Hi fellow wiki editors!

To help newly registered users get more familiar with the wiki (and maybe older users too) there is now a {{Welcome to the wiki}} template. Have a look at it and feel free to add it to new users discussion pages (and perhaps your own).

I have tried to keep the template short, but meaningful. /Johan G

Difference between revisions of "Building FlightGear - Debian"

From FlightGear wiki
Jump to: navigation, search
(update on OSG)
m (... oops :D)
Line 21: Line 21:
 
*libboost1.37-dev (min 1.37, 1.40 available for Lenny on backports.debian.org)
 
*libboost1.37-dev (min 1.37, 1.40 available for Lenny on backports.debian.org)
  
During installation package ''simgear-dev'' '''must not''' be installed. It can safely be re-installed after compilation. Same for ''openscenegraph-dev'', if you're using a version other than in the Debian repository.
+
During installation package ''simgear-dev'' '''must not''' be installed. It can safely be re-installed after compilation. Same for ''openscenegraph-dev'', if you're using a version differnt to that in the Debian repository.
  
  
 
== Build and install ==
 
== Build and install ==
Because we are going to install versions different to the ones in the repositries it is recommended to install FG-2.2.0 and/or GIT in a place independent to the base system such as /usr/local/FG-2.2.0, /opt/FG-2.2.0 or in a subdirectory of your $HOME. I suggest to make it writeable by the user that there is no need to become root for the <code>make install</code> commands. I'll use <code>$prefix</code> as a placeholder for this directory. <BR>
+
Because we are going to install versions different to the ones in the repositories it is recommended to install FG-2.2.0 and/or GIT in a place independent to the base system such as /usr/local/FG-2.2.0, /opt/FG-2.2.0 or in a subdirectory of your $HOME. I suggest to make it writeable by the user that there is no need to become root for the <code>make install</code> commands. I'll use <code>$prefix</code> as a placeholder for this directory. <BR>
Another one will be <code>$srcdir</code>, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So in the following instructions you have to replace these with the local paths or even <code>export</code> them during the process.
+
Another one will be <code>$srcdir</code>, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So, in the following instructions, you have to replace these with the local paths or even <code>export</code> them during the process.
 
+
 
+
Follow the instructions listed below to fetch the sources and the data needed by FlightGear and the commands to build/install each source.
+
  
 
Have in mind that the data is a relatively large download (GIT about 3.5 GB and 2.2.0 300 MB). So, to save some time, it is a good idea to fetch it while building the sources.
 
Have in mind that the data is a relatively large download (GIT about 3.5 GB and 2.2.0 300 MB). So, to save some time, it is a good idea to fetch it while building the sources.

Revision as of 04:37, 27 February 2011

HowTo build on Debian

HowTo build FlightGear 2.2.0 or bleeding edge development version, hereinafter simply called GIT, on GNU/Linux Debian Stable 6.x (Squeeze) and Testing (Wheezy).

Even on Debian Oldstable 5.x (Lenny) this guide will work for both, 2.2.0 and GIT. At least until one or more dependencies of the GIT version are changing or beeing added.

If you don't want to make your hands dirty, have a look at Scripted_Compilation_on_Linux_Debian/Ubuntu.


Requirements and Preparations

You need an OpenGL capable graphics including a proper installed driver.

Also a bunch of packages (and some of their dependencies) are required:

  • gcc, g++, make, automake, pkg-config
  • mawk (or gawk)
  • cmake (min. version 2.6.0-5)
  • git, subversion, wget
  • freeglut3-dev, libgl1-mesa-dev, libxrandr-dev
  • libxi-dev, libxmu-dev, libxext-dev
  • libopenal-dev (for Lenny see libopenal), libalut-dev
  • libjpeg62-dev, libtiff4-dev, libpng12-dev
  • libboost1.37-dev (min 1.37, 1.40 available for Lenny on backports.debian.org)

During installation package simgear-dev must not be installed. It can safely be re-installed after compilation. Same for openscenegraph-dev, if you're using a version differnt to that in the Debian repository.


Build and install

Because we are going to install versions different to the ones in the repositories it is recommended to install FG-2.2.0 and/or GIT in a place independent to the base system such as /usr/local/FG-2.2.0, /opt/FG-2.2.0 or in a subdirectory of your $HOME. I suggest to make it writeable by the user that there is no need to become root for the make install commands. I'll use $prefix as a placeholder for this directory.
Another one will be $srcdir, it stands for the absolute path to the directory which is supposed to keep the folders of the various source codes. So, in the following instructions, you have to replace these with the local paths or even export them during the process.

Have in mind that the data is a relatively large download (GIT about 3.5 GB and 2.2.0 300 MB). So, to save some time, it is a good idea to fetch it while building the sources.

For some basic info on git commands for FlightGear users we have a git for dummies section.


libopenal

Lenny only! The libopenal-dev package in Lenny is too old for fgcom. For FlightGear it does work but not all features (like doppler) are available, so installing an up to date version is recommended anyway.

cd $srcdir
wget http://kcat.strangesoft.net/openal-releases/openal-soft-1.11.753.tar.bz2
tar xjf openal-soft-1.11.753.tar.bz2
cd openal-soft-1.11.753/build
cmake  -D CMAKE_INSTALL_PREFIX:PATH="$prefix" ..
make install


plib

Latest SVN is recommended, yet package plib1.8.5-dev for Squeeze does work as well.

cd $srcdir
svn co https://plib.svn.sourceforge.net/svnroot/plib/trunk plib
cd plib
sed s/PLIB_TINY_VERSION\ \ 5/PLIB_TINY_VERSION\ \ 6/ -i src/util/ul.h
./autogen.sh
./configure --prefix=$prefix
make install


OpenSceneGraph

2.2.0 only:

su -c "apt-get install libopenscenegraph-dev"

GIT only: Mostly the latest revision from OpenSceneGraph svn does suit. However, sometimes this does not work and as a fallback one can go backwards through the revisions. Revision must be at least 12170 (February 2011).

cd $srcdir
svn co http://www.openscenegraph.org/svn/osg/OpenSceneGraph/trunk OpenSceneGraph
ln -s lib $prefix/lib64   # 64bit OS' only, if lib64 does not exist
mkdir osg-build && cd osg-build
cmake -D CMAKE_BUILD_TYPE="Release" \
      -D CMAKE_INSTALL_PREFIX:PATH="$prefix" $srcdir/OpenSceneGraph
make install


SimGear

2.2.0 and GIT:

cd $srcdir
git clone git://gitorious.org/fg/simgear.git simgear
cd simgear

2.2.0 only:

git checkout -b releases/2.2.0 origin/releases/2.2.0

2.2.0 and GIT:

./autogen.sh
./configure --prefix=$prefix 
make install


FlightGear source

2.2.0 and GIT:

cd $srcdir
git clone git://gitorious.org/fg/flightgear.git flightgear
cd flightgear

2.2.0 only:

git checkout -b releases/2.2.0 origin/releases/2.2.0

2.2.0 and GIT:

./autogen.sh
./configure --prefix=$prefix 
make install


FlightGear data

2.2.0 only: At the time of writing, 2.2.0 is not yet released, there is no tar archive for the data available. Test pilots for this release are advised to use the release/2.2.0 branch from git. The following URL for wget will be updated, if it is not working, as soon as 2.2.0 is released.

cd $prefix
wget http://mirrors.ibiblio.org/pub/mirrors/flightgear/ftp/Shared/FlightGear-data-2.2.0.tar.bz2
tar xjf FlightGear-data-2.2.0.tar.bz2

GIT only: For slow/unstable internet connections it is recommended to download the fgdata.bundle instead of cloning the data.
FlightGear's primary git server on gitorious is known to have trouble cloning the data, the mapserver's mirror usually has no problems:

cd $prefix
git clone git://mapserver.flightgear.org/fgdata


Trial run

When all the builds are done and the data download has finished it is time for a test run:

export LD_LIBRARY_PATH=$prefix/lib/:$LD_LIBRARY_PATH
$prefix/bin/fgfs --fg-root=$prefix/fgdata

For the future, if you want to start FlightGear from command line have a look at fgfsrc, if you prefer a graphical user interface continue with compiling fgrun or check FGo!. Have in mind that fgfs need to find our self compiled libraries and therefore we have to tell the linker (ld) where to find them. That is what the first line here does.


Optional Software

Feel free to add the commands to install other FlightGear related projects.

fgcom

For fgcom unfortunately there is one more dependency which cannot be solved with packages on Lenny, see libopenal.

cd $srcdir
svn co https://appfgcom.svn.sourceforge.net/svnroot/fgcom/trunk fgcom
cd fgcom/src
make INSTALL_BIN=$prefix/bin INSTALL_DIR=$prefix/fgcom \
   PLIB_PREFIX=$prefix OPENAL_PREFIX=$prefix install


fgrun

To build fgrun one more package is required:

  • libfltk1.1-dev
cd $srcdir
svn co http://fgrun.svn.sourceforge.net/svnroot/fgrun/trunk fgrun
cd fgrun/fgrun/
./autogen.sh
./configure --prefix=$prefix
make install