The Boeing 787-8, the first model of the aircraft to see production.The 787-8 is the base model of the 787 family with a length of 186 feet (57 m) and a wingspan of 197 feet (60 m) and a range of 7,650 to 8,200 nautical miles (14,200 to 15,200 km) depending on seating configuration. The 787-8 seats 210 passengers in a three class configuration. The variant will be the first of the 787 line to enter service in 2010.
The Boeing 787 Dreamliner is a mid-sized, wide-body, twin engine jet airliner currently under development by Boeing Commercial Airplanes. It will carry between 210 and 330 passengers depending on variant and seating configuration. Boeing has stated that it will be more fuel-efficient than earlier Boeing airliners and will also be the first major airliner to use composite materials for most of its construction. Boeing's development of the 787 is also innovative in the collaborative management approach with suppliers.
Until January 28, 2005, the 787 was known by the developmental designator 7E7. Early released concept images depicted a radical design with highly curved surfaces. On April 26, 2005, a year after the launch of the program, the final look of the external 787 design was frozen, with a less rakish nose and a more conventional tail.
Boeing featured its first 787 in a rollout ceremony on July 8, 2007 at its assembly factory in Everett, Washington, by which time it had become the fastest-selling wide body airliner in history with nearly 600 orders. Originally scheduled to enter service in May 2008, production has been delayed and it is currently scheduled to enter into service in late 2009.
This is for the version unfortunately not available on the official Download page , but is available through Git and the version provided in the link above (the link above is newer).
- start APU on electrical panel and wait for its work mode (on EICAS will be message "APU running").
- on APU start on 1 second lights APU FAILURE - this is normal - build-in APU-controller test runs.
- on electrical panel switch on APU generator.
- on engine panel switch on Autostart button and switch on starters.
- wait for engines idle (on EICAS lights off messages L ENG FAILURE, R ENG FAILURE).
- on electrical panel switch on L GEN, R GEN, BKP GEN L, BKP GEN R.
- on electrical panel switch off APU GEN and turn off APU.
If buttons do not work on startup, click on the HUD with the left button and move the view around. Then return to middle view. If the HUD activates, buttons work. In older versions, you may have to middle click on it to rotate it. Middle click or left click on it to move it back into place.
- Approach speed is now 130 KIAS and 8% fuel.
- Service ceiling is around 43000 feet.
- Multiple geometry wing.
- Spoiler script using each wing separately.
- Modified reverse thrust script.
- Pushback added
- Gear smoke (from 777)
- Contrails added
- HUD now is activated only with by clicking on it instead of using FG HUD; it can also be flipped out of the way with middle click.
- HUDs for captain, cockpit operate independently.
- Added copilot view.
- Switches some buttons to pick animations. Some also operate with clicking with left mouse button and clicking on the wheel for coarse switch, and scroll wheel on the mouse for fine tuning.
- The main animation properties that don't normally go over MP now are transferred over MP, such as the engines, wing surface positions, and all lights except those for the cockpit (the cabin lights affect the outside, so they were included).
- Autopilot has been updated to smooth out control surface transitions.
- Paintkit in separate link.
- Development version is not guaranteed to work, but will include some more developments than what is listed on this page. Check the forum thread for more details.
- Redo cockpit to a real 787 type cockpit (see image linked to below)
- LIVERIES: Make more liveries for real 787-8 customers. A list of wanted liveries is included.
- Extend fuselage model and make a 787-9, with FDM as well.
- POSSIBLY: 787-3 and 787-10 models.
- Picture of cockpit.