Flying the Shuttle - Launch: Difference between revisions

From FlightGear wiki
Jump to navigation Jump to search
mNo edit summary
Line 1: Line 1:
{{Note|This article refers to the {{AircraftHangar|aircraft=SpaceShuttle}} in the FGAddon repository.}}


{{Note|This article refers to the {{AircraftHangar|aircraft=SpaceShuttle}} in the FGAddon repository. }}
This mission phase can directly be started using <code>--aircraft=SpaceShuttle-launch</code> on the command line.
 
This mission phase can directly be started using <b>--aircraft=SpaceShuttle-launch</b> on the command line.


== What are we trying to do? ==
== What are we trying to do? ==
The launch phase of the Shuttle lasts from ignition of the main engines until the shuttle reaches orbit. This is a surprisingly short time, all in all just about eight minutes. During this time, an enormous amount of propellant is spent accelerating the orbiter to Mach 26 at an altitude of 150 km. The complete launch stack consists of the orbiter, mounted on the external tank (ET) which supplies propellant for the Space Shuttle Main Engines (SSMEs), assisted by two solid rocket boosters (SRBs).


The launch phase of the Shuttle lasts from ignition of the main engines till the shuttle reaches orbit. This is a surprisingly short time, all in all just about eight minutes. During this time, an enormous amount of propellant is spent accelerating the orbiter to Mach 26 at an altitude of 150 km. The complete launch stack consists of the orbiter, mounted on the external tank (ET) which supplies propellant for the Space Shuttle Main Engines (SSMEs), assisted by two solid rocket boosters (SRBs).
The first two minutes of the flight pass through the atmosphere, during this time the SRBs provide most of the thrust. The SRBs can not be throttled, once on, they burn till they are spent. At an altitude of about 150,000 ft the SRBs are disconnected and the shuttle accelerates only using the main engines fed from the ET which is disconnected just before reaching orbit.
 
The first two minutes of the flight pass through the atmosphere, during this time the SRBs provide most of the thrust. The SRBs can not be throttled, once on, they burn till they are spent. At an altitude of about 150.000 ft the SRBs are disconnected and the shuttle accelerates only using the main engines fed from the ET which is disconnected just before reaching orbit.
 
The tasks are hence


* bring the orbiter safely through the atmosphere
The tasks are hence:
* steer towards a launch course corresponding to an orbit with the desired inclination
* Bring the orbiter safely through the atmosphere
* accelerate to orbital speed outside the atmosphere
* Steer towards a launch course corresponding to an orbit with the desired inclination
* Accelerate to orbital speed outside the atmosphere


[[File:Shuttle FG03.jpg|600px|Space Shuttle Launch]]
[[File:Shuttle FG03.jpg|600px|Space Shuttle Launch]]
== Some theory ==


== How it feels in FG ==
== How it feels in FG ==
The launch dynamics in FG is, if we neglect the noise and the shaking of the real thing (which is described as 'driving down a rough gravel road without any suspension, a shaking so hard the eyes cannot properly focus' as long as the SRBs are burning) probably fairly realistic.
The launch dynamics in FG is, if we neglect the noise and the shaking of the real thing (which is described as 'driving down a rough gravel road without any suspension, a shaking so hard the eyes cannot properly focus' as long as the SRBs are burning) probably fairly realistic.


Line 43: Line 34:
Seen from the ground, the smoke trail of the launch shows clearly the point at which the shuttle departs from vertical ascent and reduces pitch.
Seen from the ground, the smoke trail of the launch shows clearly the point at which the shuttle departs from vertical ascent and reduces pitch.


 
At around 150,000 ft altitude, the SRBs separate. They're still burning for a while, but they won't generate any thrust. While they seem to fall back, they actually continue to rise - just the shuttle accelerates away from them at a faster pace.
 
At around 150.000 ft altitude, the SRBs separate. They're still burning for a while, but they won't generate any thrust. While they seem to fall back, they actually continue to rise - just the shuttle accelerates away from them at a faster pace.


[[File:Shuttle SRBsep03.jpg|600px|SRB separation]][[File:Shuttle SRBsep04.jpg|600px|SRB separation]]
[[File:Shuttle SRBsep03.jpg|600px|SRB separation]][[File:Shuttle SRBsep04.jpg|600px|SRB separation]]
Line 53: Line 42:
Outside of the atmosphere, handling characteristics are much improved, but there's now no friction, so every motion has to be explicitly canceled. Time to fine-tune the launch course - watch inclination in the HUD to insert into an orbit at a given inclination now.
Outside of the atmosphere, handling characteristics are much improved, but there's now no friction, so every motion has to be explicitly canceled. Time to fine-tune the launch course - watch inclination in the HUD to insert into an orbit at a given inclination now.


Pitch should be gradually reduced to about 30 deg, still in inverted flight. The reason for this is communication (not implemented in FG) - at this point the Shuttle has contact to ground stations in the Caribbean for a proper launch trajectory. Watch vertical velocity and adjust pitch to get it to zero out at about 150 km altitude. Watch launch course and don't allow large deviations any more - they will reduce your reserves to make orbit.
Pitch should be gradually reduced to about 30 deg, still in inverted flight. The reason for this is communication (not implemented in FG) at this point the Shuttle has contact to ground stations in the Caribbean for a proper launch trajectory. Watch vertical velocity and adjust pitch to get it to zero out at about 150 km altitude. Watch launch course and don't allow large deviations any more they will reduce your reserves to make orbit.


You will almost inevitably drop in altitude for a bit from there - that's normal, and it'll recover once the ET gets light when all the fuel is spent and thrust increases. Roll out of inverted flight about 5 minutes into the launch to be realistic (the shuttle makes now communication via the satellite network and no longer directly with the ground).
You will almost inevitably drop in altitude for a bit from there that's normal, and it'll recover once the ET gets light when all the fuel is spent and thrust increases. Roll out of inverted flight about 5 minutes into the launch to be realistic (the shuttle makes now communication via the satellite network and no longer directly with the ground).


<b>What should not happen is that the trajectory drops below 265.000 ft - the reason is ET heat load. The ET is equipped with an ablator to take care of the worst of friction heat, but if you go too fast too low, the heat shield will fail and the ET will explode.</b>
<b>What should not happen is that the trajectory drops below 265.000 ft the reason is ET heat load. The ET is equipped with an ablator to take care of the worst of friction heat, but if you go too fast too low, the heat shield will fail and the ET will explode.</b>


At this stage, the thrust vector is not very aligned with the shuttle axis - note how the SSME pointed out of the axis push through the ETs top-heavy CoG:
At this stage, the thrust vector is not very aligned with the shuttle axis note how the SSME pointed out of the axis push through the ETs top-heavy CoG:


[[File:Shuttle FG5.jpg|600px|Final stage in the flight to orbit]]
[[File:Shuttle FG5.jpg|600px|Final stage in the flight to orbit]]


Once the ET depletes, thrust builds up. Watch acceleration and throttle back to keep it below 3 g (which is the structural limit of the stack on ascent). Manging vertical velocity should be easy at this point, there's plenty of thrust so that pitch has an immediate and strong effect on vertical speed. Keep it close to zero and maintain 150 km altitude. Keep an eye on the perigee counter now - once you are close to orbital velocity, it moves fast. Reduce thrust as soon as it comes above zero, cut thrust once the apogee reaches the desired value and drop the external tank - the final push into orbit is done by the orbital maneuvering system (OMS). The reaction control system (RCS) will come on automatically, enabling you to null any remaining rotation of the orbiter.
Once the ET depletes, thrust builds up. Watch acceleration and throttle back to keep it below 3 g (which is the structural limit of the stack on ascent). Manging vertical velocity should be easy at this point, there's plenty of thrust so that pitch has an immediate and strong effect on vertical speed. Keep it close to zero and maintain 150 km altitude. Keep an eye on the perigee counter now - once you are close to orbital velocity, it moves fast. Reduce thrust as soon as it comes above zero, cut thrust once the apogee reaches the desired value and drop the external tank - the final push into orbit is done by the orbital maneuvering system (OMS). The reaction control system (RCS) will come on automatically, enabling you to null any remaining rotation of the orbiter.
Line 69: Line 57:


Good luck, you're ready to do orbital maneuvering.
Good luck, you're ready to do orbital maneuvering.
== Further reading ==

Revision as of 08:04, 20 April 2015

Note  This article refers to the SpaceShuttle in the FGAddon repository.

This mission phase can directly be started using --aircraft=SpaceShuttle-launch on the command line.

What are we trying to do?

The launch phase of the Shuttle lasts from ignition of the main engines until the shuttle reaches orbit. This is a surprisingly short time, all in all just about eight minutes. During this time, an enormous amount of propellant is spent accelerating the orbiter to Mach 26 at an altitude of 150 km. The complete launch stack consists of the orbiter, mounted on the external tank (ET) which supplies propellant for the Space Shuttle Main Engines (SSMEs), assisted by two solid rocket boosters (SRBs).

The first two minutes of the flight pass through the atmosphere, during this time the SRBs provide most of the thrust. The SRBs can not be throttled, once on, they burn till they are spent. At an altitude of about 150,000 ft the SRBs are disconnected and the shuttle accelerates only using the main engines fed from the ET which is disconnected just before reaching orbit.

The tasks are hence:

  • Bring the orbiter safely through the atmosphere
  • Steer towards a launch course corresponding to an orbit with the desired inclination
  • Accelerate to orbital speed outside the atmosphere

Space Shuttle Launch

How it feels in FG

The launch dynamics in FG is, if we neglect the noise and the shaking of the real thing (which is described as 'driving down a rough gravel road without any suspension, a shaking so hard the eyes cannot properly focus' as long as the SRBs are burning) probably fairly realistic.

As soon as the throttle is moved to 65%, the main engines ignite. This is the starting signal for SRB ignition, the SRBs will follow three seconds later, and once they burn, there is no going back. The SRBs can not be throttled and will burn till exhausted, and they have enough thrust to lift the stack even if the main engine is switched off.

Space Shuttle Launch

Upon ascent, the shuttle is controlled by thrust vectoring of both the SRBs and the SSME. About ten seconds after liftoff while the dynamical pressure is still small, roll the shuttle to the desired launch course, then pull slightly down to a pitch of 80-85 degrees of inverted flight (the journey into orbit is flown with the head hanging down). You should now verify that you are approximately (within 10-20 degrees) on your launch course. Don't worry about details, they can be fixed later.

At about 35 seconds into the flight, dynamical pressure (qbar) will rise rapidly as the stack goes supersonic. This is a dangerous phase of the flight. The stack is very top-heavy (as the heavy oxygen is stored in the tip of the ET and the light hydrogen in the bottom), so once it starts toppling, it won't come back. In addition, aerodynamical forces are very strong. In fact the very reason we do this phase in inverted flight is to reduce the wing loading. At the callout, reduce throttle of the main engines to 65% to minimize the pressure spike.

If you ascent is too flat in this phase, maximum qbar will be violated, or more likely, you'll lose control of the stack beyond the point the thrust vectoring can recover.

About 20 seconds later, max. qbar is over and the stack becomes much more controllable. Throttle up to full and reduce pitch to about 60 degrees (still inverted) and keep rising.

Launch track of the Space Shuttle

Seen from the ground, the smoke trail of the launch shows clearly the point at which the shuttle departs from vertical ascent and reduces pitch.

At around 150,000 ft altitude, the SRBs separate. They're still burning for a while, but they won't generate any thrust. While they seem to fall back, they actually continue to rise - just the shuttle accelerates away from them at a faster pace.

SRB separationSRB separation

With the SRBs gone and most of the fuel still in the tank, thrust is down from abut 2.5 g to less than 1 g - which means that the stack no longer gains vertical velocity. Nevertheless, there's still a tremendous vertical velocity left, so the shuttle will continue to rise until this is depleted.

Outside of the atmosphere, handling characteristics are much improved, but there's now no friction, so every motion has to be explicitly canceled. Time to fine-tune the launch course - watch inclination in the HUD to insert into an orbit at a given inclination now.

Pitch should be gradually reduced to about 30 deg, still in inverted flight. The reason for this is communication (not implemented in FG) – at this point the Shuttle has contact to ground stations in the Caribbean for a proper launch trajectory. Watch vertical velocity and adjust pitch to get it to zero out at about 150 km altitude. Watch launch course and don't allow large deviations any more – they will reduce your reserves to make orbit.

You will almost inevitably drop in altitude for a bit from there – that's normal, and it'll recover once the ET gets light when all the fuel is spent and thrust increases. Roll out of inverted flight about 5 minutes into the launch to be realistic (the shuttle makes now communication via the satellite network and no longer directly with the ground).

What should not happen is that the trajectory drops below 265.000 ft – the reason is ET heat load. The ET is equipped with an ablator to take care of the worst of friction heat, but if you go too fast too low, the heat shield will fail and the ET will explode.

At this stage, the thrust vector is not very aligned with the shuttle axis – note how the SSME pointed out of the axis push through the ETs top-heavy CoG:

Final stage in the flight to orbit

Once the ET depletes, thrust builds up. Watch acceleration and throttle back to keep it below 3 g (which is the structural limit of the stack on ascent). Manging vertical velocity should be easy at this point, there's plenty of thrust so that pitch has an immediate and strong effect on vertical speed. Keep it close to zero and maintain 150 km altitude. Keep an eye on the perigee counter now - once you are close to orbital velocity, it moves fast. Reduce thrust as soon as it comes above zero, cut thrust once the apogee reaches the desired value and drop the external tank - the final push into orbit is done by the orbital maneuvering system (OMS). The reaction control system (RCS) will come on automatically, enabling you to null any remaining rotation of the orbiter.

In reality, propellant is calculated rather closely to the needs. In FG, without a payload, especially launching due east, you may arrive in orbit with some leftover propellant, potentially enabling to reach a rather high orbit. Take on a heavy payload and launch on a high inclination, and that may change.

Good luck, you're ready to do orbital maneuvering.