Search results

...erj (maintainer) - US$25 - payable via PayPal - stefan DOT gofferje AT gmx DOT de

...erj (maintainer) - US$25 - payable via PayPal - stefan DOT gofferje AT gmx DOT de

| {{key press|.}} (dot)

** dot - a simple red dot, similar to an ATC radar. ...the startup pilot aircraft icon mode. Valid values are normal, photo, and dot. See the help of the settings tab more info.

...nctioning weapon systems - payable via PayPal - stefan DOT gofferje AT gmx DOT de

...owing a total of +/- 10 degrees. During the reception of a LOC signal each dot on the CDI scale corresponds to a deviation of 0.5 degrees, a full deflecti ...deflection correspons to a 1.4 degrees difference in the glideslope. A one dot indication showing a deviation of only 0.35 degrees off the glide slope.

The next waypoint is displayed on the screen as a yellow dot. [[ILS]] appear in the same way as VORs, as blue or green arrows. The thick dot in their center is the beginning of the runway. In the following example yo

...green and white texts is your radarscreen. Each dot is a pilot. Beside the dot you find some information about the aircraft (like altitude, speed and head

...dot product of the light source's and normal's direction, you need to use dot('''gl_NormalMatrix*gl_Normal''', gl_LightSource[0].position).

prop06=decdigit # Digit number where should be the dot. ...value'''' on the digit number '''''digit'''''. If decimal is set to 1, the dot on segement display digit will be on.

digitalWrite(9, LOW); // dot digitalWrite(9, LOW); // dot

...from the above line's output} . [NOTE: make sure you get/use the trailing dot!]

** dot - un simple point rouge semblable à un radar ATC. ...éronef du pilote au démarrage. Les valeurs valables sont normal, photo, et dot. Voir l'aide de l'onglet paramètres pour plus d'information.

| yields a centered (raised) dot in <tt>@Y</tt>, <tt>@R</tt>, and <tt>@L</tt> ...0</tt>-<tt>9</tt>, <tt>^l</tt>-<tt>^rd</tt> (8 arrows), <tt>*</tt> (raised dot), <tt>-</tt> (hyphen), <tt>r1</tt>, <tt>r2</tt>, <tt>r3</tt>

#Glidescope pointer (dot above centre = flying below glidescope)

To only look for specific files, we can split each file name using the dot as separator:

...), in addition to <tt>.fgfsrc</tt> from <code>$HOME</code> (with a leading dot in this case).}}

* PDF and Graphviz DOT views of the checklists to aid prototyping ...sting checklists into CLGen source format and to generate PDF and Graphviz DOT representations of existing checklists.

# Do the command exactly as here, including the dot at the end (but put the real ICAO code of your airport of course, instead o

...t, representing the position of the nose of the plane. To the side of this dot are lines representing the position of the wings. These parts of the attitu