329
edits
(Rewritten page) |
(Added phraseology up to the approach phase) |
||
Line 130: | Line 130: | ||
* Cleared for takeoff runway ''number'', ''callsign'' | * Cleared for takeoff runway ''number'', ''callsign'' | ||
| The controller authorizes the aircraft to take off. | | The controller authorizes the aircraft to take off. | ||
| This is the ''one and only'' clearance that gives a pilot permission to take off. | | | ||
* This is the ''one and only'' clearance that gives a pilot permission to take off. | |||
* If you are holding short of a runway, this clearance also gives you permission to enter it and align. The controller does ''not'' need to tell you to ''line up and wait'' beforehand. | |||
* If the word ''immediate'' is added, you are only cleared for takeoff if you are able to do so within a very short time. Usually traffic is coming in on the same runway, so do not enter the runway if you are not ready for takeoff in this case. | |||
|- | |- | ||
| | | | ||
Line 151: | Line 154: | ||
! scope="col"| Remarks | ! scope="col"| Remarks | ||
|- | |- | ||
| | | | ||
| | * ''Station'', ''callsign'', passing ''current altitude'', ''climbing (descending)'' to ''altitude'', ''other ATC clearances assigned'' | ||
| | * ''Callsign'', ''station'', radar contact, (squawk ''new squawk code''), (''new clearances'') | ||
| The pilot has just been transferred to another controller and contacts him/her announcing the current altitude, the altitude (s)he was cleared to and any other ATC clearances previously assigned (SID/STAR, etc.). The controller identifies the aircraft on the radar screen, announces so and, if needed, assigns a new squawk code/issues further clearances. | |||
| New clearances/squawk codes should be assigned only if needed. | |||
|- | |||
| | |||
* ''Callsign'', climb (descend) and maintain ''new altitude''. | |||
* Climb (descend) and maintain ''new altitude'', ''callsign''. | |||
| Climb (or descend) to ''new altitude'' and hold it until further instructions are given. | |||
| Flight levels below FL100 should be referred to as two digit numbers (to avoid confusion with headings). | |||
|- | |||
| | |||
* ''Callsign'', turn left (right) heading ''new heading''. | |||
* Turn left (right) heading ''new heading'', ''callsign''. | |||
| The aircraft is instructed to turn left/right to another heading. | |||
| The pilot must execute the turn according to ATC instructions, even if it's not the most direct way. | |||
|- | |||
| | |||
* ''Callsign'', proceed direct ''fix/navaid''. | |||
* Proceeding direct ''fix/navaid'', ''callsign''. | |||
| Proceed along a straight line towards ''fix/navaid''. | |||
| | |||
|} | |} | ||
edits