Aeronautical charts: Difference between revisions

From FlightGear wiki
Jump to navigation Jump to search
m (cat: Aviation)
(→‎VFR charts: + Note about age and magnetic variation)
Line 37: Line 37:


=== VFR charts ===
=== VFR charts ===
* [http://www.lib.utexas.edu/maps/jog/ The Map Collection of Perry-Castañeda Library at Libraries of Texas University]  
* [http://www.lib.utexas.edu/maps/jog/ The Map Collection of Perry-Castañeda Library at Libraries of Texas University] Note that these are not recent.  If planning a longer flight you might want to check for example magnetic variation in advance.
** [http://www.lib.utexas.edu/maps/onc/ Operational Navigation Charts (ONCs)] 1:1,000,000, covering the entire world.
** [http://www.lib.utexas.edu/maps/onc/ Operational Navigation Charts (ONCs)] 1:1,000,000, covering the entire world.
** [http://www.lib.utexas.edu/maps/tpc/ Tactical Pilotage Charts (TPCs)] 1:500,000, covering most of the world.
** [http://www.lib.utexas.edu/maps/tpc/ Tactical Pilotage Charts (TPCs)] 1:500,000, covering most of the world.

Revision as of 16:43, 6 May 2014

Links to websites with real life aeronautical charts.

The different kinds of aeronautical charts

There are many kinds of aeronautical charts. They are often separated into IFR charts, VFR charts and procedure charts.

IFR charts

IFR charts or instrument charts are used when flying by instrument/flying IFR, hence the name. They are more or less a geographically correct schematic depiction of the airports, navigation aids, fixes, the air traffic routes in between them and the airspace classification. In general the IFR charts are in a small scale (in essence the depicted features are small) and for the sake of clarity often doesn't contain more geographical features than borders, oceans and larger lakes.

The IFR charts are mainly used for route planning when flying IFR, and are often available in two or more series of charts, one with lower routes and one with higher routes. In each country's AIP (section ENR 6, En-route charts) are often small scale IFR charts.

VFR charts

VFR charts are mainly used when flying VFR, but can be used when flying IFR as well. In general they are in a larger scale than the IFR charts. In addition to the information of the IFR charts, they also contain information found on a regular topographic map such as representation of the terrain, water features, infrastructure, populated areas etc.

VFR charts are used for VFR and shorter IFR route planning and while flying VFR using pilotage and dead reckoning. They are available in many different scales and with many different symbologies, often different from country to country.

Procedure charts

Procedure charts are used when departing from an airport after take off or approaching an airport before landing. Airstrips and smaller airports only used in VFR conditions rarely have any as the traffic intensity and surrounding areas doesn't demand the use of one.

There are three very distinct types of procedure charts:

  • Approach plates which are depicting the area around the airport. They are usually for either visual approach, or several for instrument approach for each runway, each chart using different navigation aids.
  • STARs (Standard terminal arrival routes), which are describing instrument arrival routes, often several for each runway depending on the direction of arrival. Usually starting at a named fix along the route to the airport.
  • SIDs (Standard instrument departures), which are describing instrument departure routes, often several for each runway depending on the direction of departure. Usually ending at a named fix along the route from the airport.

Chart resources

Mixed charts

VFR charts

AIP

1rightarrow.png See Aeronautical information publication for the main article about this subject.

Aeronautical information publication (AIP) is defined by the International Civil Aviation Organization (ICAO) as a publication issued by or with the authority of a state and containing aeronautical information of a lasting character essential to air navigation. AIPs normally have three parts: General (GEN), En route (ENR) and Aerodromes (AD).

The AIP contains many charts. Most of these are in the AD section where details and charts of all public aerodromes are published, sometimes charts with the air routes can be found in ENR.