Douglas DC-8-73

From FlightGear wiki
Revision as of 23:42, 17 February 2010 by Yourgod (talk | contribs) (Updated status, added some notes, added known issues.)
Jump to navigation Jump to search
This article is a stub. You can help the wiki by expanding it.
Douglas DC-8-73
DC8.jpg
Type Airliner, freighter
Author(s) Bob Faulkner
FDM JSBSim
--aircraft= /dc8-73
/dc8-73

/dc8-73

/dc8-73

/dc8-73

/dc8-73

/dc8-73

/dc8-73

/dc8-73

/dc8-73

/dc8-73
Status Early Development

The Douglas DC-8 was the first entry into the commercial jet airliner market fielded by Douglas Aircraft. It is a 4 engine model. The 70 series variants, also known as the "super 70's", are "super 60's" airframes upgraded with CFM56 engines. These represent the versions with the greatest range, fuel efficiency, take off weight, and least noise.

This project was started at the end of December, 2009.


Fuel Tank mapping
FG Tank DC-8 tank
0 1 main
1 2 main
2 3 main
3 4 main
4 1 alt
5 4 alt
6 center
7 aux

Note that the Auxiliary tanks are 2 tanks near each wing root contained in the leading edges of the wings. In this model, those tanks are modeled as a single tank with a location between the leading edges, on the center line of the fuselage. This roughly models an evenly distributed fuel load between the two tanks, which should be the case in real life.

Status

This model is currently in the pre-alpha phase. The target release date for the alpha version is before the end of February, 2010.

Model as of January 29, 2010

Dc8 012110.png

TODO

Done:

  • Basic fuselage
  • Horizontal and vertical stabilizers
  • Basic FDM (basic DC-8 tuning completed)
  • Wings
  • Wheels (animated)
  • Gear struts (basic, animated)
  • Engines (fans and reversers animated)
  • Ailerons, Flaps (animated)
  • Rudder and Elevators (animated)
  • Windows and refine fuselage model.
  • Gear wells and doors (animated)

Current stage:

  • ATI (Air Transport International) livery, default on model.
  • Basic cockpit

To do (in order of attack):

  • Alpha Release
  • Full Cockpit model
  • Slats and Exhaust gates
  • Doors
  • Add External details (Lights, pitot, etc)
  • Control and trim tabs.
  • Refine animations to respect DC-8 behaviors.
  • Near completed Cockpit functionality.
  • Refine FDM
  • Beta Release
  • Finalize cockpit (fully modeled down to books on shelves)
  • Finalize any outstanding details of model (bits and pieces needed for realism)
  • Finalize FDM
  • Final Release

Known issues

Unresolved:

  • Nose gear do not always return to center steering angle when leaving the ground.