Building FlightGear - Debian
HowTo build FlightGear 2.10.0 or bleeding edge development version, hereinafter simply called GIT, on GNU/Linux Debian Stable/Squeeze. Users of Oldstable, Testing/Wheezy or Unstable at least have to change package names (version numbering) accordingly.
The meaning of this article is to be a short, checklist like, overview of the specific steps to compile FlightGear and components on Debian. For more detailed information please refer to the main article Building FlightGear on Linux.
If you don't want to get your hands dirty, have a look at Scripted Compilation on Linux Debian/Ubuntu.
- 1 Requirements and Preparations
- 2 Build and install
- 3 Trial run and finishing process
- 4 Optional Software
Requirements and Preparations
A bunch of packages (as well as some of their dependencies) are required to compile FlightGear:
su -c "apt-get install automake cmake g++ gcc git make subversion unzip"
- Additionally install "fluid" if you intend to use fgadmin.
Command for Squeeze, users of other releases are advised to check package versions:
su -c "apt-get install \ freeglut3-dev libboost-dev libcurl4-openssl-dev libgtkglext1-dev \ libjpeg8-dev libopenal-dev librsvg2-dev libsvn-dev \ libxml2-dev libxrandr-dev"
- If you prefer you might replace "libcurl4-openssl-dev" by "libcurl4-gnutls-dev".
- Add "libudev-dev" if you need FG's feature
- During installation development packages of libraries which are going to be compiled must not be installed. They can safely be re-installed after compilation. Namely here these might be "libplib-dev", "libfltk1.1-dev", "libopenscenegraph-dev" and "simgear-dev".
Build and install
Because we are going to install versions different to the ones in the Debian repositories, it is recommended to install FlightGear in a place independent of the base system, such as
$HOME/FG-2.10.0. This way also has the advantage of easily managing several FlightGear versions, even with different versions of OpenSceneGraph and/or plib, simply by altering the installation prefix. I suggest to make this directory writeable by the user so there is no need to become root for the
make -j2 install commands. We'll use
$prefix as a placeholder for this directory.
Another placeholder will be
$srcdir, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So, in the instructions below, you have to replace these with the local paths or even
export them (in every terminal you're using them) for the process:
export prefix=$HOME/FG-2.10.0 && mkdir $prefix export srcdir=$HOME/src && mkdir $srcdir
Have in mind that the data is a relatively large download (GIT about 5 GB and 2.10.0 650 MB). So, to save some time, it is a good idea to fetch it while building the sources.
For some basic info on git commands for FlightGear users we have a git for dummies section.
To have a build with debugging symbols add
-D CMAKE_BUILD_TYPE="RelWithDebInfo" to SimGear's and FlightGear's cmake options.
FLTK only is required for fgadmin, which is content with libfltk-1.1, and fgrun, which minimum is libfltk-1.3.
Wheezy: Just install package "libfltk1.3-dev" if you're planning to use either of them.
Squeeze: For fgadmin just install package "libfltk1.1-dev". To compile fgrun, too, build and install FLTK-1.3 instead:
cd $srcdir wget http://ftp.easysw.com/pub/fltk/1.3.2/fltk-1.3.2-source.tar.gz tar xzf fltk-1.3.2-source.tar.gz cd fltk-1.3.2 ./configure --enable-shared --prefix=$prefix make -j2 install
2.10.0 and GIT: Latest SVN is required.
cd $srcdir svn co https://plib.svn.sourceforge.net/svnroot/plib/trunk plib cd plib sed s/PLIB_TINY_VERSION\ \ 5/PLIB_TINY_VERSION\ \ 6/ -i src/util/ul.h ./autogen.sh ./configure --prefix=$prefix make -j2 install
For 2.10.0 on Wheezy skip that step and install package "libopenscenegraph-dev" instead.
GIT users, especially developers, most likely want to use the latest DeveloperRelease or even bleeding edge code here.
2.10.0 and GIT:
cd $srcdir svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/tags/OpenSceneGraph-3.1.1 OpenSceneGraph mkdir build-osg; cd build-osg cmake -D CMAKE_BUILD_TYPE="Release" -DLIB_POSTFIX="" \ -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/OpenSceneGraph make -j2 install
2.10.0 and GIT:
cd $srcdir git clone git://mapserver.flightgear.org/simgear
cd simgear git checkout -b 2.10.0 origin/release/2.10.0
2.10.0 and GIT:
mkdir $srcdir/build-sg; cd $srcdir/build-sg cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/simgear make -j2 install
2.10.0 and GIT:
cd $srcdir git clone git://mapserver.flightgear.org/flightgear
cd flightgear git checkout -b 2.10.0 origin/release/2.10.0
2.10.0 and GIT:
mkdir $srcdir/build-fg; cd $srcdir/build-fg cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/flightgear make -j2 install
2.10.0 only: Please have a look at the mirror list for a server close to your location.
cd $prefix wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.10.0.tar.bz2 tar xjf FlightGear-data-2.10.0.tar.bz2
For slow/unstable internet connections it is recommended to download the fgdata.bundle instead of cloning the data.
cd $prefix git clone git://mapserver.flightgear.org/fgdata data
Trial run and finishing process
When all the builds are done and the data download has finished it is time for a test run:
export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH $prefix/bin/fgfs --fg-root=$prefix/data
fgfsbinary needs to find our self compiled libraries at runtime and therefore we have to tell the linker (ld) where to find them. That is what the first line here does. You might want to add this line to your
$HOME/.bashrcto have this as a persistent setting (may cause problems, if one has installed more than one version of FlightGear!).
- Have in mind, the
$srcdirvariables are available for this session only. For future use of these lines, replace them by the real paths.
To avoid the need to give the path to the
fgfs command each time, you might consider to create a symlink at a place that is listed in $PATH:
ln -s $prefix/bin/fgfs $HOME/bin/fgfs
| Work in progress|
This article or section will be worked on in the upcoming hours or days.
Note: Revise due to update to FG 2.10
See for the latest developments.
Feel free to add the commands to install other FlightGear related projects.
One more Package has to be installed: "libglew1.5-dev"
cd $srcdir git clone http://mapserver.flightgear.org/git/atlas cd atlas ./autogen.sh ./configure --prefix=$prefix --with-fgbase=$prefix/data make -j2 install cp -R $srcdir/atlas/src/data/* $prefix/data/Atlas
For fgcom install package "libasound2-dev".
cd $srcdir svn co https://appfgcom.svn.sourceforge.net/svnroot/fgcom/trunk fgcom cd fgcom/src make -j2 install_BIN=$prefix/bin INSTALL_DIR=$prefix/fgcom \ PLIB_PREFIX=$prefix [OPENAL_PREFIX=$prefix] install
Create an .alsoftrc file as shown in FGCOM Testing.
cd $srcdir git clone git://gitorious.org/fg/fgrun.git
cd fgrun git checkout -b 1.7.0 origin/release/1.7.0
2.10.0 and GIT:
mkdir $srcdir/fgrun-build; cd $srcdir/fgrun-build cmake -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/fgrun make -j2 install
2.10.0 and GIT:
export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH $prefix/bin/fgrun
- either "libcurl4-gnutls-dev" or "libcurl4-openssl-dev" for curl.h
- "wx2.8-headers" (at least, maybe even more than just that one. Please report!
su -c "aptitude install [libcurl4-gnutls-dev|libcurl4-openssl-dev]" cd $srcdir git clone git://mapserver.flightgear.org/taxidraw cd taxidraw ./autogen.sh ./configure --prefix=$prefix make -j2 install
If you are familiar with "download_and_compile.sh" script from Brisa you can donwload this script: http://clemaez.fr/flightgear/terragear_download_and_compile.sh This script is similar to Brisa's one (only usable for Debian/Ubuntu/Mint...). This script installs TerraGear (latest version) and terragear-gui.
- How to use it?
sh terragear_download_and_compile.sh -j 2 ALL
-j 2 option is for Dual Core, you can tune it as you want. (personnaly I have Quad Core and I use -j 12 but I need to accept to don't use my aircraft during compilation ;) )
- Need some help?
Look at forum topics : http://www.flightgear.org/forums/viewtopic.php?f=20&t=14849
After success installation you can exectute this command line in the terragear/bin directory in order to display every --help for each binary files:
cd terragear/bin && for i in `ls`; do echo ""; echo "################# "$i" ##############"; ./$i --help; done
To resolve some of the dependencies of TerraGear the GIT sections of steps plib, OpenSceneGraph and SimGear have to be done first. Additionally some packages and their dependencies have to be installed:
- libgdal1-dev, gdal-bin
- libproj-dev, libogdi3.2-dev (probably even more, please report!)
Wheezy: As of June 2nd there is a bug (#617240) in package libmysqlclient16 which causes compilation to fail. If it is not fixed by the time you're building TerraGear, upgrade to the version from Sid.
cd $srcdir git clone git://mapserver.flightgear.org/terragear-cs
# gpc install mkdir $srcdir/gpc232 && cd $srcdir/gpc232 wget ftp://ftp.cs.man.ac.uk/pub/toby/gpc/gpc232-release.zip unzip gpc232-release.zip sed s/DBL_EPSILON/0.000001/ -i gpc.h grep -A 18 '# Unix/Linux makefile' $srcdir/terragear-cs/README.gpc > Makefile sed "s|/usr/local/lib|$prefix/lib|" -i Makefile sed "s|/usr/local/include|$prefix/include|" -i Makefile make -j2 install # newmat install mkdir $srcdir/newmat11 && cd $srcdir/newmat11 wget http://www.robertnz.net/ftp/newmat11.tar.gz tar xzfv newmat11.tar.gz make -f nm_gnu.mak cp libnewmat.a $prefix/lib mkdir $prefix/include/newmat cp *.h $prefix/include/newmat
Finally TerraGear itself (See README for details.):
cd $srcdir/terragear-cs ./autogen.sh ./configure --prefix=$prefix sed s/-O2// -i src/Lib/TriangleJRS/Makefile make -j2 install
Because this is the same for all Linux distributions the instructions are not listed here separately. Please refer to our lead WED article.