along the route from the airport.


[http://aviationtoolbox.org/raw_data/FAA/sectionals/current/ Sectional and Terminal Area Charts for the US (VFR Charts, TIFF, huge Files over slow link]
== Chart resources ==
 
=== Mixed charts ===
* http://www.av8orcharts.com for current full scale NACO charts formatted to print on 8.5"x11" paper.
* http://www.airnav.com for US airports (mainly IAP/SID & STARs)
* [http://ead.eurocontrol.int/ European AIS Database’s]
* http://flightaware.com/
* http://www.fltplan.com/
* [https://164.214.2.62/products/digitalaero/terminals.cfm National Geospatial-Intelligence Agency]
* [http://aviationtoolbox.org/raw_data/FAA/sectionals/current/ aviationtoolbox.org] Sectional and Terminal Area Charts for the US (VFR Charts, TIFF, huge Files over slow link)
* [http://www.vatita.net Italy] (VFR Charts,Airport Charts, etc...)
* [http://www.aisweb.aer.mil.br/aisweb/ Brazilian AIS Portal] [http://www.aisweb.aer.mil.br/index.cfm?i=home&lingua=en (english)] ("Cartas" weblink you find VFR, IFR, SID, STARs and others charts.)
* http://skyvector.com/
 
=== VFR charts ===
* [http://www.lib.utexas.edu/maps/jog/ The Map Collection of Perry-Castañeda Library at Libraries of Texas University] Note that these are not recent.  If planning a longer flight you might want to check for example magnetic variation in advance.
** [http://www.lib.utexas.edu/maps/onc/ Operational Navigation Charts (ONCs)] 1:1,000,000, covering the entire world.
** [http://www.lib.utexas.edu/maps/tpc/ Tactical Pilotage Charts (TPCs)] 1:500,000, covering most of the world.
** [http://www.lib.utexas.edu/maps/jog/ Joint Operation Graphics - Air (JOG-AIRs)] 1:250,000, covering portions of the world.
 
== AIP ==
{{main article|Aeronautical information publication}}
Aeronautical information publication (AIP) is defined by the International Civil Aviation Organization (ICAO) as a publication issued by or with the authority of a state and containing aeronautical information of a lasting character essential to air navigation. AIPs normally have three parts: General (GEN), En route (ENR) and Aerodromes (AD).
 
The AIP contains many charts. Most of these are in the AD section where details and charts of all public aerodromes are published, sometimes charts with the air routes can be found in ENR.
 
== A note on using old charts ==
While you can use old charts for navigation, in particular VFR navigation, there is in particular two things to take into account:
* Radio frequencies and names of fixes might have changed
* The magnetic north pole is not fixed, which will cause some problems:
** The magnetic variation shown on the chart is probably incorrect
** In rare cases runway numbers are changed as they are based on the magnetic heading
 
The current magnetic variation is calculated in FlightGear and can be found in the [[Property tree|property]] <code>/environment/magnetic-variation-deg</code>.  One way to get those for the legs of your flight plan is to take the UFO and look the property up in using the [[property browser]] in the middle of each leg.  On a shorter route it may be sufficient to only take the magnetic variation in the middle of the route.
 
[[Category:Aviation]]
[[Category:Resources]]

Revision as of 18:59, 4 March 2016

Links to websites with real life aeronautical charts.

The different kinds of aeronautical charts

There are many kinds of aeronautical charts. They are often separated into IFR charts, VFR charts and procedure charts.

IFR charts

IFR charts or instrument charts are used when flying by instrument/flying IFR, hence the name. They are more or less a geographically correct schematic depiction of the airports, navigation aids, fixes, the air traffic routes in between them and the airspace classification. In general the IFR charts are in a small scale (in essence the depicted features are small) and for the sake of clarity often doesn't contain more geographical features than borders, oceans and larger lakes.

The IFR charts are mainly used for route planning when flying IFR, and are often available in two or more series of charts, one with lower routes and one with higher routes. In each country's AIP (section ENR 6, En-route charts) are often small scale IFR charts.

VFR charts

VFR charts are mainly used when flying VFR, but can be used when flying IFR as well. In general they are in a larger scale than the IFR charts. In addition to the information of the IFR charts, they also contain information found on a regular topographic map such as representation of the terrain, water features, infrastructure, populated areas etc.

VFR charts are used for VFR and shorter IFR route planning and while flying VFR using pilotage and dead reckoning. They are available in many different scales and with many different symbologies, often different from country to country.

Procedure charts

Procedure charts are used when departing from an airport after take off or approaching an airport before landing. Airstrips and smaller airports only used in VFR conditions rarely have any as the traffic intensity and surrounding areas doesn't demand the use of one.

There are three very distinct types of procedure charts:

  • Approach plates which are depicting the area around the airport. They are usually for either visual approach, or several for instrument approach for each runway, each chart using different navigation aids.
  • STARs (Standard terminal arrival routes), which are describing instrument arrival routes, often several for each runway depending on the direction of arrival. Usually starting at a named fix along the route to the airport.
  • SIDs (Standard instrument departures), which are describing instrument departure routes, often several for each runway depending on the direction of departure. Usually ending at a named fix along the route from the airport.

Chart resources

Mixed charts

VFR charts

AIP

1rightarrow.png See Aeronautical information publication for the main article about this subject.

Aeronautical information publication (AIP) is defined by the International Civil Aviation Organization (ICAO) as a publication issued by or with the authority of a state and containing aeronautical information of a lasting character essential to air navigation. AIPs normally have three parts: General (GEN), En route (ENR) and Aerodromes (AD).

The AIP contains many charts. Most of these are in the AD section where details and charts of all public aerodromes are published, sometimes charts with the air routes can be found in ENR.

A note on using old charts

While you can use old charts for navigation, in particular VFR navigation, there is in particular two things to take into account:

  • Radio frequencies and names of fixes might have changed
  • The magnetic north pole is not fixed, which will cause some problems:
    • The magnetic variation shown on the chart is probably incorrect
    • In rare cases runway numbers are changed as they are based on the magnetic heading

The current magnetic variation is calculated in FlightGear and can be found in the property /environment/magnetic-variation-deg. One way to get those for the legs of your flight plan is to take the UFO and look the property up in using the property browser in the middle of each leg. On a shorter route it may be sufficient to only take the magnetic variation in the middle of the route.